#2 bump preference in other tables?
instead of using pipes
c) modify preference inside tables manually without using kernel tables?
ie with birdc?
Thank you in advance
Regards,
Andrew
a s***load of logs, yet it should yield enough clues to
isolate the problem and find a suitable solution.
Thank you for your report!
Maria
On September 24, 2021 3:13:45 PM UTC, Andrew wrote:
Hi all.
I have Bird 2.0.8 on one of border routers, it runs with kernel 5.10.26
and uClibc
Hi all.
I have Bird 2.0.8 on one of border routers, it runs with kernel 5.10.26
and uClibc-ng 1.0.38. It acts as RR and receives FV from uplink + FV
from second border (also RR), and it has 2 routing tables (one which
receives BGP routes, then routes sinks to main table.
When second
Cs.
We have full table on v4 and v6, and about 20 neighbors on each.
Our route/max_size for v4 and and v6 are defaults (2M and 4096
respectively) - and as noted, these values are the same in our Stretch
and Buster boxes.
Andrew
ion dies after some time
> and ssh connections in the default table freezes.
>
> I did some packet captures and saw tcp retransmissions before hold timer
> expires.
>
> Kernel 4.14.127 is here stable, too. Sadly I have no time for a kernel
> bisect until September. (And no glue where to start and how to trigger
> the bug faster.)
Sorry to bring up a fairly old thread...
We believe we are seeing this problem too, since a Stretch->Buster
upgrade - was there a solution to this?
Thanks
Andrew.
Hi all.
I have two default kernel routes with different metrics (for failover,
when first gateway becomes unreachable - all traffic is switched to
second gw). I want to pipe it to other kernel table to gracefully handle
connections to second IP. Unfortunatelly, I can't force bird to learn
Hi.
Try to assemble uClibc and bird with debug symbols, and try to analyze
core dump.
Also it'll be good to run bird (better- to use debug version) in
valgrind - it'll show all suspicious cases (like access across array
borders, use of uninitialized variables and so on).
On 24.10.2018
*From:*Bird-users [mailto:bird-users-boun...@network.cz] *On Behalf Of
*Andrew
*Sent:* Wednesday, December 13, 2017 4:30 PM
*To:* bird-users@network.cz
*Subject:* Re: BIRD Error
... or just to reload config using birdc shell...
On 13.12.2017 16:07, Damien Clabaut wrote:
Hello,
You can add
... or just to reload config using birdc shell...
On 13.12.2017 16:07, Damien Clabaut wrote:
Hello,
You can add the -d option to launch bird in the foreground with extra
debugging. Then you can just kill it with Ctrl + c.
Regards,
On 2017-12-13 08:57 AM, k.abda...@q-ab.com wrote:
Thank
achine. If someone guide us about the installation process of BIRD
> in ubuntu.. would be appreciated.
>
> Please mention the installation link, If you have..
>
> Help would be appreciated@@
>
>
> Thanks
> Pardeep
>
--
- Andrew "lathama" Latham -
nti...@crfreenet.org>
wrote:
> On Thu, Sep 21, 2017 at 11:08:47AM -0600, Derek Andrew wrote:
> > We are running BIRD and BIRD6 to manage our BFD and OSPF relationship on
> > our DNS servers.
> >
> > We moved the DNS servers onto a Fortigate firewall. I was able to get the
&
the MTU? The OSPF status is showing
the neighbour is in the Exchange state.
Thanks.
d
--
Copyright 2017 Derek Andrew (excluding quotations)
+1 306 966 4808
Communication and Network Services
Information and Communications Technology
Infrastructure Services
*University of Saskatchewan*Peterson 120
Hi.
You should configure R1 and R2 as route reflectors.
On 07.09.2017 14:17, Gelderman, Richard wrote:
I am trying to achieve a redundant routing setup with two routers with
the same ASN who do prefix delegation to a lower router.
The setup is the following:
AS1000 ISP1 ISP2 AS2000
On 04.07.2017 15:59, Ondrej Zajicek wrote:
On Sun, Jul 02, 2017 at 12:27:18PM +0300, Andrew wrote:
Hi all.
Today I saw strange bird hangup, which results in OSPF failure in areas
where router is. BIRD works as OSPF + BGP. All returns to work state after
bird was killed by SIGKILL and started
Maybe you forgot to disable rp_filter on uplink ifaces?
And prepend works for incoming traffic, for outgoing - there is
localpref. So, if outgoing traffic goes via ISP2 and incoming passed via
ISP1 - it's dropped if rp_filter is enabled.
On 25.04.2017 10:36, Wojciech Bajorek wrote:
Hi,
I
It'll be good to run bird under valgrind for testing - I catched some
bugs in 1.4.x in that way.
30.04.2016 14:08, Vladimir Lettiev пишет:
On Fri, Apr 29, 2016 at 06:35:33PM +0200, Ondrej Filip wrote:
Dear Bird users,
the long expected version is out:
Version 1.6.0 (2016-04-29)
o Major
Hi. I have BIRD route server + Quagga BGP peer to it. All works perfectly.
16.02.2016 00:00, Mike Santos Farias пишет:
How to establish BGP session between Bird and Quagga?
I have two virtual machines created on FreeBSD. With a route server
Quagga and another with Bird. But Bird did not
Hi all.
IMHO it'll be good to have 'aggregate' protocol (like 'pipe' one) for
route count decreasing in system routing table (which results in routing
performance increase)) and for using bird server as routing server for
hardware routers/L3 switches which usually have not too big TCAM.
Is
Hi.
Make 2 OSPF instances (don't forget to set different router ID); assign
them to different BIRD routing tables. How you'll sync BIRD routing
table with kernel one - you should specify via 'kernel' protocol.
23.07.2015 11:44, zeinab Farhadi пишет:
Hello,
My question is how do you execute
issue.
BGP is the protocol to use for such cases. Many routes, few messages,
scalability.
Le 14 juil. 2015 à 09:20, Andrew ni...@seti.kr.ua a écrit :
When routes are deleted (for ex., terminating a lot of PPP tunnels for some
reason in same time), it seems like each removed route is sent
16.06.2015 22:40, Ondrej Zajicek пишет:
On Tue, Jun 16, 2015 at 03:20:25PM +0300, Andrew wrote:
Thanks for the example, it is very descriptive. The problem here is that
'direct' protocol is a stateless translation of address announcements to
route announcements, but routing tables do
Hi all.
I'm testing bird 1.5.0 on PPPoE BRAS, and today noticed that sometimes
it looses routes. For ex., today it looses near 5 networks of 103 total
(before restart - it has 98 routes, after - 103)
Possibly this may be related with tunnel session hangup - when user
reconnects with same IP
Device proto is enabled? OSPF export/import filters?
26.01.2015 22:01, Andre Nathan пишет:
Hello
I'm trying to setup a simple lab test for OSPFv3 with bird.
The configuration is as follows:
eth1 eth0eth0 eth1
net 1---|router 1||router
27.12.2014 17:07, Alexander V. Chernikov пишет:
On 27 Dec 2014, at 04:50, Andrew ni...@seti.kr.ua wrote:
Hi all.
I tried to run multiple OSPF instances in BIRD for VRF, other clients - quagga
machines that listens both vlans and see each other.
BIRD sends packets from xx.xx.132.7 (which has
29.12.2014 18:30, Ondrej Zajicek пишет:
On Sat, Dec 27, 2014 at 03:50:07AM +0200, Andrew wrote:
Hi all.
I tried to run multiple OSPF instances in BIRD for VRF, other clients -
quagga machines that listens both vlans and see each other.
BIRD sends packets from xx.xx.132.7 (which has mask /32
18.12.2014 17:11, Ondrej Zajicek пишет:
On Thu, Dec 18, 2014 at 12:23:42PM +0200, Andrew wrote:
01.12.2014 13:16, Ondrej Zajicek пишет:
On Mon, Dec 01, 2014 at 03:17:22AM +0200, Andrew wrote:
Hi all.
I tried to run bird as BGP router (2x IX views, near 15K prefixes each) with
OSPF
26 matches
Mail list logo
