Did you try an edit the TCP/IP gateway in the GUI and get the internal
server error?
That's what started it.
I did a CLI reboot after that.
- Ernie.
> Hi Ernie,
>
> > admserv-php-fpm doesn't start on boot up, it does start manually.
>
> I am unable to replicate this. Regardless if I install
Morning All,
As with Ernie
admserv-php-fpm started over night on the admin panel and I can now access
the admin panel was then able to finish the setup of the srever
so I figured I would try the easy-migrate now and see if that works
--check was ok
--config worked
--dnsonly worked
Go to do
Ernie,
.
Believe on the newer servers (at least on 5210R)
the /var/run is a symbolic link to /run
--
Larry Smith
lesm...@ecsis.net
On Sat November 26 2022 07:03, Ernie wrote:
> Here is a good one from the /var/log/php-fpm/error.log
>
> 26-Nov-2022 20:10:58 ERROR: Unable to create the PID file
Hi all, I did a 5211 VM and had an issue connecting to setup via the web
interface for the initial and password etc, but I had to restart after I did
the initial cli with host name, up, gateway etc... Maybe not all services were
starting as I could not ping it nor resolve an address from it but
Here is a good one from the /var/log/php-fpm/error.log
26-Nov-2022 20:10:58 ERROR: Unable to create the PID file
(/run/php-fpm/php-fpm.pid).: No such file or directory (2)
Which is correct, it's supposed to be /var/run not /run.
I wonder if that's related to the admserv-php-fpm not starting on
Ignore that,
there was a symlink in /var I missed.
-Ernie.
> Here is a good one from the /var/log/php-fpm/error.log
>
> 26-Nov-2022 20:10:58 ERROR: Unable to create the PID file
> (/run/php-fpm/php-fpm.pid).: No such file or directory (2)
>
> Which is correct, it's supposed to be /var/run