Issue #2815 has been updated by swildner. Target version deleted (4.0.x)
We updated our 802.11 stack and drivers in master and this issue seems to no longer occur. May 26 22:51:34 <kern.crit> zoot kernel: ral1: <Ralink Technology RT2790> [attached!] mem 0xfebf0000-0xfebfffff irq 19,19 at device 0.0 on pci6 I've not tested it further yet, but if you still have the box, please test too. ---------------------------------------- Bug #2815: Ralink wireless card fails on boot - ral0: timeout waiting for NIC to initialize http://bugs.dragonflybsd.org/issues/2815#change-12885 * Author: sjb.00.01 * Status: New * Priority: Normal * Assignee: * Category: * Target version: ---------------------------------------- Using Dragonfly 4.0.5 release with X86_64_GENERIC kernel, Ralink based wireless card (Linksys WMP600n-pci) fails to initialize. Error received is "ral0: timeout waiting for NIC to initialize" followed by "device_probe_and_attach: ral0 attach returned 5". This same card works without issue on both FreeBSD and OpenBSD. dmesg follows: Copyright (c) 2003-2014 The DragonFly Project. Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. MPTABLE: warning duplicated PCI int entry for bus 0, dev 29, pin 0 MPTABLE: warning duplicated PCI int entry for bus 0, dev 31, pin 1 DragonFly v4.0.5-RELEASE #29: Sun Mar 22 17:42:50 PDT 2015 r...@pkgbox64.dragonflybsd.org:/usr/obj/build/home/justin/src/sys/X86_64_GENERIC TSC clock: 2667414070 Hz, i8254 clock: 1193177 Hz CPU: Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz (2667.44-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> Thermal and PM Features=0x1<SENSOR> MONITOR/MWAIT Features=0x3<CST,INTBRK> real memory = 3748130816 (3574 MB) avail memory = 3513544704 (3350 MB) lapic: divisor index 0, frequency 133371479 Hz Initialize MI interrupts VMM: PROCBASED_ACTIVATE_SECONDARY_CONTROLS not supported by this CPU FQ scheduler policy version 1.1 loaded wdog: In-kernel automatic watchdog reset enabled kbd1 at kbdmux0 disk scheduler: set policy of vn0 to noop disk scheduler: set policy of vn1 to noop disk scheduler: set policy of vn2 to noop disk scheduler: set policy of vn3 to noop disk scheduler: set policy of md0 to noop md0: Malloc disk cryptosoft0: <software crypto> on motherboard aesni0: No AESNI support. padlock0: No ACE support. rdrand0: No RdRand support. pcib0: <MPTABLE Host-PCI bridge> pcibus 0 on motherboard pci0: <PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0xff00-0xff07 mem 0xfdf80000-0xfdfbffff,0xe0000000-0xefffffff,0xfdf00000-0xfdf7ffff irq 16 at device 2.0 on pci0 agp0: <Intel 82945G (945G GMCH) SVGA controller> on vgapci0 agp0: aperture size is 256M, detected 7932k stolen memory vgapci0: Boot video device pci0: <multimedia, HDA> (vendor 0x8086, dev 0x27d8) at device 27.0 irq 16 uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xfe00-0xfe1f irq 23 at device 29.0 on pci0 usbus0: <Intel 82801G (ICH7) USB controller USB-A> on uhci0 uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xfd00-0xfd1f irq 19 at device 29.1 on pci0 usbus0: 12Mbps Full Speed USB v1.0 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 usbus1: <Intel 82801G (ICH7) USB controller USB-B> on uhci1 uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xfc00-0xfc1f irq 18 at device 29.2 on pci0 usbus1: 12Mbps Full Speed USB v1.0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 usbus2: <Intel 82801G (ICH7) USB controller USB-C> on uhci2 uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xfb00-0xfb1f irq 16 at device 29.3 on pci0 usbus2: 12Mbps Full Speed USB v1.0 ugen2.1: <Intel> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 usbus3: <Intel 82801G (ICH7) USB controller USB-D> on uhci3 pci0: <serial bus, USB> (vendor 0x8086, dev 0x27cc) at device 29.7 irq 23 pcib1: <MPTABLE PCI-PCI bridge> at device 30.0 on pci0 pci1: <PCI bus> on pcib1 ral0: <Ralink Technology RT2860> mem 0xfdef0000-0xfdefffff irq 19 at device 3.0 on pci1 ral0: timeout waiting for NIC to initialize device_probe_and_attach: ral0 attach returned 5 pci1: <simple comms> (vendor 0x14f1, dev 0x2f20) at device 4.0 irq 16 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH7 UDMA100 controller> port 0xfa00-0xfa0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 usbus3: 12Mbps Full Speed USB v1.0 uhub0: 2 ports with 2 removable, self powered ad0: DMA limited to UDMA33, controller found non-ATA66 cable disk scheduler: set policy of ad0 to noop ugen3.1: <Intel> at usbus3 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ad0: 19092MB <Seagate ST320413A 3.39> at ata0-master UDMA33 ata1: <ATA channel 1> on atapci0 ahci0: <AHCI-PCI-SATA> port 0xf500-0xf50f,0xf600-0xf603,0xf700-0xf707,0xf800-0xf803,0xf900-0xf907 mem 0xfdffe000-0xfdffe3ff irq 19 at device 31.2 on pci0 uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered ugen3.2: <Generic> at usbus3 umass0: <Bulk-In, Bulk-Out, Interface> on usbus3 ahci0: AHCI 1.1 cap 0xd3201f03<S64A,NCQ,SMPS,SAL,SCLO>, 4 ports, 32 tags/port, gen 2 (3Gbps) ahci0.0: Caps 2006<MPSS,POD,SUD> ahci0.1: Caps 2006<MPSS,POD,SUD> ahci0.2: Caps 2006<MPSS,POD,SUD> ugen2.2: <HP> at usbus2 umass1: <HP v165w, class 0/0, rev 2.00/16.38, addr 2> on usbus2 ugen3.3: <Logitech> at usbus3 ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/24.00, addr 3> on usbus3 kbd2 at ukbd0 ums0: <Logitech USB Receiver, class 0/0, rev 2.00/24.00, addr 3> on usbus3 ums0: 16 buttons and [XYZT] coordinates ID=2 uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/24.00, addr 3> on usbus3 ahci0.3: Caps 2006<MPSS,POD,SUD> ahci0.0: Found DISK "ST3320820AS 3.AHG" serial="9QF1B7SA" ahci0.0: tags=32/32 satacap=0506 satacap2=0000 satafea=0048 NCQ=YES capacity=305245.33MB ahci0.0: f85=3069 f86=3c01 f87=4023 WC=enabled RA=enabled SEC=notsupp ahci0.1: Found ATAPI "HL-DT-STDVDRRW GSA-H30L S655" serial="" ahci0.1: tags=0/32 satacap=0002 satacap2=0000 satafea=0040 NCQ=NO capacity=1.00MB ahci0.1: f85=0000 f86=0000 f87=0000 WC=notsupp RA=notsupp SEC=notsupp ahci0.2: No device detected ahci0.3: Found DISK "Hitachi HTS725050A9A364 PC4OC70E" serial="110510PCK404GLHKLMBJ" ahci0.3: tags=32/32 satacap=1706 satacap2=0000 satafea=005e NCQ=YES capacity=476940.02MB ahci0.3: f85=7469 f86=be49 f87=6163 WC=enabled RA=enabled SEC=frozen pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x27da) at device 31.3 irq 19 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: can't drain, serial port might not exist, disabling sio1: can't drain, serial port might not exist, disabling ppc0: cannot reserve I/O port range hpt27xx: no controller detected. CAM: Configuring 8 busses CAM: finished configuring all busses disk scheduler: set policy of da8 to noop disk scheduler: set policy of da9 to noop disk scheduler: set policy of da10 to noop disk scheduler: set policy of da11 to noop disk scheduler: set policy of da12 to noop disk scheduler: set policy of da0 to noop disk scheduler: set policy of da1 to noop disk scheduler: set policy of cd0 to noop da0 at ahci0 bus 0 target 0 lun 0 da0: <SATA ST3320820AS 3.AH> Fixed Direct Access SCSI-4 device da0: Serial Number 9QF1B7SA da0: 300.000MB/s transfers da0: 305245MB (625142448 512 byte sectors: 255H 63S/T 38913C) da1 at ahci0 bus 3 target 0 lun 0 da1: <SATA Hitachi HTS72505 PC4O> Fixed Direct Access SCSI-4 device da1: Serial Number 110510PCK404GLHKLMBJ da1: 300.000MB/s transfers da1: 476940MB (976773168 512 byte sectors: 255H 63S/T 60801C) da12 at umass-sim1 bus 1 target 0 lun 0 da12: <hp v165w 1638> Removable Direct Access SCSI-4 device da12: Serial Number AA2A1E4C00000195 da12: 1.000MB/s transfers da12: 15600MB (31950720 512 byte sectors: 255H 63S/T 1988C) da8 at umass-sim0 bus 0 target 0 lun 0 da8: <Generic- Compact Flash 1.00> Removable Direct Access SCSI-0 device da8: Serial Number 20021111153705700 da8: 1.000MB/s transfers da8: Attempt to query device size failed: NOT READY, Medium not present can't re-use a leaf (20021111153705700)! da9 at umass-sim0 bus 0 target 0 lun 1 da9: <Generic- SM/xD-Picture 1.00> Removable Direct Access SCSI-0 device da9: Serial Number 20021111153705700 da9: 1.000MB/s transfers da9: Attempt to query device size failed: NOT READY, Medium not present can't re-use a leaf (20021111153705700)! da10 at umass-sim0 bus 0 target 0 lun 2 da10: <Generic- SD/MMC 1.00> Removable Direct Access SCSI-0 device da10: Serial Number 20021111153705700 da10: 1.000MB/s transfers da10: Attempt to query device size failed: NOT READY, Medium not present can't re-use a leaf (20021111153705700)! da11 at umass-sim0 bus 0 target 0 lun 3 da11: <Generic- MS/MS-Pro 1.00> Removable Direct Access SCSI-0 device da11: Serial Number 20021111153705700 da11: 1.000MB/s transfers da11: Attempt to query device size failed: NOT READY, Medium not present cd0 at ahci0 bus 1 target 0 lun 0 cd0: <HL-DT-ST DVDRRW GSA-H30L S655> Removable CD-ROM SCSI-0 device cd0: 150.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Logical unit is in process of becoming ready no B_DEVMAGIC (bootdev=0) Mounting root from hammer:serno/110510PCK404GLHKLMBJ.s3d HAMMER(ROOT) recovery check seqno=001b90cf HAMMER(ROOT) recovery range 3000000014d8b708-3000000014d8b708 HAMMER(ROOT) recovery nexto 3000000014d8b708 endseqno=001b90d0 HAMMER(ROOT) mounted clean, no recovery needed DMA space used: 6160k, remaining available: 16384k Mounting devfs -- You have received this notification because you have either subscribed to it, or are involved in it. To change your notification preferences, please click here: http://bugs.dragonflybsd.org/my/account