This is great info, but has anyone who is totally blind found a way
to solder pipe? I can't imagine how that could be done considering
the heat source.
Scott
[EMAIL PROTECTED]
To listen to the show archives go to link
http://acbradio.org/handyman.html
or
you can get a light probe that vibrates when the light sauce is detected from
the rnib in london.
joe.
- Original Message -
From: Boyce, Ray
To: blindhandyman@yahoogroups.com
Sent: Wednesday, January 17, 2007 8:35 PM
Subject: [BlindHandyMan] Light Probes Available Here.
I see absolutely no mention of compression connectors in this article --
compression connectors would be much more feasible for a totally blind
handyman to use than attempting to sweat solder.
Bill Gallik
E-Mail: [EMAIL PROTECTED]
- An idealist is a person who helps other people
to add to Bill's comment about compression fittings being more blind
friendly, these new SharkBite connectors sound really nice as well.
Push to connect and they can be released as well.
--
Blue skies.
Dan Rossi
Carnegie Mellon University.
E-Mail: [EMAIL PROTECTED]
Tel:(412) 268-9081
To
Hello, Does anyone have a mini belt sander?
If so what are your comments about it?
I checked with Sears, Home Depot and Lowes' and they do not carry any.
Harbor Freight is about 40 miles away. In the past I was not greatly impressed
with them but this will not be a hard used tool.
Harbor Freight
Please remove me from getting these messages.
- Original Message -
From: Joe Hunter
To: blindhandyman@yahoogroups.com
Sent: Thursday, January 18, 2007 9:08 AM
Subject: Re: [BlindHandyMan] Light Probes Available Here.
you can get a light probe that vibrates when the light
I guess I didn't tell the list,
Sad to tell you all that Dr. Tom BEnham passed away last april.
I believe his wife, Lee, is still running the company with family.
We will all miss his stories and his ability to create and get made stuff
nobody else would or could do.
I hope Lee will put
ron,
Can one tell the difference between black iron and galvanized steel by touch?
or any other non-visual method?
thanks
Tom
To listen to the show archives go to link
http://acbradio.org/handyman.html
or
ftp://ftp.acbradio.org/acbradio-archives/handyman/
The Pod Cast address for the Blind
Very good question. I am not sure I have an answer. Many tiems galvanized is
rougher inside or out, but I have also saw some really smooth. If one is
buying I guess you will be depending on the clerk or whoever might be with you.
In your existing house you are about limited to following
Hi All
Plastic-Composite
One alternative, plastic-composite trim, is manufactured from a
combination of recycled wood fiber and plastic. A variety of plastics
can be used, such
as high-density polyethylene, polyvinyl chloride (PVC) and styrene. The
use of wood fiber reduces the cost of the
Hi
Hammer drills are the most popular homeowner products for light-duty
masonry work and occasional concrete work.
Hammer Drills
These days hammer drills are available in both the corded and the more
convenient cordless models. Some are dedicated hammer drills; some are
rotary drill/drivers
with
Hi All
Twist Drill Bits
Twist drill bits are some of the most common shop tools. They're
available in a wide range of sizes, point and twist shapes, and these
days they're not
only available in standard industrial-grade steel, but also in exotic
materials including titanium coated, black oxide
I haven't used one but I have seen several including some pretty big narrow
belt machines. I don't have any idea what I would use it for. I don't do
scroll sawing, hard to do when you can't see. I always assumed they were
more useful for metal working but apparently not.
Dale Leavens,
Dan
What are sharkbite connectors and how do they differ from compression
fittings?
Al
-Original Message-
From: blindhandyman@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Dan Rossi
Sent: Thursday, January 18, 2007 12:00 PM
To: blindhandyman@yahoogroups.com
Subject: Re:
Hi
13 Pro Tips for Crown Molding and Trim
1. Make sure that each length of crown molding you purchase has the exact same
spring angle, width and thickness. Why? Building supply stores purchase their
crown (and trim) from several manufactures, each using their on different
fabrication
I have been soldering copper pipe since my first installation in 1975 when I
set up hot and cold water for a washing machine. Fire, when working near
joists and often other confined areas is a concern and care must be taken
and it is possible to burn oneself but I have never burned myself
Hi
A Good Look at Greenhouses
A greenhouse means the gardening season doesn't have to end with the onset of
winter. It provides a light-friendly location for growing flowers, vegetables
or other plants. Enjoy plump, juicy tomatoes in winter and decorate your home
with tropical flowers
BlankI am trying to install a new door bell chime. It is a basic wired
door chime which I am replacing the old one. There is a front door bell and
a back door bell and there is three wires to connect to the chime and I have
tried to connect the wires up and after trying lots of different
It occurs to me that this subject at least in my memory hasn't come up on
here as of yet so I'm putting it out for discussion. Does anybody have
instructions for hooking up a generator? If so please share them with the
group.
David Ferrin
I believe that tomorrow is another day, and I'll
that's a 38mph scooter.
the only reason I'd like a palm sander more than a belt is for that
flat that really lets me get into 3 sided corners.. Take a look at it, if
it's
little snout seems like it would get you into places... then for that
money, why not?
On Thu, 18 Jan 2007, Lenny McHugh
The best tool for cutting synthetic rope is a hot soldering iron. If you
don't force it and let it melt through at its own speed it will fuse the
strands together and make a nice clean cut.
Regards.
Max. K 4 O D S.
Email: [EMAIL PROTECTED]
Transistor site http://www.funwithtransistors.net
Max, that may be so but there is a bit of Tim the tool man in me!
The ropes I made for guiding lawn mowing operations are approaching an inch
thick, I don't think I would live long enough to cut through them with a
soldering gun. I cut them with a hack saw then torched the ends, well most
of
I would think that it depends on what you're wiring up. Wiring up a house
for a generator and wiring up, say, a trailer are different procedures, from
what I understand. And I also think it varies from wiring to wiring scheme.
I've never done it, electricity kinda makes me nervous, so I'm just
23 matches
Mail list logo