On Fri, Feb 23, 2018 at 11:40 AM, evilwulfie <evilwul...@gmail.com> wrote: > So far everything is working perfectly I can even get xwindows running > on this SPI display > So since it seems to be stable I would like to load the relevant modules > at boot > Searching the web everything is so old or targeted to the PI > > My command line to insert this module is > > modprobe -v fbtft_device busnum=1 cs=0 speed=32000000 name=er_tftm070_5 > gpios=reset:60,dc:24,led:50 > > i have tried many different things in /etc/modules without success > > best i can get is > > lsmod > > fb_ra8875 16384 0 > fbtft 45056 1 > fb_ra8875 > > > when loaded with modprobe i get > > fb_ra8875 16384 1 > fbtft 45056 2 > fb_ra8875,fbtft_device
setup a startup based off these notes: https://github.com/adafruit/adafruit-beaglebone-io-python/blob/master/test/notes/run_config-pin_during_startup.md But instead of doing: #!/bin/bash config-pin p9.17 i2c config-pin p9.18 i2c change that section to: #!/bin/bash modprobe -v fbtft_device busnum=1 cs=0 speed=32000000 name=er_tftm070_5 gpios=reset:60,dc:24,led:50 Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYhkFR6GObeTwMgAHQcr8Vwk4NFJsy%2BFCU9bqD36Pg%2BLgQ%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.