Hi Ioana, all
It turns out I was trying to use more BRAM's than we had payed for (well,
my design was nice and simple, except I had put two huge snaps. Once I
decreased the size of one, no problem)
I didn't expect the error message to take this form though
I'm not sure that these
We use both simultaneously quite reliably on KAT-7. I'm not aware of any
issues.
Have you tried another ROACH board?
Yes, three different ones exhibit the same problem. Here's the library we
have:
Yes, Master1017 git describe --always
last_ibob_bee2_support-87-g29edeea
Yes, Master1018 git
Hi, John,
On Jun 3, 2013, at 6:03 AM, John Ford wrote:
We use both simultaneously quite reliably on KAT-7. I'm not aware of any
issues.
Have you tried another ROACH board?
Yes, three different ones exhibit the same problem. Here's the library we
have:
Yes, Master1017 git describe
Hi, John,
On Jun 3, 2013, at 6:03 AM, John Ford wrote:
We use both simultaneously quite reliably on KAT-7. I'm not aware of
any
issues.
Have you tried another ROACH board?
Yes, three different ones exhibit the same problem. Here's the library
we
have:
Yes, Master1017 git describe
The only thing more complicated than the casper tools is git. :)
Haha! Quotable-quote! Where's that wiki page...
hi tim,
what is your IF board.
who made it?
is it a casper open source board?
best wishes,
dan
On Mon, Jun 3, 2013 at 1:08 PM, Timothy Madden tmad...@aps.anl.gov wrote:
My IF board stopped working. The regulator U53 at the power input
connector (6V) was hot and had failed.
I will
casper posting from rick raffanti:
-- Forwarded message --
From: Rick Raffanti rik...@techneinstruments.com
Date: Mon, Jun 3, 2013 at 3:32 PM
Subject: Re: [casper] IF Board - Bad Regulator- U51
Dan and all,
That's the MKID Intermediate Frequency board. Tim points out correctly
7 matches
Mail list logo