Re: syspatch not installing 6.1 binary patches

lightenment - chop wood, draw water. Marko Cupać https://www.mimar.rs/

Re: syspatch not installing 6.1 binary patches

On Thu, 01 Mar 2018 07:23:15 -0700 "Theo de Raadt" wrote: > You realize you are asking for twice as much work to be done? Can I help with additional work? -- Before enlightenment - chop wood, draw water. After enlightenment - chop wood, draw water. Marko Cupać https://www.mimar.rs/

bge problems on 6.2

it at the moment), but I guess I could provide it if needed. Thank you in advance, -- Before enlightenment - chop wood, draw water. After enlightenment - chop wood, draw water. Marko Cupać https://www.mimar.rs/

Re: syspatch breaks calling stat on mfs filesystem

make that check stronger so that syspatch fails right away on > MFS-mounted /var. Way to go... -- Before enlightenment - chop wood, draw water. After enlightenment - chop wood, draw water. Marko Cupać https://www.mimar.rs/

Re: syspatch breaks calling stat on mfs filesystem

#x27;ve updated my article with workaround description, and whole install procedure and patching procedure will be ready by the end of next week. People interested in this thread probably know where to find it. -- Before enlightenment - chop wood, draw water. After enlightenment - chop wood, draw water. Marko Cupać https://www.mimar.rs/

Re: syspatch breaks calling stat on mfs filesystem

And I also think that "component X of OpenBSD won't do Y" should not be worded as "not supported by OpenBSD". Regards, -- Before enlightenment - chop wood, draw water. After enlightenment - chop wood, draw water. Marko Cupać https://www.mimar.rs/

Re: syspatch breaks calling stat on mfs filesystem

On Thu, 12 Dec 2019 11:13:28 -0700 "Theo de Raadt" wrote: > No. It ends here. Understood :D -- Before enlightenment - chop wood, draw water. After enlightenment - chop wood, draw water. Marko Cupać https://www.mimar.rs/

npppd hangs (under load)?

uhub4 at uhub0 port 3 configuration 1 interface 0 "Standard Microsystems product 0x2660" rev 2.00/8.01 addr 2 uhub5 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.05 addr 2uhub6 at uhub3 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.05 addr 2 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets sd2 at scsibus3 targ 1 lun 0: sd2: 953868MB, 512 bytes/sector, 1953523553 sectors root on sd2a (dda243cfdd16f46b.a) swap on sd2b dump on sd2b Thank you in advance, -- Before enlightenment - chop wood, draw water. After enlightenment - chop wood, draw water. Marko Cupać https://www.mimar.rs/

Re: npppd hangs (under load)?

On 2020-03-24 16:02, Marko Cupać wrote: Hi, I wrote already on @misc, but as I had kernel panic I am reporting it here as well. Recently my npppd server got an increase from ~20 to ~200 concurrent PPTP users. It worked fine with same configuration on various hardware for 7 years (right now on

Re: npppd hangs (under load)?

On 2020-03-25 13:26, Theo Buehler wrote: On Wed, Mar 25, 2020 at 01:05:51PM +0100, Marko Cupać wrote: On 2020-03-24 16:02, Marko Cupać wrote: > Hi, > > I wrote already on @misc, but as I had kernel panic I am reporting it > here as well. > > Recently my npppd server got an in

Re: Thinkpad T440 does not resume after suspend to RAM

iting this from T440, had to give up OpenBSD on it temporarily because of frequent wifi disconnects. Will definitely give it another try with 6.0 soon. Regards, -- Before enlightenment - chop wood, draw water. After enlightenment - chop wood, draw water. Marko Cupać https://www.mimar.rs/

Sound skips after upgrade to 6.5

v/usb0: addr 01: 8086: Intel, xHCI root hub super speed, self powered, config 1, rev 1.00 driver: uhub0 Controller /dev/usb1: addr 01: 8086: Intel, EHCI root hub high speed, self powered, config 1, rev 1.00 driver: uhub1 addr 02: 8087:8000 Intel, Rate Matching Hub high speed, self powered, config 1, rev 0.04 driver: uhub2 -- Before enlightenment - chop wood, draw water. After enlightenment - chop wood, draw water. Marko Cupać https://www.mimar.rs/

Re: Sound skips after upgrade to 6.5

targets > softraid0 at root > scsibus3 at softraid0: 256 targets > root on sd0a (8619f4098158d9e3.a) swap on sd0b dump on sd0b > iwm0: hw rev 0x140, fw ver 16.242414.0, address 5c:51:4f:78:c6:1b > > usbdevs: > Controller /dev/usb0: > addr 01: 8086: Intel, xHCI root hub >super speed, self powered, config 1, rev 1.00 >driver: uhub0 > Controller /dev/usb1: > addr 01: 8086: Intel, EHCI root hub >high speed, self powered, config 1, rev 1.00 >driver: uhub1 > addr 02: 8087:8000 Intel, Rate Matching Hub >high speed, self powered, config 1, rev 0.04 >driver: uhub2 > -- Before enlightenment - chop wood, draw water. After enlightenment - chop wood, draw water. Marko Cupać https://www.mimar.rs/

Re: Sound skips after upgrade to 6.5

On Fri, 3 May 2019 10:42:35 +0200 Marko Cupać wrote: > Sound is fine when mic is _enabled_ in BIOS, has problems when mic is > _disabled_ in BIOS. Hi, I heard of workaround on #openbsd irc channel, setting sndiod_flags="-m play" in rc.conf.local does the trick. Rega

snmpd snmpe AgentX disappeared unexpected

i0: 32 targets sd0 at scsibus1 targ 0 lun 0: naa.5000c500b5c25070 sd0: 953869MB, 512 bytes/sector, 1953525168 sectors sd1 at scsibus1 targ 1 lun 0: naa.5000c500b5c0e6a1 sd1: 953869MB, 512 bytes/sector, 1953525168 sectors ichiic0 at pci1 dev 31 function 3 "Intel C610 SMBus" rev 0x05: apic 8 int 18 iic0 at ichiic0 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard pcppi0 at isa0 port 0x61 spkr0 at pcppi0 vmm0 at mainbus0: VMX/EPT efifb0 at mainbus0: 1280x1024, 32bpp wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using wskbd0 wsdisplay0: screen 1-5 added (std, vt100 emulation) uhub4 at uhub0 port 3 configuration 1 interface 0 "Standard Microsystems product 0x2660" rev 2.00/8.01 addr 2 uhub5 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.05 addr 2 uhub6 at uhub3 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.05 addr 2 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets sd2 at scsibus3 targ 1 lun 0: sd2: 953868MB, 512 bytes/sector, 1953523553 sectors root on sd2a (e3d91cf556cc79fb.a) swap on sd2b dump on sd2b ---dmesg.boot--- -- Before enlightenment - chop wood, draw water. After enlightenment - chop wood, draw water. Marko Cupać https://www.mimar.rs/

pfsync manpage shows non-working example

, -- Before enlightenment - chop wood, draw water. After enlightenment - chop wood, draw water. Marko Cupać https://www.mimar.rs/

Re: panic: kernel diagnostic assertion "p->p_wchan == NULL" failed

ock_process_tick_timeout+0xfb softclock(0) at softclock+0xb8 softintr_dispatch(0) at softintr_dispatch+0xeb end trace frame: 0x800020dbc730, count:0 -- Before enlightenment - chop wood, draw water. After enlightenment - chop wood, draw water. Marko Cupać https://www.mimar.rs/

bgpd is dying on 7.3

Hi, I have a pair of CARPed firewalls which have been talking BGP to two upstream ISPs for years over numerous OpenBSD releases. After I upgraded to 7.3 a few days ago, as well as applied 001_bgpd errata patch, I noticed bgpd died on both CARP members almost at the same time, leaving my AS inacce

Re: bgpd is dying on 7.3

bgpd otherwise worked well, up to the point where it didn't. Should you need any further information from affected boxes I'd be more than glad to provide it. Best regards, -- Before enlightenment - chop wood, draw water. After enlightenment - chop wood, draw water. Marko Cupać https://www.mimar.rs/

page fault trap stopped at pipex_close_session

One of my firewalls hanged twice in last 10 days. Anyone willing to help please? Thank you in advance. Console message: uvm_fault(0xd8f5f680, 0x0, 0, 3) -> e kernel: page fault trap, code=0 Stopped at pipex_close_session+0xc4: movl %eax,0x6c(%exc) ddb{3}> dmesg: OpenBSD 5.3 (GENERIC.MP) #5

Re: page fault trap stopped at pipex_close_session

On Thu, 4 Jul 2013 11:32:08 +0100 Stuart Henderson wrote: > On 2013/07/04 10:47, Marko Cupać wrote: > > One of my firewalls hanged twice in last 10 days. Anyone willing to > > help please? Thank you in advance. > > > > Console message: > > > > uvm_fault

Re: page fault trap stopped at pipex_close_session

I was instructed on misc list by Yasuoka to upgrade to latest snapshot, so I did it: OpenBSD 5.3-current (GENERIC.MP) #25: Sat Jul 6 17:01:33 MDT 2013 Thank you for your help, let's see if it fixes the problem. -- Marko Cupać

Re: page fault trap stopped at pipex_close_session

On Mon, 8 Jul 2013 11:49:09 +0200 Marko Cupać wrote: > I was instructed on misc list by Yasuoka to upgrade to latest snapshot, so I > did it: > OpenBSD 5.3-current (GENERIC.MP) #25: Sat Jul 6 17:01:33 MDT 2013 No hangs since upgrade. Thank you for your help. -- Marko Cupać