On Mon, Sep 28, 2015 at 12:31:09PM +0100, Israel G. Lugo wrote:
> I apologize for the delay in responding. I have tried the patch and it
> does fix the problem. Namely:
>
> Before the patch, starting Bird 1.5.0 with all interfaces LINK DOWN
> would leave the OSPF interfaces in Down state, from whi
Hello,
On 19-08-2015 10:20, Ondrej Zajicek wrote:
> On Tue, Aug 18, 2015 at 10:54:40AM +0200, Ondrej Zajicek wrote:
>> No, it is a bug, not behavior by design. Could you send me a log from the
>> start of BIRD (ideally two logs for both cases - one where interfaces end
>> in down state and one whe
On Mon, Aug 24, 2015 at 01:30:14PM +0100, Israel G. Lugo wrote:
> Hi,
>
> Sorry for the delay in responding. I was away on vacations.
>
> I will try the patch. Would you still like me to gather debug output
> first, with the current version?
Hi
If the patch works then it is unnecessary.
--
El
Hi,
Sorry for the delay in responding. I was away on vacations.
I will try the patch. Would you still like me to gather debug output
first, with the current version?
Regards,
--
Israel G. Lugo
Núcleo de Redes e Comunicações
Direção de Serviços de Informática
Instituto Superior Técnico
On 19-08
On Tue, Aug 18, 2015 at 10:54:40AM +0200, Ondrej Zajicek wrote:
> No, it is a bug, not behavior by design. Could you send me a log from the
> start of BIRD (ideally two logs for both cases - one where interfaces end
> in down state and one when BIRD crashes with 'in down state?' message)
> with ena
On Thu, Aug 13, 2015 at 08:23:44PM +0100, Israel G. Lugo wrote:
>
> On 13-08-2015 18:37, Ondrej Zajicek wrote:
> >
> > So these interfaces are UP but not LOWER_UP in 'ip addr list' output?
> >
>
> This is the situation when BIRD is launched, right after the network
> service finishes:
...
> I j
On 13-08-2015 18:37, Ondrej Zajicek wrote:
>
> So these interfaces are UP but not LOWER_UP in 'ip addr list' output?
>
This is the situation when BIRD is launched, right after the network
service finishes:
eth0: mtu 1500 qdisc mq state DOWN
mode DEFAULT qlen 1000
eth1: mtu 1500 qdisc mq sta
On Thu, Aug 13, 2015 at 06:29:27PM +0100, Israel G. Lugo wrote:
> Hello,
>
> I work with Bernardo.
>
> One piece of additional information: the problem seems to be caused by
> the interfaces being link down when BIRD comes up. They are already
> configured by the OS scripts, but they haven't fini
Hello,
I work with Bernardo.
One piece of additional information: the problem seems to be caused by
the interfaces being link down when BIRD comes up. They are already
configured by the OS scripts, but they haven't finished negotiating the
link yet (NO-CARRIER, state DOWN).
After a few seconds t
Sorry for the delay.
I include the output of the commands you asked as attachments.
Doing birdc restart ospf1 worked.
Às 09:26 PM de 07/27/2015, Ondrej Zajicek escreveu:
On Wed, Jul 22, 2015 at 05:50:09PM +0100, Bernardo Figueiredo wrote:
Hello,
When restarting some routers at the institutio
On Wed, Jul 22, 2015 at 05:50:09PM +0100, Bernardo Figueiredo wrote:
> Hello,
>
> When restarting some routers at the institution I work, sometimes bird
> doesn't start announcing any routes until we either restart bird or restart
> When this happens:
...
> "bird> show ospf
> (...)
>
Hello,
When restarting some routers at the institution I work, sometimes bird
doesn't start announcing any routes until we either restart bird or
restart the device protocol using birdc.
I think this happens due to the init scripts responsible for setting the
network up finishing before the in
12 matches
Mail list logo
