Jeremy
You have enabled VPN on Loopback0 (7.7.53.3) but you say that your trigger
ACL is sourced off 33.33.33.33. So what is the traffic you are trying to
protect here?
Regards,
--
Piotr Kaluzny
CCIE #25665 (Security), CCSP, CCNP
Sr. Technical Instructor - IPexpert, Inc.
URL:
that was the wrong one Iput here,
the actual one that is configured is
access-list 101 permit ip host 7.7.53.3 host 192.168.6.1
On Tue, Nov 5, 2013 at 2:06 AM, Piotr Kaluzny pio...@ipexpert.com wrote:
Jeremy
You have enabled VPN on Loopback0 (7.7.53.3) but you say that your trigger
ACL is
Either we are both Doing it wrong, or it just doesnt trigger
I tried my configuration using a the loopback as the trigger (did not work)
and then added a new interface (fa0/1) put a host there and add the host for
trigger the ACL and it worked fine.
This is triggered on the debug IP packet
*7.7.53.3R3-R6- 192.168.6.1*
*R6 is the server and R3 is the client.*
Manual mode work. so config is good.but if I try the following it fails and
Im not sure if this how it should.be
*Desire beahvior:* If I ping from Lo on R3 to 92.168.6.1, it trigger the
tunnel only when it sees
