I had a board a few days ago that just stopped working as far as ssh went. So, I checked the LEDs on my GbE switch, and the lights were not lit. Checking further, I found that the LEDs on the beaglebone were also not lit.
So I disconnected the ethernet jack on both ends and reseated. Nothing. The ethernet did not start working again until I rebooted the board, by physically pressing the rest button on the board. I was curious if anyone else had experienced this same thing. This, for me has actually happened only once. The board this happened to was a Beaglebone green, running from the eMMC. Currently I'm running from sdcard but . . . william@beaglebone:~$ sudo mount /dev/mmcblk1p1 /media/rootfs/ william@beaglebone:~$ cd /media/rootfs/ william@beaglebone:/media/rootfs$ cat etc/dogtag BeagleBoard.org Debian Image 2016-06-19 william@beaglebone:/media/rootfs$ ls boot/ |grep init initrd.img-4.4.12-ti-r31 grepping through the various files in /var/log shows that everything was working fine as far as I can tell. No error messages that stand out for 'net' or 'eth0'. I've also talked with a person I know who has experienced this them self. Except for them, it has happened more than once, including with a 3.8.x kernel as well. As far as when this happened to me personally, The board was just idling for several days(5 - 6 days ) when I needed to get some information from the board, and not response via ssh. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/70650459-f315-4a57-bf23-92e8269246b7%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.