Hello, I recently posted on misc regarding a kernel crash on a freshly installed 6.3 system on my laptop but did not get any replies. I am submitting this bug report as perhaps this is where I should have sent the information in the first place.
I'm currently running Windows 10 on an HP ZBook 15 G4 and I am trying to install OpenBSD 6.3 to a USB key so that I can boot it on this laptop during times when I need something better than Windows for network troubleshooting (such as proper VLAN support). Unfortunately, while the install goes well I am unable to properly boot from the key. Here's a summary of what I did: 1. dd 'install63.fs' to a USB key. 2. Boot laptop from key. No problems here. 3. Run the installer and install to a second, connected USB key using the 'whole disk (G)PT' option at the partitioning step. 4. Reboot and try to boot from the newly-installed key. 5. While a lot of "acpitzX" messages are flying by suddenly there is a panic, lots of stuff gets written to the screen, and then I arrive at the 'ddb>' prompt. ["show panic": https://photos.app.goo.gl/zQWndK7iaT9kmtvg2] ["trace": https://photos.app.goo.gl/qImUruDyOEhVsIlw2] ["mach ddbcpu 1" (just hangs): https://photos.app.goo.gl/4B5OATBZowLRH1PH2] 6. If I boot again and disable ACPI from the kernel config then the panic doesn't occur, but many "uhubX: device problem, disabling port X" lines eventually appear in succession, and the boot process suddenly stops at "scsibus4 at softraid0: 256 targets" and stays there forever. [picture: https://photos.app.goo.gl/UofCs4satxYFXAS03] Since the key with 'install63.fs' booted just fine I'm pretty sure there's a way I can get OpenBSD to boot on this laptop, but I don't know the differences between the kernel used during install and the "normal" kernel so I don't know why the normal one has issues. Thanks, -Martin P.S. Since I cannot get the installed kernel to load properly I can obviously not run dmesg, but here is the output of 'dmesg' as run from the installer USB key shell in case it helps: OpenBSD 6.3 (RAMDISK_CD) #98: Sat Mar 24 14:26:39 MDT 2018 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD real mem = 34258653184 (32671MB) avail mem = 33216593920 (31677MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 3.0 @ 0x8d764000 (35 entries) bios0: vendor HP version "P70 Ver. 01.18" date 03/20/2018 bios0: HP HP ZBook 15 G4 acpi0 at bios0: rev 2 acpi0: tables DSDT FACP SSDT UEFI SSDT TPM2 SSDT SSDT SSDT MSDM SLIC WSMT HPET APIC MCFG SSDT SSDT SSDT SSDT SSDT SSDT SSDT DBGP DBG2 DMAR NHLT SSDT ASF! FPDT BGRT SSDT acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i7-7700HQ CPU @ 2.80GHz, 2694.76 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,D \ S,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSS \ E3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE, \ AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AV \ X2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN cpu0: 256KB 64b/line 8-way L2 cache cpu0: apic clock running at 23MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PEG1) acpiprt2 at acpi0: bus -1 (PEG2) acpiprt3 at acpi0: bus 1 (PEG0) acpiprt4 at acpi0: bus 2 (RP01) acpiprt5 at acpi0: bus 3 (RP02) acpiprt6 at acpi0: bus -1 (RP03) acpiprt7 at acpi0: bus -1 (RP04) acpiprt8 at acpi0: bus 4 (RP05) acpiprt9 at acpi0: bus -1 (RP06) acpiprt10 at acpi0: bus -1 (RP07) acpiprt11 at acpi0: bus -1 (RP08) acpiprt12 at acpi0: bus 111 (RP09) acpiprt13 at acpi0: bus -1 (RP10) acpiprt14 at acpi0: bus -1 (RP11) acpiprt15 at acpi0: bus -1 (RP12) acpiprt16 at acpi0: bus -1 (RP13) acpiprt17 at acpi0: bus -1 (RP14) acpiprt18 at acpi0: bus -1 (RP15) acpiprt19 at acpi0: bus -1 (RP16) acpiprt20 at acpi0: bus -1 (RP17) acpiprt21 at acpi0: bus -1 (RP18) acpiprt22 at acpi0: bus -1 (RP19) acpiprt23 at acpi0: bus -1 (RP20) acpiprt24 at acpi0: bus -1 (RP21) acpiprt25 at acpi0: bus -1 (RP22) acpiprt26 at acpi0: bus -1 (RP23) acpiprt27 at acpi0: bus -1 (RP24) acpiec0 at acpi0 acpicpu at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpipwrres at acpi0 not configured acpitz at acpi0 not configured acpitz at acpi0 not configured acpitz at acpi0 not configured acpitz at acpi0 not configured acpitz at acpi0 not configured acpitz at acpi0 not configured acpitz at acpi0 not configured acpitz at acpi0 not configured acpitz at acpi0 not configured "PNP0C14" at acpi0 not configured "PNP0C14" at acpi0 not configured "HPQ6007" at acpi0 not configured "INT3F0D" at acpi0 not configured "HPQ8002" at acpi0 not configured "SYN305A" at acpi0 not configured "PNP0C14" at acpi0 not configured "PNP0C0A" at acpi0 not configured "ACPI0003" at acpi0 not configured "PNP0C0E" at acpi0 not configured "PNP0C0D" at acpi0 not configured "PNP0C14" at acpi0 not configured "PNP0C14" at acpi0 not configured "HPQ6001" at acpi0 not configured "MSFT0101" at acpi0 not configured "INT340E" at acpi0 not configured pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x5910 rev 0x05 ppb0 at pci0 dev 1 function 0 "Intel Core 6G PCIE" rev 0x05: msi pci1 at ppb0 bus 1 1:0:0: mem address conflict 0xfff80000/0x80000 vendor "NVIDIA", unknown product 0x13b6 (class display subclass VGA, rev 0xa2) at pci1 dev 0 function 0 not configured xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x31: msi usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 "Intel 100 Series Thermal" rev 0x31 at pci0 dev 20 function 2 not configured "Intel 100 Series MEI" rev 0x31 at pci0 dev 22 function 0 not configured ahci0 at pci0 dev 23 function 0 "Intel 100 Series AHCI" rev 0x31: msi, AHCI 1.3.1 ahci0: PHY offline on port 1 ahci0: PHY offline on port 3 scsibus0 at ahci0: 32 targets ppb1 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi pci2 at ppb1 bus 2 iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless-AC 8265" rev 0x78, msi ppb2 at pci0 dev 28 function 1 "Intel 100 Series PCIE" rev 0xf1: msi pci3 at ppb2 bus 3 rtsx0 at pci3 dev 0 function 0 "Realtek RTS525A Card Reader" rev 0x01: msi sdmmc0 at rtsx0: 4-bit, dma ppb3 at pci0 dev 28 function 4 "Intel 100 Series PCIE" rev 0xf1: msi pci4 at ppb3 bus 4 ppb4 at pci4 dev 0 function 0 "Intel JHL6540 Thunderbolt" rev 0x02 pci5 at ppb4 bus 5 ppb5 at pci5 dev 0 function 0 "Intel JHL6540 Thunderbolt" rev 0x02: msi pci6 at ppb5 bus 6 "Intel JHL6540 Thunderbolt" rev 0x02 at pci6 dev 0 function 0 not configured ppb6 at pci5 dev 1 function 0 "Intel JHL6540 Thunderbolt" rev 0x02: msi pci7 at ppb6 bus 7 ppb7 at pci5 dev 2 function 0 "Intel JHL6540 Thunderbolt" rev 0x02: msi pci8 at ppb7 bus 58 ppb8 at pci5 dev 4 function 0 "Intel JHL6540 Thunderbolt" rev 0x02: msi pci9 at ppb8 bus 59 ppb9 at pci9 dev 0 function 0 vendor "Intel", unknown product 0x1578 rev 0x00 pci10 at ppb9 bus 60 ppb10 at pci10 dev 0 function 0 vendor "Intel", unknown product 0x1578 rev 0x00: msi pci11 at ppb10 bus 61 xhci1 at pci11 dev 0 function 0 "ASMedia ASM1042A xHCI" rev 0x00: msi usb1 at xhci1: USB revision 3.0 uhub1 at usb1 configuration 1 interface 0 "ASMedia xHCI root hub" rev 3.00/1.00 addr 1 ppb11 at pci10 dev 1 function 0 vendor "Intel", unknown product 0x1578 rev 0x00: msi pci12 at ppb11 bus 62 bge0 at pci12 dev 0 function 0 "Broadcom BCM57762" rev 0x01, unknown BCM57766 (0x57766001): msi, address 3c:52:82:e7:ce:c7 brgphy0 at bge0 phy 1: BCM57765 10/100/1000baseT PHY, rev. 1 ppb12 at pci10 dev 2 function 0 vendor "Intel", unknown product 0x1578 rev 0x00: msi pci13 at ppb12 bus 63 ppb13 at pci10 dev 3 function 0 vendor "Intel", unknown product 0x1578 rev 0x00: msi pci14 at ppb13 bus 64 ppb14 at pci10 dev 4 function 0 vendor "Intel", unknown product 0x1578 rev 0x00: msi pci15 at ppb14 bus 65 ppb15 at pci0 dev 29 function 0 "Intel 100 Series PCIE" rev 0xf1: msi pci16 at ppb15 bus 111 nvme0 at pci16 dev 0 function 0 "Samsung SM961/PM961 NVMe" rev 0x00: msi, NVMe 1.2 nvme0: SAMSUNG MZVKW512HMJP-000H1, firmware CXA74H0Q, serial S34CNX0J903575 scsibus1 at nvme0: 1 targets sd0 at scsibus1 targ 0 lun 0: <NVMe, SAMSUNG MZVKW512, CXA7> SCSI4 0/direct fixed sd0: 488386MB, 512 bytes/sector, 1000215216 sectors vendor "Intel", unknown product 0xa154 (class bridge subclass ISA, rev 0x31) at pci0 dev 31 function 0 not configured "Intel 100 Series PMC" rev 0x31 at pci0 dev 31 function 2 not configured vendor "Intel", unknown product 0xa171 (class multimedia subclass hdaudio, rev 0x31) at pci0 dev 31 function 3 not configured "Intel 100 Series SMBus" rev 0x31 at pci0 dev 31 function 4 not configured em0 at pci0 dev 31 function 6 "Intel I219-LM" rev 0x31: msi, address 3c:52:82:ea:55:b5 isa0 at mainbus0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard efifb0 at mainbus0: 1024x768, 32bpp wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using wskbd0 umass0 at uhub0 port 1 configuration 1 interface 0 "LEXAR MEDIA JUMPDRIVE SPORT" rev 2.00/30.00 addr 2 umass0: using SCSI over Bulk-Only scsibus2 at umass0: 2 targets, initiator 0 sd1 at scsibus2 targ 1 lun 0: <LEXAR, JUMPDRIVE SPORT, 1000> SCSI0 0/direct removable serial.05dca410032124011204 sd1: 991MB, 512 bytes/sector, 2030592 sectors uhidev0 at uhub0 port 4 configuration 1 interface 0 "Logitech USB Receiver" rev 2.00/24.01 addr 3 uhidev0: iclass 3/1 ukbd0 at uhidev0 wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub0 port 4 configuration 1 interface 1 "Logitech USB Receiver" rev 2.00/24.01 addr 3 uhidev1: iclass 3/1, 8 report ids uhid at uhidev1 reportid 2 not configured uhid at uhidev1 reportid 3 not configured uhid at uhidev1 reportid 4 not configured uhid at uhidev1 reportid 8 not configured uhidev2 at uhub0 port 4 configuration 1 interface 2 "Logitech USB Receiver" rev 2.00/24.01 addr 3 uhidev2: iclass 3/0, 33 report ids uhid at uhidev2 reportid 16 not configured uhid at uhidev2 reportid 17 not configured uhid at uhidev2 reportid 32 not configured uhid at uhidev2 reportid 33 not configured "Generic HP HD Camera" rev 2.00/90.04 addr 4 at uhub0 port 7 not configured "vendor 0x138a product 0x003f" rev 1.10/1.04 addr 5 at uhub0 port 8 not configured "vendor 0x8087 product 0x0a2b" rev 2.00/0.10 addr 6 at uhub0 port 12 not configured uhub2 at uhub1 port 1 configuration 1 interface 0 "Asmedia ASM107x" rev 3.00/0.01 addr 2 uhub3 at uhub1 port 3 configuration 1 interface 0 "Asmedia ASM107x" rev 2.10/0.01 addr 3 uhub4 at uhub3 port 3 configuration 1 interface 0 "VIA Labs, Inc. USB2.0 Hub" rev 2.10/90.90 addr 4 uhidev3 at uhub1 port 4 configuration 1 interface 3 "HP HP Dock Audio" rev 2.00/3.04 addr 5 uhidev3: iclass 3/0, 7 report ids uhid at uhidev3 reportid 1 not configured uhid at uhidev3 reportid 2 not configured uhid at uhidev3 reportid 3 not configured uhid at uhidev3 reportid 4 not configured uhid at uhidev3 reportid 5 not configured uhid at uhidev3 reportid 6 not configured uhid at uhidev3 reportid 7 not configured "HP HP Dock Audio" rev 2.00/3.04 addr 5 at uhub1 port 4 configuration 1 not configured softraid0 at root scsibus3 at softraid0: 256 targets root on rd0a swap on rd0b dump on rd0b iwm0: could not read firmware iwm-8265-22 (error 2) iwm0: failed to load init firmware uhub4 detached
