Re: [blfs-support] Not able to start the Xorg.
On Fri, Mar 28, 2014 at 01:08:56AM +1300, m...@pc-networking-services.com wrote: > > Hello, > > There is one more driver to try: > > Xorg Fbdev Driver-0.4.4 > > This one is meant to be if all else fails it should start the server > unless you have not installed ALL of the software excluding the other > drivers in the Xorg section. If you have left out any of the components > in that section, as David stated it will not work. > > If you could also attach a copy of the .config file from your kernel. > > Also an output of dmesg. For that do dmesg > test so that we can see the > full output of what is actually going on. > > Regards, > > Christopher. > I've got a slightly different request: Did X manage to create a log in /var/log ? If it did, what does it say ? ĸen -- das eine Mal als Tragödie, dieses Mal als Farce -- http://linuxfromscratch.org/mailman/listinfo/blfs-support FAQ: http://www.linuxfromscratch.org/blfs/faq.html Unsubscribe: See the above information page
Re: [blfs-support] Not able to start the Xorg.
>> Hello, >> >> Make sure that you have installed: >> Xorg Nouveau Driver-1.0.10 >> Xorg ATI Driver-7.3.0 >> MesaLib-10.0.3 >> >> Mesalib is required for compiling the driver for your graphics chip set. >> >> When compiling Mesa be sure that you do not remove anything from the >> configure line that is shown on the instruction page as they are needed >> to >> compile your driver. >> >> Mesa will need to be compiled first (if its not already installed). >> >> By having both of the AMD chip set drivers installed your computer has >> more chance of being able to switch properly to the graphics mode as it >> has a fall back. >> >> Also it may well pay to install Xorg VESA Driver-2.3.3 as this one will >> be >> used if both of the others fail. >> >> Regards, >> >> Christopher > > > Hi Christopher, > i have installed both of these > Xorg ATI Driver-7.3.0 > MesaLib-10.0.3 > but not > Xorg Nouveau Driver-1.0.10 since it belongs to NVidia Cards and > i have Radeon card. > and i have also tried of using Xorg VESA Driver-2.3.3 but still i am not > able to start the Xorg. > hope some one can help me out. > but thanks for your reply -- > http://linuxfromscratch.org/mailman/listinfo/blfs-support > FAQ: http://www.linuxfromscratch.org/blfs/faq.html > Unsubscribe: See the above information page Hello, There is one more driver to try: Xorg Fbdev Driver-0.4.4 This one is meant to be if all else fails it should start the server unless you have not installed ALL of the software excluding the other drivers in the Xorg section. If you have left out any of the components in that section, as David stated it will not work. If you could also attach a copy of the .config file from your kernel. Also an output of dmesg. For that do dmesg > test so that we can see the full output of what is actually going on. Regards, Christopher. -- http://linuxfromscratch.org/mailman/listinfo/blfs-support FAQ: http://www.linuxfromscratch.org/blfs/faq.html Unsubscribe: See the above information page
Re: [blfs-support] Not able to start the Xorg.
> Hello, > > Make sure that you have installed: > Xorg Nouveau Driver-1.0.10 > Xorg ATI Driver-7.3.0 > MesaLib-10.0.3 > > Mesalib is required for compiling the driver for your graphics chip set. > > When compiling Mesa be sure that you do not remove anything from the > configure line that is shown on the instruction page as they are needed to > compile your driver. > > Mesa will need to be compiled first (if its not already installed). > > By having both of the AMD chip set drivers installed your computer has > more chance of being able to switch properly to the graphics mode as it > has a fall back. > > Also it may well pay to install Xorg VESA Driver-2.3.3 as this one will be > used if both of the others fail. > > Regards, > > Christopher Hi Christopher, i have installed both of these > Xorg ATI Driver-7.3.0 > MesaLib-10.0.3 but not > Xorg Nouveau Driver-1.0.10 since it belongs to NVidia Cards and i have Radeon card. and i have also tried of using Xorg VESA Driver-2.3.3 but still i am not able to start the Xorg. hope some one can help me out. but thanks for your reply -- http://linuxfromscratch.org/mailman/listinfo/blfs-support FAQ: http://www.linuxfromscratch.org/blfs/faq.html Unsubscribe: See the above information page
Re: [blfs-support] Not able to start the Xorg.
Hi.
I think that some of the basic X dependency packages are not present
in your system what is making Xorg not able to start even in the most
"primitive" configuration.
Could you please write us if you followed the X related part of BLFS
book step by step?
In theory maybe if you could please list /usr/include/X11/,
/usr/lib{,32,64}/X11, /usr/lib{,32,64}/xorg, /usr/lib{,32,64}/libx*
and /usr/lib{,32,64}/libX* folders and files it would be great.
Best regards, David.
2014-03-27 2:39 GMT+01:00 :
>>
>>
>>
>> Hi David,
>>>Only one udevd can operate at the same time. No need to do anythingwith
>>> udev. (You can use eudev too, scripts around udev do the logic,udev the
>>> work.)
>> ok i will not install the Udev given in the BLFS.
>>>Please do install pciutils so we can see type of your VGA hardware.
>> i have installed and the output of (/usr/sbin) lspci -v | grep VGA is
>> 00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI]
>> Trinity [Radeon HD 7640G] (prog-if 00 [VGA controller])01:00.0 VGA
>> compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Thames
>> [Radeon HD 7500M/7600M Series] (prog-if 00 [VGA controller])
>>>For fglrx you should configure Xorg using vendor tool packed withdriver
>>> package - fglrxconfig.For modern AMD driver it is called aticonfig.
>> I used both the command "fglrxconfig" & "aticonfig" but it returned "bash
>> command not found"
>>
>>> If it is laptop with two graphics cards you maybe will need PRIME
>>> orBumblebee for switching it if it is not selectable in BIOS/UEFI.
>> yes It is a laptop with dual graphics and it is proved by the lspci
>> command above.
>> And originally i din't installed the vesafb i just enabled it while kernel
>> configuration.
>>
>>> Is kernel module for your card loaded? (lsmod) Does the modulerecognize
>>> your card? (check your system log messages fileor rmmod module &&
>>> modprobe module and post output of modprobe commandfrom
>>> terminal/konsole.)
>>>Did you identified the module for your VGA and tried that removal/insert?
>> I think so it has been loaded. And secondly i don't know about which
>> module to select can you please help and name them so that i can perform
>> the operation and send you the log of it.
>>
>> in last i have some attachments.1. lsmod output after installation on
>> Pciutils.2.output of command Xorg -configure 1> a.log 2> w.log3.I also
>> performed Xorg -config xorg.conf.d -retro( but it is just getting stuck at
>> the last line as given in the file, i am able to enter words but it does
>> not respond to it.)
>> (and i would also like to mention that their is no files in xorg.conf.d)
>>
>> --
>> http://linuxfromscratch.org/mailman/listinfo/blfs-support
>> FAQ: http://www.linuxfromscratch.org/blfs/faq.html
>> Unsubscribe: See the above information page
>
> Hello,
>
> Make sure that you have installed:
> Xorg Nouveau Driver-1.0.10
> Xorg ATI Driver-7.3.0
> MesaLib-10.0.3
>
> Mesalib is required for compiling the driver for your graphics chip set.
>
> When compiling Mesa be sure that you do not remove anything from the
> configure line that is shown on the instruction page as they are needed to
> compile your driver.
>
> Mesa will need to be compiled first (if its not already installed).
>
> By having both of the AMD chip set drivers installed your computer has
> more chance of being able to switch properly to the graphics mode as it
> has a fall back.
>
> Also it may well pay to install Xorg VESA Driver-2.3.3 as this one will be
> used if both of the others fail.
>
> Regards,
>
> Christopher
>
> --
> http://linuxfromscratch.org/mailman/listinfo/blfs-support
> FAQ: http://www.linuxfromscratch.org/blfs/faq.html
> Unsubscribe: See the above information page
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above information page
Re: [blfs-support] Not able to start the Xorg.
> > > > Hi David, >>Only one udevd can operate at the same time. No need to do anythingwith >> udev. (You can use eudev too, scripts around udev do the logic,udev the >> work.) > ok i will not install the Udev given in the BLFS. >>Please do install pciutils so we can see type of your VGA hardware. > i have installed and the output of (/usr/sbin) lspci -v | grep VGA is > 00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] > Trinity [Radeon HD 7640G] (prog-if 00 [VGA controller])01:00.0 VGA > compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Thames > [Radeon HD 7500M/7600M Series] (prog-if 00 [VGA controller]) >>For fglrx you should configure Xorg using vendor tool packed withdriver >> package - fglrxconfig.For modern AMD driver it is called aticonfig. > I used both the command "fglrxconfig" & "aticonfig" but it returned "bash > command not found" > >> If it is laptop with two graphics cards you maybe will need PRIME >> orBumblebee for switching it if it is not selectable in BIOS/UEFI. > yes It is a laptop with dual graphics and it is proved by the lspci > command above. > And originally i din't installed the vesafb i just enabled it while kernel > configuration. > >> Is kernel module for your card loaded? (lsmod) Does the modulerecognize >> your card? (check your system log messages fileor rmmod module && >> modprobe module and post output of modprobe commandfrom >> terminal/konsole.) >>Did you identified the module for your VGA and tried that removal/insert? > I think so it has been loaded. And secondly i don't know about which > module to select can you please help and name them so that i can perform > the operation and send you the log of it. > > in last i have some attachments.1. lsmod output after installation on > Pciutils.2.output of command Xorg -configure 1> a.log 2> w.log3.I also > performed Xorg -config xorg.conf.d -retro( but it is just getting stuck at > the last line as given in the file, i am able to enter words but it does > not respond to it.) > (and i would also like to mention that their is no files in xorg.conf.d) > > -- > http://linuxfromscratch.org/mailman/listinfo/blfs-support > FAQ: http://www.linuxfromscratch.org/blfs/faq.html > Unsubscribe: See the above information page Hello, Make sure that you have installed: Xorg Nouveau Driver-1.0.10 Xorg ATI Driver-7.3.0 MesaLib-10.0.3 Mesalib is required for compiling the driver for your graphics chip set. When compiling Mesa be sure that you do not remove anything from the configure line that is shown on the instruction page as they are needed to compile your driver. Mesa will need to be compiled first (if its not already installed). By having both of the AMD chip set drivers installed your computer has more chance of being able to switch properly to the graphics mode as it has a fall back. Also it may well pay to install Xorg VESA Driver-2.3.3 as this one will be used if both of the others fail. Regards, Christopher -- http://linuxfromscratch.org/mailman/listinfo/blfs-support FAQ: http://www.linuxfromscratch.org/blfs/faq.html Unsubscribe: See the above information page
Re: [blfs-support] Not able to start the Xorg.
Hi David, >Only one udevd can operate at the same time. No need to do anythingwith udev. >(You can use eudev too, scripts around udev do the logic,udev the work.) ok i will not install the Udev given in the BLFS. >Please do install pciutils so we can see type of your VGA hardware. i have installed and the output of (/usr/sbin) lspci -v | grep VGA is 00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Trinity [Radeon HD 7640G] (prog-if 00 [VGA controller])01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Thames [Radeon HD 7500M/7600M Series] (prog-if 00 [VGA controller]) >For fglrx you should configure Xorg using vendor tool packed withdriver >package - fglrxconfig.For modern AMD driver it is called aticonfig. I used both the command "fglrxconfig" & "aticonfig" but it returned "bash command not found" > If it is laptop with two graphics cards you maybe will need PRIME orBumblebee > for switching it if it is not selectable in BIOS/UEFI. yes It is a laptop with dual graphics and it is proved by the lspci command above. And originally i din't installed the vesafb i just enabled it while kernel configuration. > Is kernel module for your card loaded? (lsmod) Does the modulerecognize your > card? (check your system log messages fileor rmmod module && modprobe module > and post output of modprobe commandfrom terminal/konsole.) >Did you identified the module for your VGA and tried that removal/insert? I think so it has been loaded. And secondly i don't know about which module to select can you please help and name them so that i can perform the operation and send you the log of it. in last i have some attachments.1. lsmod output after installation on Pciutils.2.output of command Xorg -configure 1> a.log 2> w.log3.I also performed Xorg -config xorg.conf.d -retro( but it is just getting stuck at the last line as given in the file, i am able to enter words but it does not respond to it.) (and i would also like to mention that their is no files in xorg.conf.d) Module Size Used by vmnet 50395 13 dm_crypt 22357 0 vsock 47477 0 vmci 76222 1 vsock vmmon 69967 0 parport_pc 27504 0 ppdev 12817 0 rfcomm 37420 12 bnep 17736 2 binfmt_misc17260 1 joydev 17097 0 xt_hl 12465 6 ip6t_rt12473 3 nf_conntrack_ipv6 13871 7 nf_defrag_ipv6 13025 1 nf_conntrack_ipv6 ip6t_REJECT12533 3 xt_LOG 17192 10 ideapad_laptop 18018 0 sparse_keymap 13658 1 ideapad_laptop xt_limit 12541 13 xt_tcpudp 12531 18 xt_addrtype12563 4 snd_hda_codec_realtek63829 1 arc4 12543 2 ath9k 135113 0 snd_hda_codec_hdmi 36143 1 ath9k_common 13783 1 ath9k snd_hda_intel 38307 5 ath9k_hw 398477 2 ath9k_common,ath9k snd_hda_codec 117617 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel nf_conntrack_ipv4 14071 7 nf_defrag_ipv4 12649 1 nf_conntrack_ipv4 snd_hwdep 13272 1 snd_hda_codec xt_state 12514 14 snd_pcm80890 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel snd_page_alloc 14230 2 snd_pcm,snd_hda_intel snd_seq_midi 13132 0 snd_seq_midi_event 14475 1 snd_seq_midi ath19187 3 ath9k_common,ath9k,ath9k_hw snd_rawmidi25114 1 snd_seq_midi ath3k 12790 0 mac80211 526619 1 ath9k snd_seq51280 2 snd_seq_midi_event,snd_seq_midi snd_seq_device 14137 3 snd_seq,snd_rawmidi,snd_seq_midi btusb 17986 0 snd_timer 24411 2 snd_pcm,snd_seq uvcvideo 71279 0 ipt_REJECT 12485 3 videobuf2_vmalloc 12920 1 uvcvideo kvm_amd50336 0 videobuf2_memops 13042 1 videobuf2_vmalloc ip6table_filter12711 1 videobuf2_core 39161 1 uvcvideo ip6_tables 17819 1 ip6table_filter nf_conntrack_netbios_ns12585 0 nf_conntrack_broadcast12541 1 nf_conntrack_netbios_ns rts5139 277682 0 nf_nat_ftp 12548 0 nf_nat 20857 1 nf_nat_ftp videodev 95806 2 uvcvideo,videobuf2_core nf_conntrack_ftp 13118 1 nf_nat_ftp mac_hid13037 0 nf_conntrack 67003 8 nf_nat_ftp,nf_conntrack_netbios_ns,nf_nat,xt_state,nf_conntrack_broadcast,nf_conntrack_ftp,nf_conntrack_ipv4,nf_conntrack_ipv6 kvm 376584 1 kvm_amd iptable_filter 12706 1 cfg80211 440887 3 ath,ath9k,mac80211 k10temp12958 0 i2c_piix4 13066
Re: [blfs-support] Not able to start the Xorg.
Hi. Only one udevd can operate at the same time. No need to do anything with udev. (You can use eudev too, scripts around udev do the logic, udev the work.) Please do install pciutils so we can see type of your VGA hardware. I do not see anything attached. My log written by xorg is around 40 KiB. Did you identified the module for your VGA and tried that removal/insert? What will Xorg say if called this way?: Xorg -configure Regards, David. 2014-03-25 18:51 GMT+01:00 Prasad Kumbhar : > Thanks David for replying & I am very sorry for replying so late. > > In reply to your mail > >> Do you have pciutils installed? Please run (/usr/sbin/)lspci -v |grep >> VGA and post the result here. > > I have not installed pciutils till now. Is that important to install before > running XORG? > > >> Is kernel module for your card loaded? (lsmod) > > Output of the lsmod is in the attachments kindly have a look. > > >> Your log files look way too short. > > whom ever i have showed my log they also have said this only but I don't > know any thing about it. > >> Do you have needed configuration in kernel? >> Is udev running properly? > > I have installed the UDEV from LFS book but not from the BLFS book. Should I > install UDEV from BLFS book also. > > > PLEASE HELP! > > -- > http://linuxfromscratch.org/mailman/listinfo/blfs-support > FAQ: http://www.linuxfromscratch.org/blfs/faq.html > Unsubscribe: See the above information page -- http://linuxfromscratch.org/mailman/listinfo/blfs-support FAQ: http://www.linuxfromscratch.org/blfs/faq.html Unsubscribe: See the above information page
Re: [blfs-support] Not able to start the Xorg.
Thanks David for replying & I am very sorry for replying so late. In reply to your mail > Do you have pciutils installed? Please run (/usr/sbin/)lspci -v |grep > VGA and post the result here. I have not installed pciutils till now. Is that important to install before running XORG? > Is kernel module for your card loaded? (lsmod) Output of the lsmod is in the attachments kindly have a look. > Your log files look way too short. whom ever i have showed my log they also have said this only but I don't know any thing about it. > Do you have needed configuration in kernel?> Is udev running properly? I have installed the UDEV from LFS book but not from the BLFS book. Should I install UDEV from BLFS book also. PLEASE HELP! -- http://linuxfromscratch.org/mailman/listinfo/blfs-support FAQ: http://www.linuxfromscratch.org/blfs/faq.html Unsubscribe: See the above information page
Re: [blfs-support] Not able to start the Xorg.
Hi, Do you have pciutils installed? Please run (/usr/sbin/)lspci -v |grep VGA and post the result here. Is kernel module for your card loaded? (lsmod) Does the module recognize your card? (check your system log messages file or rmmod module && modprobe module and post output of modprobe command from terminal/konsole.) Modern Xorg server is able to detect best settings for your card under normal circumstances, no xorg.conf file should be needed. Your log files look way too short. Do you have needed configuration in kernel? Is udev running properly? Regards, David. 2014-03-23 13:53 GMT+01:00 Prasad Kumbhar : > I am right now in Xorg-7.7 Testing and Configuration. And as the book i run > the "startx" but i am not getting the desired output as mentioned in book of > getting 3/4 windows. In-fact it is showing me the description of my system > and then for some time their is no output and suddenly it says about bad > display. and then it exits. > I am not able to figure what is wrong in it. > > Earlier i created the xorg.conf file but, when i run the "startx" it used to > give some error in finding the display then i deleted the conf file. I am > attaching the output which i got while i executed "startx" when i had > xorg.conf file. And their was only one Xorg.0.log file. > > But after deleting the xorg.conf file, their are no errors for finding the > display, now it just say bad display. And now i am getting 4 Xorg.*.log > files(which can be found in attachments below) when i am running the > "startx". In last I am attaching the output which i got while i executed > "startx". > > attachments: > 1. output of "startx" with xorg.conf. > 2. Xorg.0.log. > 3. Xorg.1.log. > 4. Xorg.2.log. > 5. Xorg.3.log. > 6. output of "startx" without xorg.conf. > > -- > http://linuxfromscratch.org/mailman/listinfo/blfs-support > FAQ: http://www.linuxfromscratch.org/blfs/faq.html > Unsubscribe: See the above information page -- http://linuxfromscratch.org/mailman/listinfo/blfs-support FAQ: http://www.linuxfromscratch.org/blfs/faq.html Unsubscribe: See the above information page
