Beaglebone Black Rev C1
Debian 8.6 IOT version 2016-11-06
CircuitCo Audio Cape B1


After a long weekend, finally got the Audio Cape B1 overlay to load without 
errors.

But, no audio comes out.

Reading the overlay file source, it indicates that the McASP audio transfer 
format is I2S.

Which would be fine, if it were true.

Putting an oscilloscope on the McASP clock and data leads says the actual 
transfer format being used is 'DSP' which is another standard, but 
incompatible format.

I suspect that the CODEC and the McASP are configured for different 
transfer formats.

Where can I go to read the source files that configure the Sitara McASP 
module?
Where are the source files that configure the CODEC via the I2C bus?
Are these compiled into the kernel? 
Or, are there associated editable configuration files that I can use to 
configure the McASP and the CODEC without having to recompile the kernel?

--- Graham

==

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/6bcabebf-3009-42bd-87d3-9d76090b39c8%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to