Thank you for the input Chris and Dennis,
I have picked up working on the BBB again and tried plugging it into a
display via the mini HDMI and it seems like the beaglebone does not boot
into the OS as all I see is a blinking cursor top left of the screen.
I tried booting from an SD card and
Dennis Lee Bieber wrote:
> On Fri, 18 May 2018 10:21:40 +0100, Chris Green
> declaimed the following:
>
> >The BBB 192.168.6.x address is the one it sets up itself for use over
> >USB (I think) so that won't appear on your ethernet LAN.
> >
> That
yassyass wrote:
> [-- multipart/alternative, encoding 7bit, 141 lines --]
>
> [-- text/plain, encoding quoted-printable, charset: UTF-8, 61 lines --]
>
> Thanks for that Chris, an arp -a does not return a beaglebone default IP of
> 192.168.6.2 on the LAN.
But is
Thanks for that Chris, an arp -a does not return a beaglebone default IP of
192.168.6.2 on the LAN.
I will look into the other device addresses on the network and hopefully
one of them is the BBB.
I also just thought of using the HDMI link on the board and connect to a
display and use
yassyass wrote:
> Hi guys,
>
> Not sure what's happened and not sure where to start troubleshooting.
>
> My BBB won't respond to SSH requests from Terminal on my mac, this was
> working perfectly fine just days ago and I am trying to go back and
> understand what