[DragonFlyBSD - Bug #3198] OpenGL app crash with Radeon driver
Issue #3198 has been updated by ftigeot. Among the three choices, I'd say get the R7 240. - R5 230: are rebadged models and variants of your existing chips. they will most likely exhibit the same issue. - RX550: it's a new generation and equires the amdgpu driver. A port of the driver is almost working but I can't say when the last issues will finally be ironed out. - R7 240 => that one is known to work fine and is a different radeon generation than the R5. Get a variant with a 128bit memory bus if speed is important four you. Bug #3198: OpenGL app crash with Radeon driver http://bugs.dragonflybsd.org/issues/3198#change-13791 * Author: yellowrabbit2010 * Status: Resolved * Priority: High * Assignee: * Category: Driver * Target version: The programs I work with, namely, FreeCAD, Kicad, MPV, Chromium crash with ``vm_fault: pager read error'' at different times, sometimes immediately after starting, sometimes after some manipulations. I managed to repeat the situation on the configuration with minimal changes: - I downloaded DragonFly-X86_64-LATEST.img.bz2 2019-07-16 03:56 285M - installed it on 8G usb flash drive - modify rc.conf and wpa_supplicant.conf in order to connect to WiFi - pkg install Xorg mesa-demos - added user rabbit - startx - glxgears Glxgears crushed immediately after start. Unfortunately, the test installation does not contain packages with debug information, so its core file is not very informative. But since the situation is always repeated, I built packages with debug information and made a screenshot of the gdb file with the downloaded core on the working machine (KERNCONF=X86_64_GENERIC). I have to note that I use the core of the March version and it has no problems with graphics at all: there have been no failures for a long time with all the programs listed above. That is, it is unlikely that this is a video memory or swap file problem and so on. = 5.5-DEVELOPMENT DragonFly v5.5.0.325.gf6792-DEVELOPMENT #25: Sun Mar 24 09:54:07 VLAT 2019 = I made an image of the flash drive immediately after the failure, you can download it from here https://yellowrabbit.gitlab.io/pub/bugs/dfly-glxgears.img.xz . There are no passwords neither for the rabbit user nor for root. ---Files IMG_20190718_080950_HDR-min.jpg (1.83 MB) Xorg.0.log (27.6 KB) gdb-0.txt (558 Bytes) messages (34.9 KB) gdb-1.txt (2.72 KB) gdb-1.png (394 KB) glxgears.core.xz (298 KB) IMG_20190724_210557_HDR-min.jpg (2.57 MB) vga.txz (312 KB) IMG_20190727_194932_HDR.jpg (4.11 MB) core.txt.0 (1.12 MB) messages (35.1 KB) core.txt.2 (1.47 MB) core.txt.3 (1.73 MB) -- You have received this notification because you have either subscribed to it, or are involved in it. To change your notification preferences, please click here: http://bugs.dragonflybsd.org/my/account
[DragonFlyBSD - Bug #3198] OpenGL app crash with Radeon driver
Issue #3198 has been updated by yellowrabbit2010. Thanks for your work. As I understand it, you have video cards of this type that do not show any glitches. At a local store I can purchase R7 240, R5 230 or RX 550. Bug #3198: OpenGL app crash with Radeon driver http://bugs.dragonflybsd.org/issues/3198#change-13790 * Author: yellowrabbit2010 * Status: Resolved * Priority: High * Assignee: * Category: Driver * Target version: The programs I work with, namely, FreeCAD, Kicad, MPV, Chromium crash with ``vm_fault: pager read error'' at different times, sometimes immediately after starting, sometimes after some manipulations. I managed to repeat the situation on the configuration with minimal changes: - I downloaded DragonFly-X86_64-LATEST.img.bz2 2019-07-16 03:56 285M - installed it on 8G usb flash drive - modify rc.conf and wpa_supplicant.conf in order to connect to WiFi - pkg install Xorg mesa-demos - added user rabbit - startx - glxgears Glxgears crushed immediately after start. Unfortunately, the test installation does not contain packages with debug information, so its core file is not very informative. But since the situation is always repeated, I built packages with debug information and made a screenshot of the gdb file with the downloaded core on the working machine (KERNCONF=X86_64_GENERIC). I have to note that I use the core of the March version and it has no problems with graphics at all: there have been no failures for a long time with all the programs listed above. That is, it is unlikely that this is a video memory or swap file problem and so on. = 5.5-DEVELOPMENT DragonFly v5.5.0.325.gf6792-DEVELOPMENT #25: Sun Mar 24 09:54:07 VLAT 2019 = I made an image of the flash drive immediately after the failure, you can download it from here https://yellowrabbit.gitlab.io/pub/bugs/dfly-glxgears.img.xz . There are no passwords neither for the rabbit user nor for root. ---Files IMG_20190718_080950_HDR-min.jpg (1.83 MB) Xorg.0.log (27.6 KB) gdb-0.txt (558 Bytes) messages (34.9 KB) gdb-1.txt (2.72 KB) gdb-1.png (394 KB) glxgears.core.xz (298 KB) IMG_20190724_210557_HDR-min.jpg (2.57 MB) vga.txz (312 KB) IMG_20190727_194932_HDR.jpg (4.11 MB) core.txt.0 (1.12 MB) messages (35.1 KB) core.txt.2 (1.47 MB) core.txt.3 (1.73 MB) -- You have received this notification because you have either subscribed to it, or are involved in it. To change your notification preferences, please click here: http://bugs.dragonflybsd.org/my/account
[DragonFlyBSD - Bug #3198] OpenGL app crash with Radeon driver
Issue #3198 has been updated by yellowrabbit2010. File core.txt.3 added Very fast crash in the FreeCAD when trying to open a file with a model. <118>Aug 16 08:17:07 fly kernel: [drm] Initialized radeon 2.45.0 20080528 panic: BUG in ttm_bo_add_to_lru at /usr/src/sys/dev/drm/drm/../ttm/ttm_bo.c:173 cpuid = 0 Trace beginning at frame 0xf803a4857198 ttm_bo_add_to_lru() at ttm_bo_add_to_lru+0x13a 0x84f5752a ttm_bo_add_to_lru() at ttm_bo_add_to_lru+0x13a 0x84f5752a ttm_eu_fence_buffer_objects() at ttm_eu_fence_buffer_objects+0x5d 0x84f5ae9d radeon_cs_parser_fini() at radeon_cs_parser_fini+0x19d 0x8387cecd radeon_cs_ioctl() at radeon_cs_ioctl+0x5ea 0x8387d9ba drm_ioctl() at drm_ioctl+0xe9 0x84f3ea89 boot() called on cpu#0 Uptime: 4m52s Physical memory: 20375 MB Bug #3198: OpenGL app crash with Radeon driver http://bugs.dragonflybsd.org/issues/3198#change-13785 * Author: yellowrabbit2010 * Status: In Progress * Priority: High * Assignee: * Category: Driver * Target version: The programs I work with, namely, FreeCAD, Kicad, MPV, Chromium crash with ``vm_fault: pager read error'' at different times, sometimes immediately after starting, sometimes after some manipulations. I managed to repeat the situation on the configuration with minimal changes: - I downloaded DragonFly-X86_64-LATEST.img.bz2 2019-07-16 03:56 285M - installed it on 8G usb flash drive - modify rc.conf and wpa_supplicant.conf in order to connect to WiFi - pkg install Xorg mesa-demos - added user rabbit - startx - glxgears Glxgears crushed immediately after start. Unfortunately, the test installation does not contain packages with debug information, so its core file is not very informative. But since the situation is always repeated, I built packages with debug information and made a screenshot of the gdb file with the downloaded core on the working machine (KERNCONF=X86_64_GENERIC). I have to note that I use the core of the March version and it has no problems with graphics at all: there have been no failures for a long time with all the programs listed above. That is, it is unlikely that this is a video memory or swap file problem and so on. = 5.5-DEVELOPMENT DragonFly v5.5.0.325.gf6792-DEVELOPMENT #25: Sun Mar 24 09:54:07 VLAT 2019 = I made an image of the flash drive immediately after the failure, you can download it from here https://yellowrabbit.gitlab.io/pub/bugs/dfly-glxgears.img.xz . There are no passwords neither for the rabbit user nor for root. ---Files IMG_20190718_080950_HDR-min.jpg (1.83 MB) Xorg.0.log (27.6 KB) gdb-0.txt (558 Bytes) messages (34.9 KB) gdb-1.txt (2.72 KB) gdb-1.png (394 KB) glxgears.core.xz (298 KB) IMG_20190724_210557_HDR-min.jpg (2.57 MB) vga.txz (312 KB) IMG_20190727_194932_HDR.jpg (4.11 MB) core.txt.0 (1.12 MB) messages (35.1 KB) core.txt.2 (1.47 MB) core.txt.3 (1.73 MB) -- You have received this notification because you have either subscribed to it, or are involved in it. To change your notification preferences, please click here: http://bugs.dragonflybsd.org/my/account
[DragonFlyBSD - Bug #3198] OpenGL app crash with Radeon driver
Issue #3198 has been updated by yellowrabbit2010. File core.txt.2 added Quick crash of KiCad when trying to open the PCB editor. panic: BUG in ttm_bo_add_to_lru at /usr/src/sys/dev/drm/drm/../ttm/ttm_bo.c:173 cpuid = 0 Trace beginning at frame 0xf803ab7bb198 ttm_bo_add_to_lru() at ttm_bo_add_to_lru+0x13a 0x84f5752a ttm_bo_add_to_lru() at ttm_bo_add_to_lru+0x13a 0x84f5752a ttm_eu_fence_buffer_objects() at ttm_eu_fence_buffer_objects+0x5d 0x84f5ae9d radeon_cs_parser_fini() at radeon_cs_parser_fini+0x19d 0x8387cecd radeon_cs_ioctl() at radeon_cs_ioctl+0x5ea 0x8387d9ba drm_ioctl() at drm_ioctl+0xe9 0x84f3ea89 boot() called on cpu#0 Uptime: 26m16s Bug #3198: OpenGL app crash with Radeon driver http://bugs.dragonflybsd.org/issues/3198#change-13784 * Author: yellowrabbit2010 * Status: In Progress * Priority: High * Assignee: * Category: Driver * Target version: The programs I work with, namely, FreeCAD, Kicad, MPV, Chromium crash with ``vm_fault: pager read error'' at different times, sometimes immediately after starting, sometimes after some manipulations. I managed to repeat the situation on the configuration with minimal changes: - I downloaded DragonFly-X86_64-LATEST.img.bz2 2019-07-16 03:56 285M - installed it on 8G usb flash drive - modify rc.conf and wpa_supplicant.conf in order to connect to WiFi - pkg install Xorg mesa-demos - added user rabbit - startx - glxgears Glxgears crushed immediately after start. Unfortunately, the test installation does not contain packages with debug information, so its core file is not very informative. But since the situation is always repeated, I built packages with debug information and made a screenshot of the gdb file with the downloaded core on the working machine (KERNCONF=X86_64_GENERIC). I have to note that I use the core of the March version and it has no problems with graphics at all: there have been no failures for a long time with all the programs listed above. That is, it is unlikely that this is a video memory or swap file problem and so on. = 5.5-DEVELOPMENT DragonFly v5.5.0.325.gf6792-DEVELOPMENT #25: Sun Mar 24 09:54:07 VLAT 2019 = I made an image of the flash drive immediately after the failure, you can download it from here https://yellowrabbit.gitlab.io/pub/bugs/dfly-glxgears.img.xz . There are no passwords neither for the rabbit user nor for root. ---Files IMG_20190718_080950_HDR-min.jpg (1.83 MB) Xorg.0.log (27.6 KB) gdb-0.txt (558 Bytes) messages (34.9 KB) gdb-1.txt (2.72 KB) gdb-1.png (394 KB) glxgears.core.xz (298 KB) IMG_20190724_210557_HDR-min.jpg (2.57 MB) vga.txz (312 KB) IMG_20190727_194932_HDR.jpg (4.11 MB) core.txt.0 (1.12 MB) messages (35.1 KB) core.txt.2 (1.47 MB) -- You have received this notification because you have either subscribed to it, or are involved in it. To change your notification preferences, please click here: http://bugs.dragonflybsd.org/my/account
[DragonFlyBSD - Bug #3198] OpenGL app crash with Radeon driver
Issue #3198 has been updated by yellowrabbit2010. File messages added After about half an hour working with Chromium, at the moment when I moved the mouse, the Xorg died:( kernel: ttm_bo_wait(): ret = 1 Bug #3198: OpenGL app crash with Radeon driver http://bugs.dragonflybsd.org/issues/3198#change-13783 * Author: yellowrabbit2010 * Status: In Progress * Priority: High * Assignee: * Category: Driver * Target version: The programs I work with, namely, FreeCAD, Kicad, MPV, Chromium crash with ``vm_fault: pager read error'' at different times, sometimes immediately after starting, sometimes after some manipulations. I managed to repeat the situation on the configuration with minimal changes: - I downloaded DragonFly-X86_64-LATEST.img.bz2 2019-07-16 03:56 285M - installed it on 8G usb flash drive - modify rc.conf and wpa_supplicant.conf in order to connect to WiFi - pkg install Xorg mesa-demos - added user rabbit - startx - glxgears Glxgears crushed immediately after start. Unfortunately, the test installation does not contain packages with debug information, so its core file is not very informative. But since the situation is always repeated, I built packages with debug information and made a screenshot of the gdb file with the downloaded core on the working machine (KERNCONF=X86_64_GENERIC). I have to note that I use the core of the March version and it has no problems with graphics at all: there have been no failures for a long time with all the programs listed above. That is, it is unlikely that this is a video memory or swap file problem and so on. = 5.5-DEVELOPMENT DragonFly v5.5.0.325.gf6792-DEVELOPMENT #25: Sun Mar 24 09:54:07 VLAT 2019 = I made an image of the flash drive immediately after the failure, you can download it from here https://yellowrabbit.gitlab.io/pub/bugs/dfly-glxgears.img.xz . There are no passwords neither for the rabbit user nor for root. ---Files IMG_20190718_080950_HDR-min.jpg (1.83 MB) Xorg.0.log (27.6 KB) gdb-0.txt (558 Bytes) messages (34.9 KB) gdb-1.txt (2.72 KB) gdb-1.png (394 KB) glxgears.core.xz (298 KB) IMG_20190724_210557_HDR-min.jpg (2.57 MB) vga.txz (312 KB) IMG_20190727_194932_HDR.jpg (4.11 MB) core.txt.0 (1.12 MB) messages (35.1 KB) -- You have received this notification because you have either subscribed to it, or are involved in it. To change your notification preferences, please click here: http://bugs.dragonflybsd.org/my/account
[DragonFlyBSD - Bug #3198] OpenGL app crash with Radeon driver
Issue #3198 has been updated by yellowrabbit2010. File core.txt.0 added v5.7.0-241-g7cc1c1be6e Improvement is obvious! I was able to launch several glxgears and a cuberender. Also, chromium did not crash. Good (always repeatable) kernel panics with MPV with VDPAU as output. I still need to check the work of this version under load for many hours, tomorrow I will write more. If necessary, I can upload vmcore.0 and kern.0 somewhere, it just will take awhile. Bug #3198: OpenGL app crash with Radeon driver http://bugs.dragonflybsd.org/issues/3198#change-13782 * Author: yellowrabbit2010 * Status: In Progress * Priority: High * Assignee: * Category: Driver * Target version: The programs I work with, namely, FreeCAD, Kicad, MPV, Chromium crash with ``vm_fault: pager read error'' at different times, sometimes immediately after starting, sometimes after some manipulations. I managed to repeat the situation on the configuration with minimal changes: - I downloaded DragonFly-X86_64-LATEST.img.bz2 2019-07-16 03:56 285M - installed it on 8G usb flash drive - modify rc.conf and wpa_supplicant.conf in order to connect to WiFi - pkg install Xorg mesa-demos - added user rabbit - startx - glxgears Glxgears crushed immediately after start. Unfortunately, the test installation does not contain packages with debug information, so its core file is not very informative. But since the situation is always repeated, I built packages with debug information and made a screenshot of the gdb file with the downloaded core on the working machine (KERNCONF=X86_64_GENERIC). I have to note that I use the core of the March version and it has no problems with graphics at all: there have been no failures for a long time with all the programs listed above. That is, it is unlikely that this is a video memory or swap file problem and so on. = 5.5-DEVELOPMENT DragonFly v5.5.0.325.gf6792-DEVELOPMENT #25: Sun Mar 24 09:54:07 VLAT 2019 = I made an image of the flash drive immediately after the failure, you can download it from here https://yellowrabbit.gitlab.io/pub/bugs/dfly-glxgears.img.xz . There are no passwords neither for the rabbit user nor for root. ---Files IMG_20190718_080950_HDR-min.jpg (1.83 MB) Xorg.0.log (27.6 KB) gdb-0.txt (558 Bytes) messages (34.9 KB) gdb-1.txt (2.72 KB) gdb-1.png (394 KB) glxgears.core.xz (298 KB) IMG_20190724_210557_HDR-min.jpg (2.57 MB) vga.txz (312 KB) IMG_20190727_194932_HDR.jpg (4.11 MB) core.txt.0 (1.12 MB) -- You have received this notification because you have either subscribed to it, or are involved in it. To change your notification preferences, please click here: http://bugs.dragonflybsd.org/my/account
[DragonFlyBSD - Bug #3198] OpenGL app crash with Radeon driver
Issue #3198 has been updated by ftigeot. The pager read error appears to always be from this chunk of code in ttm/ttm_bo_vm.c around line 550: ``` /* * Wait for buffer data in transit, due to a pipelined * move. */ if (test_bit(TTM_BO_PRIV_FLAG_MOVING, &bo->priv_flags)) { /* * Here, the behavior differs between Linux and FreeBSD. * * On Linux, the wait is interruptible (3rd argument to * ttm_bo_wait). There must be some mechanism to resume * page fault handling, once the signal is processed. * * On FreeBSD, the wait is uninteruptible. This is not a * problem as we can't end up with an unkillable process * here, because the wait will eventually time out. * * An example of this situation is the Xorg process * which uses SIGALRM internally. The signal could * interrupt the wait, causing the page fault to fail * and the process to receive SIGSEGV. */ ret = ttm_bo_wait(bo, false, false); if (unlikely(ret != 0)) { retval = VM_PAGER_ERROR; goto out_unlock; } } ``` Bug #3198: OpenGL app crash with Radeon driver http://bugs.dragonflybsd.org/issues/3198#change-13780 * Author: yellowrabbit2010 * Status: New * Priority: High * Assignee: * Category: Driver * Target version: The programs I work with, namely, FreeCAD, Kicad, MPV, Chromium crash with ``vm_fault: pager read error'' at different times, sometimes immediately after starting, sometimes after some manipulations. I managed to repeat the situation on the configuration with minimal changes: - I downloaded DragonFly-X86_64-LATEST.img.bz2 2019-07-16 03:56 285M - installed it on 8G usb flash drive - modify rc.conf and wpa_supplicant.conf in order to connect to WiFi - pkg install Xorg mesa-demos - added user rabbit - startx - glxgears Glxgears crushed immediately after start. Unfortunately, the test installation does not contain packages with debug information, so its core file is not very informative. But since the situation is always repeated, I built packages with debug information and made a screenshot of the gdb file with the downloaded core on the working machine (KERNCONF=X86_64_GENERIC). I have to note that I use the core of the March version and it has no problems with graphics at all: there have been no failures for a long time with all the programs listed above. That is, it is unlikely that this is a video memory or swap file problem and so on. = 5.5-DEVELOPMENT DragonFly v5.5.0.325.gf6792-DEVELOPMENT #25: Sun Mar 24 09:54:07 VLAT 2019 = I made an image of the flash drive immediately after the failure, you can download it from here https://yellowrabbit.gitlab.io/pub/bugs/dfly-glxgears.img.xz . There are no passwords neither for the rabbit user nor for root. ---Files IMG_20190718_080950_HDR-min.jpg (1.83 MB) Xorg.0.log (27.6 KB) gdb-0.txt (558 Bytes) messages (34.9 KB) gdb-1.txt (2.72 KB) gdb-1.png (394 KB) glxgears.core.xz (298 KB) IMG_20190724_210557_HDR-min.jpg (2.57 MB) vga.txz (312 KB) IMG_20190727_194932_HDR.jpg (4.11 MB) -- You have received this notification because you have either subscribed to it, or are involved in it. To change your notification preferences, please click here: http://bugs.dragonflybsd.org/my/account
[DragonFlyBSD - Bug #3198] OpenGL app crash with Radeon driver
Issue #3198 has been updated by yellowrabbit2010. You're right. I got the same commit (fca8eb81f38c6d4b27e5fa79e030f0647dee0739) as the first one demonstrating a bug in glxgears. And you are probably right as well in the fact that this commit is not the cause of failures, it just makes the problem very easy and quickly demonstrated. The kernels that I tried after March 24 crashed with the same error, but after 3–4 hours of intensive work with graphic applications or mpv and it was impossible to make a normal error report with an easily repeated sequence of actions. Bug #3198: OpenGL app crash with Radeon driver http://bugs.dragonflybsd.org/issues/3198#change-13771 * Author: yellowrabbit2010 * Status: New * Priority: High * Assignee: * Category: Driver * Target version: The programs I work with, namely, FreeCAD, Kicad, MPV, Chromium crash with ``vm_fault: pager read error'' at different times, sometimes immediately after starting, sometimes after some manipulations. I managed to repeat the situation on the configuration with minimal changes: - I downloaded DragonFly-X86_64-LATEST.img.bz2 2019-07-16 03:56 285M - installed it on 8G usb flash drive - modify rc.conf and wpa_supplicant.conf in order to connect to WiFi - pkg install Xorg mesa-demos - added user rabbit - startx - glxgears Glxgears crushed immediately after start. Unfortunately, the test installation does not contain packages with debug information, so its core file is not very informative. But since the situation is always repeated, I built packages with debug information and made a screenshot of the gdb file with the downloaded core on the working machine (KERNCONF=X86_64_GENERIC). I have to note that I use the core of the March version and it has no problems with graphics at all: there have been no failures for a long time with all the programs listed above. That is, it is unlikely that this is a video memory or swap file problem and so on. = 5.5-DEVELOPMENT DragonFly v5.5.0.325.gf6792-DEVELOPMENT #25: Sun Mar 24 09:54:07 VLAT 2019 = I made an image of the flash drive immediately after the failure, you can download it from here https://yellowrabbit.gitlab.io/pub/bugs/dfly-glxgears.img.xz . There are no passwords neither for the rabbit user nor for root. ---Files IMG_20190718_080950_HDR-min.jpg (1.83 MB) Xorg.0.log (27.6 KB) gdb-0.txt (558 Bytes) messages (34.9 KB) gdb-1.txt (2.72 KB) gdb-1.png (394 KB) glxgears.core.xz (298 KB) IMG_20190724_210557_HDR-min.jpg (2.57 MB) vga.txz (312 KB) IMG_20190727_194932_HDR.jpg (4.11 MB) -- You have received this notification because you have either subscribed to it, or are involved in it. To change your notification preferences, please click here: http://bugs.dragonflybsd.org/my/account
[DragonFlyBSD - Bug #3198] OpenGL app crash with Radeon driver
Issue #3198 has been updated by ftigeot. I have pushed drm_ttm_radeon_3_19_8_bisect_vmfault to leaf and bisected what I could myself. (It can be necessary to comment out drm/i915 from the tree to build successfully) The first bad commit in that branch is fca8eb81f38c6d4b27e5fa79e030f0647dee0739 "drm/radeon: Try placing NO_CPU_ACCESS BOs outside of CPU accessible VRAM" I tried to revert it in master but am still getting weird vm faults+crashes after a while. Bug #3198: OpenGL app crash with Radeon driver http://bugs.dragonflybsd.org/issues/3198#change-13770 * Author: yellowrabbit2010 * Status: New * Priority: High * Assignee: * Category: Driver * Target version: The programs I work with, namely, FreeCAD, Kicad, MPV, Chromium crash with ``vm_fault: pager read error'' at different times, sometimes immediately after starting, sometimes after some manipulations. I managed to repeat the situation on the configuration with minimal changes: - I downloaded DragonFly-X86_64-LATEST.img.bz2 2019-07-16 03:56 285M - installed it on 8G usb flash drive - modify rc.conf and wpa_supplicant.conf in order to connect to WiFi - pkg install Xorg mesa-demos - added user rabbit - startx - glxgears Glxgears crushed immediately after start. Unfortunately, the test installation does not contain packages with debug information, so its core file is not very informative. But since the situation is always repeated, I built packages with debug information and made a screenshot of the gdb file with the downloaded core on the working machine (KERNCONF=X86_64_GENERIC). I have to note that I use the core of the March version and it has no problems with graphics at all: there have been no failures for a long time with all the programs listed above. That is, it is unlikely that this is a video memory or swap file problem and so on. = 5.5-DEVELOPMENT DragonFly v5.5.0.325.gf6792-DEVELOPMENT #25: Sun Mar 24 09:54:07 VLAT 2019 = I made an image of the flash drive immediately after the failure, you can download it from here https://yellowrabbit.gitlab.io/pub/bugs/dfly-glxgears.img.xz . There are no passwords neither for the rabbit user nor for root. ---Files IMG_20190718_080950_HDR-min.jpg (1.83 MB) Xorg.0.log (27.6 KB) gdb-0.txt (558 Bytes) messages (34.9 KB) gdb-1.txt (2.72 KB) gdb-1.png (394 KB) glxgears.core.xz (298 KB) IMG_20190724_210557_HDR-min.jpg (2.57 MB) vga.txz (312 KB) IMG_20190727_194932_HDR.jpg (4.11 MB) -- You have received this notification because you have either subscribed to it, or are involved in it. To change your notification preferences, please click here: http://bugs.dragonflybsd.org/my/account
[DragonFlyBSD - Bug #3198] OpenGL app crash with Radeon driver
Issue #3198 has been updated by yellowrabbit2010. The first commit on which the glxgears error occurs (vm_fault: pager read error) is 7dcf36dc33228b5b368783d7b6f7ada00ee671d6 on master (Thu Jun 20, drm/radeon: Upgrade to Linux 3.19.8). Is there a branch with individual changes? Bug #3198: OpenGL app crash with Radeon driver http://bugs.dragonflybsd.org/issues/3198#change-13768 * Author: yellowrabbit2010 * Status: New * Priority: High * Assignee: * Category: Driver * Target version: The programs I work with, namely, FreeCAD, Kicad, MPV, Chromium crash with ``vm_fault: pager read error'' at different times, sometimes immediately after starting, sometimes after some manipulations. I managed to repeat the situation on the configuration with minimal changes: - I downloaded DragonFly-X86_64-LATEST.img.bz2 2019-07-16 03:56 285M - installed it on 8G usb flash drive - modify rc.conf and wpa_supplicant.conf in order to connect to WiFi - pkg install Xorg mesa-demos - added user rabbit - startx - glxgears Glxgears crushed immediately after start. Unfortunately, the test installation does not contain packages with debug information, so its core file is not very informative. But since the situation is always repeated, I built packages with debug information and made a screenshot of the gdb file with the downloaded core on the working machine (KERNCONF=X86_64_GENERIC). I have to note that I use the core of the March version and it has no problems with graphics at all: there have been no failures for a long time with all the programs listed above. That is, it is unlikely that this is a video memory or swap file problem and so on. = 5.5-DEVELOPMENT DragonFly v5.5.0.325.gf6792-DEVELOPMENT #25: Sun Mar 24 09:54:07 VLAT 2019 = I made an image of the flash drive immediately after the failure, you can download it from here https://yellowrabbit.gitlab.io/pub/bugs/dfly-glxgears.img.xz . There are no passwords neither for the rabbit user nor for root. ---Files IMG_20190718_080950_HDR-min.jpg (1.83 MB) Xorg.0.log (27.6 KB) gdb-0.txt (558 Bytes) messages (34.9 KB) gdb-1.txt (2.72 KB) gdb-1.png (394 KB) glxgears.core.xz (298 KB) IMG_20190724_210557_HDR-min.jpg (2.57 MB) vga.txz (312 KB) IMG_20190727_194932_HDR.jpg (4.11 MB) -- You have received this notification because you have either subscribed to it, or are involved in it. To change your notification preferences, please click here: http://bugs.dragonflybsd.org/my/account
[DragonFlyBSD - Bug #3198] OpenGL app crash with Radeon driver
Issue #3198 has been updated by yellowrabbit2010. File IMG_20190727_194932_HDR.jpg added Thanks! Yes, the trick with disabled acceleration allows to work without failures on the kernel 4685ca1cc305dbcd40d614ecc70f60a6a71ba453 :) I, on the other hand, built the working kernels until March 20, 2019 (v5.5.0-300-g2bbc7733d6) and am going to move on until I stop on the non-working kernel. Of course, I’ll stop if you’re already clear about the reason for the failure:) Bug #3198: OpenGL app crash with Radeon driver http://bugs.dragonflybsd.org/issues/3198#change-13762 * Author: yellowrabbit2010 * Status: New * Priority: High * Assignee: * Category: Driver * Target version: The programs I work with, namely, FreeCAD, Kicad, MPV, Chromium crash with ``vm_fault: pager read error'' at different times, sometimes immediately after starting, sometimes after some manipulations. I managed to repeat the situation on the configuration with minimal changes: - I downloaded DragonFly-X86_64-LATEST.img.bz2 2019-07-16 03:56 285M - installed it on 8G usb flash drive - modify rc.conf and wpa_supplicant.conf in order to connect to WiFi - pkg install Xorg mesa-demos - added user rabbit - startx - glxgears Glxgears crushed immediately after start. Unfortunately, the test installation does not contain packages with debug information, so its core file is not very informative. But since the situation is always repeated, I built packages with debug information and made a screenshot of the gdb file with the downloaded core on the working machine (KERNCONF=X86_64_GENERIC). I have to note that I use the core of the March version and it has no problems with graphics at all: there have been no failures for a long time with all the programs listed above. That is, it is unlikely that this is a video memory or swap file problem and so on. = 5.5-DEVELOPMENT DragonFly v5.5.0.325.gf6792-DEVELOPMENT #25: Sun Mar 24 09:54:07 VLAT 2019 = I made an image of the flash drive immediately after the failure, you can download it from here https://yellowrabbit.gitlab.io/pub/bugs/dfly-glxgears.img.xz . There are no passwords neither for the rabbit user nor for root. ---Files IMG_20190718_080950_HDR-min.jpg (1.83 MB) Xorg.0.log (27.6 KB) gdb-0.txt (558 Bytes) messages (34.9 KB) gdb-1.txt (2.72 KB) gdb-1.png (394 KB) glxgears.core.xz (298 KB) IMG_20190724_210557_HDR-min.jpg (2.57 MB) vga.txz (312 KB) IMG_20190727_194932_HDR.jpg (4.11 MB) -- You have received this notification because you have either subscribed to it, or are involved in it. To change your notification preferences, please click here: http://bugs.dragonflybsd.org/my/account
[DragonFlyBSD - Bug #3198] OpenGL app crash with Radeon driver
Issue #3198 has been updated by ftigeot. I managed to dig up an old Radeon HD5450 which appears to exhibit the bug. There is no fix yet, but a workaround. Disabling acceleration in xorg.conf will stop the crashes from happening. Adding the line Option "NoAccel" "TRUE" in a Device section should do the trick: Section "Device" Identifier "Card1" VendorName "Advanced Micro Devices [AMD] nee ATI" BoardName "RV370 [Radeon X550]" Driver "radeon" Option "NoAccel" "TRUE" BusID "PCI:1:0:0" EndSection Bug #3198: OpenGL app crash with Radeon driver http://bugs.dragonflybsd.org/issues/3198#change-13761 * Author: yellowrabbit2010 * Status: New * Priority: High * Assignee: * Category: Driver * Target version: The programs I work with, namely, FreeCAD, Kicad, MPV, Chromium crash with ``vm_fault: pager read error'' at different times, sometimes immediately after starting, sometimes after some manipulations. I managed to repeat the situation on the configuration with minimal changes: - I downloaded DragonFly-X86_64-LATEST.img.bz2 2019-07-16 03:56 285M - installed it on 8G usb flash drive - modify rc.conf and wpa_supplicant.conf in order to connect to WiFi - pkg install Xorg mesa-demos - added user rabbit - startx - glxgears Glxgears crushed immediately after start. Unfortunately, the test installation does not contain packages with debug information, so its core file is not very informative. But since the situation is always repeated, I built packages with debug information and made a screenshot of the gdb file with the downloaded core on the working machine (KERNCONF=X86_64_GENERIC). I have to note that I use the core of the March version and it has no problems with graphics at all: there have been no failures for a long time with all the programs listed above. That is, it is unlikely that this is a video memory or swap file problem and so on. = 5.5-DEVELOPMENT DragonFly v5.5.0.325.gf6792-DEVELOPMENT #25: Sun Mar 24 09:54:07 VLAT 2019 = I made an image of the flash drive immediately after the failure, you can download it from here https://yellowrabbit.gitlab.io/pub/bugs/dfly-glxgears.img.xz . There are no passwords neither for the rabbit user nor for root. ---Files IMG_20190718_080950_HDR-min.jpg (1.83 MB) Xorg.0.log (27.6 KB) gdb-0.txt (558 Bytes) messages (34.9 KB) gdb-1.txt (2.72 KB) gdb-1.png (394 KB) glxgears.core.xz (298 KB) IMG_20190724_210557_HDR-min.jpg (2.57 MB) vga.txz (312 KB) -- You have received this notification because you have either subscribed to it, or are involved in it. To change your notification preferences, please click here: http://bugs.dragonflybsd.org/my/account
[DragonFlyBSD - Bug #3198] OpenGL app crash with Radeon driver
Issue #3198 has been updated by yellowrabbit2010. File IMG_20190724_210557_HDR-min.jpg added File vga.txz added Unfortunately, this commit is already bad:( I will try to build a working kernel of an earlier version. Bug #3198: OpenGL app crash with Radeon driver http://bugs.dragonflybsd.org/issues/3198#change-13759 * Author: yellowrabbit2010 * Status: New * Priority: High * Assignee: * Category: Driver * Target version: The programs I work with, namely, FreeCAD, Kicad, MPV, Chromium crash with ``vm_fault: pager read error'' at different times, sometimes immediately after starting, sometimes after some manipulations. I managed to repeat the situation on the configuration with minimal changes: - I downloaded DragonFly-X86_64-LATEST.img.bz2 2019-07-16 03:56 285M - installed it on 8G usb flash drive - modify rc.conf and wpa_supplicant.conf in order to connect to WiFi - pkg install Xorg mesa-demos - added user rabbit - startx - glxgears Glxgears crushed immediately after start. Unfortunately, the test installation does not contain packages with debug information, so its core file is not very informative. But since the situation is always repeated, I built packages with debug information and made a screenshot of the gdb file with the downloaded core on the working machine (KERNCONF=X86_64_GENERIC). I have to note that I use the core of the March version and it has no problems with graphics at all: there have been no failures for a long time with all the programs listed above. That is, it is unlikely that this is a video memory or swap file problem and so on. = 5.5-DEVELOPMENT DragonFly v5.5.0.325.gf6792-DEVELOPMENT #25: Sun Mar 24 09:54:07 VLAT 2019 = I made an image of the flash drive immediately after the failure, you can download it from here https://yellowrabbit.gitlab.io/pub/bugs/dfly-glxgears.img.xz . There are no passwords neither for the rabbit user nor for root. ---Files IMG_20190718_080950_HDR-min.jpg (1.83 MB) Xorg.0.log (27.6 KB) gdb-0.txt (558 Bytes) messages (34.9 KB) gdb-1.txt (2.72 KB) gdb-1.png (394 KB) glxgears.core.xz (298 KB) IMG_20190724_210557_HDR-min.jpg (2.57 MB) vga.txz (312 KB) -- You have received this notification because you have either subscribed to it, or are involved in it. To change your notification preferences, please click here: http://bugs.dragonflybsd.org/my/account
[DragonFlyBSD - Bug #3198] OpenGL app crash with Radeon driver
Issue #3198 has been updated by ftigeot. Thanks for this bug report. The issue looks to be hardware-specific though; I cannot reproduce it at will on any of my machines. The branch drm_ttm_radeon_4_4_180_v1 on leaf contains the individual changes leading to the Linux 4.4.180 update. Can you bisect the changes on your hardware ? Some instructions on how to do that: * git remote add leaf git://leaf.dragonflybsd.org/~ftigeot/dragonfly.git * git fetch leaf * git checkout drm_ttm_radeon_4_4_180_v1 * git checkout 211521498c6a0f6fdedfa4c7210a9b3f57aeef0e * make kernel && reboot That last git checkout will give you the state of master just before the drm/radeon 4.4.180 changes If all goes well with that commit, you will then be able to find out which of the following ones broke opengl on your hardware Bug #3198: OpenGL app crash with Radeon driver http://bugs.dragonflybsd.org/issues/3198#change-13758 * Author: yellowrabbit2010 * Status: New * Priority: High * Assignee: * Category: Driver * Target version: The programs I work with, namely, FreeCAD, Kicad, MPV, Chromium crash with ``vm_fault: pager read error'' at different times, sometimes immediately after starting, sometimes after some manipulations. I managed to repeat the situation on the configuration with minimal changes: - I downloaded DragonFly-X86_64-LATEST.img.bz2 2019-07-16 03:56 285M - installed it on 8G usb flash drive - modify rc.conf and wpa_supplicant.conf in order to connect to WiFi - pkg install Xorg mesa-demos - added user rabbit - startx - glxgears Glxgears crushed immediately after start. Unfortunately, the test installation does not contain packages with debug information, so its core file is not very informative. But since the situation is always repeated, I built packages with debug information and made a screenshot of the gdb file with the downloaded core on the working machine (KERNCONF=X86_64_GENERIC). I have to note that I use the core of the March version and it has no problems with graphics at all: there have been no failures for a long time with all the programs listed above. That is, it is unlikely that this is a video memory or swap file problem and so on. = 5.5-DEVELOPMENT DragonFly v5.5.0.325.gf6792-DEVELOPMENT #25: Sun Mar 24 09:54:07 VLAT 2019 = I made an image of the flash drive immediately after the failure, you can download it from here https://yellowrabbit.gitlab.io/pub/bugs/dfly-glxgears.img.xz . There are no passwords neither for the rabbit user nor for root. ---Files IMG_20190718_080950_HDR-min.jpg (1.83 MB) Xorg.0.log (27.6 KB) gdb-0.txt (558 Bytes) messages (34.9 KB) gdb-1.txt (2.72 KB) gdb-1.png (394 KB) glxgears.core.xz (298 KB) -- You have received this notification because you have either subscribed to it, or are involved in it. To change your notification preferences, please click here: http://bugs.dragonflybsd.org/my/account
[DragonFlyBSD - Bug #3198] OpenGL app crash with Radeon driver
Issue #3198 has been updated by yellowrabbit2010. I use the core of the March version -> I use the kernel from March Bug #3198: OpenGL app crash with Radeon driver http://bugs.dragonflybsd.org/issues/3198#change-13757 * Author: yellowrabbit2010 * Status: New * Priority: High * Assignee: * Category: Driver * Target version: The programs I work with, namely, FreeCAD, Kicad, MPV, Chromium crash with ``vm_fault: pager read error'' at different times, sometimes immediately after starting, sometimes after some manipulations. I managed to repeat the situation on the configuration with minimal changes: - I downloaded DragonFly-X86_64-LATEST.img.bz2 2019-07-16 03:56 285M - installed it on 8G usb flash drive - modify rc.conf and wpa_supplicant.conf in order to connect to WiFi - pkg install Xorg mesa-demos - added user rabbit - startx - glxgears Glxgears crushed immediately after start. Unfortunately, the test installation does not contain packages with debug information, so its core file is not very informative. But since the situation is always repeated, I built packages with debug information and made a screenshot of the gdb file with the downloaded core on the working machine (KERNCONF=X86_64_GENERIC). I have to note that I use the core of the March version and it has no problems with graphics at all: there have been no failures for a long time with all the programs listed above. That is, it is unlikely that this is a video memory or swap file problem and so on. = 5.5-DEVELOPMENT DragonFly v5.5.0.325.gf6792-DEVELOPMENT #25: Sun Mar 24 09:54:07 VLAT 2019 = I made an image of the flash drive immediately after the failure, you can download it from here https://yellowrabbit.gitlab.io/pub/bugs/dfly-glxgears.img.xz . There are no passwords neither for the rabbit user nor for root. ---Files IMG_20190718_080950_HDR-min.jpg (1.83 MB) Xorg.0.log (27.6 KB) gdb-0.txt (558 Bytes) messages (34.9 KB) gdb-1.txt (2.72 KB) gdb-1.png (394 KB) glxgears.core.xz (298 KB) -- You have received this notification because you have either subscribed to it, or are involved in it. To change your notification preferences, please click here: http://bugs.dragonflybsd.org/my/account