Yeah, I am only guessing that the power or cable is the issue, but it does
seem like it based on what I had seen in your dmesg output.
For upgrading the eMMC, I believe it would depend on how comfortable you
are running through the process. It would be much easier via an SD card,
but I did find
Thanks for letting me know the reasons, why its not working.
I've already ordered a 16 gb sd card to use the latest image using sd card
boot.
Anyway could please tell me how can i upgrade the emmc?
Thank you so much!
On Wed, Jul 15, 2020, 23:12 Jon Morss wrote:
> It is possible that you either
It is possible that you either have a bad USB cable or your PC can not
provide enough power to properly power up the BBB.
The preference would be to upgrade you eMMC, however, this message does
appear in your files though:
[ 8428.112630] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed:
Unplug and plug the BBB back in and then check the output of running the
command : dmesg
Jon
On Wed, Jul 15, 2020 at 8:25 AM Pankaj Rai wrote:
> Hi,
>
> It seems I'm not getting the 192.168.6.1 or 192.168.7.1 on command
> ifconfig -a
>
>
> Thanks
>
> On Wed, Jul 15, 2020, 20:19 amf wrote:
>
Only way to update the emmc os without a ethernet connection is by using a
USB-to-SERIAL adapter, make sure to get the 3.3 volt version.
Not sure if you answered the prior question. does your laptop show
192.168.6.1 and/or 192.168.7.1 when doing 'ifconfig -a' from a terminal
window?
If it
I believe Pankaj is using Ubuntu and not Windows.
Pankaj :
I would suggest checking that your Ubuntu system is creating a 192.168.7.1
ipaddress and is not having an issue connecting to the board via 'dmesg'.
Jon
On Tue, Jul 14, 2020 at 10:03 AM Dennis Lee Bieber <
dennis.l.bie...@gmail.com>
Hi,
Currently I'm working with my personal laptop only. And also i've ordered a
16 gb sd card for sure. But meanwhile i was trying to make it work with
with preinstalled os in eMMC only.
Is there any way we can update the eMMC OS? So that it may able to connect
to 192.168.7.2 or 192.168.6.2 (
connecting the ethernet to the computer will not provide you with an IP
address on the BBB. BBB wants to use dhcp to get an IP, which what happens
when connected to the router.
You should be able to ping 192.168.7.2 from the laptop, if you see
192.168.7.1 on the laptop.
Is this your personal
Hi,
Can we connect the BBB using ethernet cable to the computers ethernet port?
( It's because I'm living in hostel and here we have the hostel wifi
available)
And can we power the BBB using 5 V charger?
If not, then will it work out on using the flashed sd card as boot? (I'm
thinking to buy
I thought you were running Windows.
Can you ping 192.168.7.2 ?
It might show up as a virtual tty or USB port. Running Linux host I have
not done.
If your using Windows pull up device manager and look in com/lpt ports and
you
should see a new one something like USB Serial port COM4. That's what
So this is the original image that came with the BBB?
Like some one else just mentioned, you may want to use a ethernet cable
connected to your router.
Without knowing what image is on the BBB, it's going to be difficult to
trouble shoot this.
On Monday, July 13, 2020 at 12:14:00 PM UTC-5,
Hi,
I've enabled the port 22 on my pc and I'm not using sd card for flashing so
I don't think i need to press the s2 button.
And also i don't have any debugger and i tried pinging the BBB on that
address but it shows all the sent packets are lost so i think I'm unable to
ping.
Is there any other
What image are you running on the BBB?
Also, are you seeing an "192.168.7.1" ip created on your Ubuntu PC?
You can check this using:
* ifconfig -a*
You can check the 'dmesg' out on your PC to see if there are any errors
connecting to the BBB.
Jon
On Mon, Jul 13, 2020 at 10:13 AM Pankaj Rai
Your using Ubuntu 18.0.04 good, this is what I'm using also. Are you using
any firewall software, like ufw, if you are, make sure port 22 is allowed.
Yes, BBB comes with pre-install OS. If your BBB boots without and sdcard,
then it is booting form the emmc.
to boot from the sdcard, you have to
Hi,
Pc does play a sound while connecting BBB to pc. And I've not changed any
configuration of the BBB.
Thanks.
On Mon, Jul 13, 2020, 22:40 KenUnix wrote:
> If you have not modified it's configuration you should ssh to 196.168.7.2
>
> 192.168.7.1 is the P.C. side.of the connection.
>
> When
If you have not modified it's configuration you should ssh to 196.168.7.2
192.168.7.1 is the P.C. side.of the connection.
When powering the BBB up and connecting the USB cable does the PC play the
UP tone?
--
For more options, visit http://beagleboard.org/discuss
---
You received this
ssh: connect to host 192.168.7.1 port 22: Connection timed out
this is what i'm getting as error while connecting BBB to 192.68.7.2
what could be the reason and how can we resolve this issue.
thanks
Pankaj
On Sun, Jul 12, 2020 at 11:14 PM Pankaj Rai wrote:
> Hi amf,
> it's been a while since
Hi amf,
it's been a while since I've started using BBB. So, I dont know actually
how to get started with BBB.
I haven't installed any image on BBB on my own. I just followed the steps
mentioned in Readme of BBB. (I've attached the SS for your reference). Do
we need to install any image to BBB
18 matches
Mail list logo