[OSL | CCIE_Voice] SIP Firmware for 7940-7960 for CCME 4.1.02

Hi , i am struggling to find the sip firmware files for 7940-7960 for CCME . Though i have downloaded cme-full-4.1.0.2 , but coudl'nt dinf the sip firmware files.. Can somebody help me out ... Thanks Anupam ___ For more information regarding industry l

Re: [OSL | CCIE_Voice] Ver 3 passed

tipl...@cisco.com The more we send these in and the more times he posts, the (hopefully) better the chance of Cisco shutting these places down. Besides, it shows that some people care and it's stress relief. It's useless to the cause to post but we feel better. I feel

Re: [OSL | CCIE_Voice] Choosing the right ISR?

Nice find Andrew. There's even a defnintion for MGCP for it in CallManager 7. Only problem is (where I agree with Thomas's design) is single point of failure. But so is his mux. Put the two 3845's in different locations and you have some distributed redundancy and no worries about digging up

Re: [OSL | CCIE_Voice] CUE Setup - Bandwidth Hog?

Was this all you had in there or was there a defined class/policy? FRTS defaults to 56k if undefined. Try putting it back on and typing "show traf" to see. On Fri, Sep 25, 2009 at 8:44 PM, Aamir Panjwani < aamir.panjw...@ivision.com.au> wrote: > Dave, > > > > Are you saying that you had to

Re: [OSL | CCIE_Voice] Ver 3 passed

Instead of replying to this person and giving them recognition (something about no such thing as bad publicity...) why not, ignore them, and make sure their message is deleted from the list archives. On Fri, Sep 25, 2009 at 9:35 PM, Thomas Koch wrote: > Mike, > > You’re probably correct…IDOTS l

Re: [OSL | CCIE_Voice] Ver 3 passed

Mike, You're probably correct.IDOTS like this are why the V2 CCIE lab was a ##$#$ #$#$er according to a friend of mine who passed about a 2 years ago. Thomas J Koch Owner/Consultant CCNA, CCVP Digitones, LLC Cell: 630-808-4910 E-mail: digito...@comcast.net _ From: Mike Thompson

Re: [OSL | CCIE_Voice] Ver 3 passed

Doubt it. he's in a shack in the hills of India peddling his cheat sheets. That's where a few of those places are based (there or Pakistan). For those of you pushing that sh#&, please do it somewhere else. We know it's out there, it that's how we wanted to pass, we'll call you. if we don't,

Re: [OSL | CCIE_Voice] Ver 3 passed

I'm with Mike.I hope he's in the Chicago market.. Thomas J Koch Owner/Consultant Digitones, LLC Cell: 630-808-4910 E-mail: digito...@comcast.net _ From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Mike Thompson Sent: Friday, Sep

Re: [OSL | CCIE_Voice] Ver 3 passed

Wayne.can you just tell us where this guy comes from and we'll go shut him up ourselves? From: voice master [mailto:voicemaster2...@hotmail.com] Sent: Friday, September 25, 2009 3:26 PM To: j...@cia.net; groupst...@ipexpert.com Cc: ccie_voice@onlinestudylist.com; mthompson...@gmail.com Subject

Re: [OSL | CCIE_Voice] CUE Setup - Bandwidth Hog?

Dave, Are you saying that you had to remove "frame-relay traffic shaping" command from the physical interface? thanks From: Cisco Dave [mailto:ciscod...@live.com] Sent: Saturday, 26 September 2009 8:07 AM To: Aamir Panjwani; ccie_voice@onlinestudylist.com Subject: RE: [OSL | CCIE_Vo

Re: [OSL | CCIE_Voice] V3 voice DVD

Sorry all, It was a problem with my DVD rom. On Fri, Sep 25, 2009 at 4:56 PM, Craig Staffin wrote: > The DVD is a DL DVD. Not all devices can read these. > > My laptop even it can burn them can not read this DVD. However my desktop > can. > > Either way the quality of the new VOD is pathetic com

Re: [OSL | CCIE_Voice] Choosing the right ISR?

A 3800 with 18 voice t1s at any sort of decent cps or with any sort of additional overhead per-call such as a tcl script or similar would likely poo itself faster than your average newborn. -Pete On Fri, Sep 25, 2009 at 2:54 PM, Matthew Berry wrote: > Ok, so I am reviewing the interoperabilit

Re: [OSL | CCIE_Voice] Lab score report

I took mine Wednesday and got the results the next day at about 3:00PM. Can someone confirm where the 4 open ended questions are scored? Thanks, cd > Date: Fri, 25 Sep 2009 11:30:32 +0200 > From: pgciscov...@gmx.net > To: kevin.dami...@vitalsite.com > CC: ccie_voice@onlinestudylist.com

Re: [OSL | CCIE_Voice] CUE Setup - Bandwidth Hog?

I put a base config on both routers and ended up with the same situation. After a closer look I noticed a shaping command on the HQ router. All is working great after removing that statement. Thanks for pointing me in the right direction, cd Subject: RE: [OSL | CCIE_Voice] CUE Setup -

Re: [OSL | CCIE_Voice] V3 voice DVD

It is a regular video DVD... throw it in your DVD player or launch DVD software... On Fri, Sep 25, 2009 at 4:20 PM, J Hogan wrote: > Hello > >   I receive my Update DVD. but when I put it in my cd/dvd rom I dont see > anything? it there anything I need to do? is there a special software or > some

[OSL | CCIE_Voice] V3 voice DVD

Hello I receive my Update DVD. but when I put it in my cd/dvd rom I dont see anything? it there anything I need to do? is there a special software or something? -- J. Hogan MCP,CCDA,CCDP, CCNA, CCNP, CCSP, CCAI Yahoo ID: jhogan552000 AIM ID: jhogan55 MSN ID: jhogan55 ICQ ID: 257599283 Live Li

Re: [OSL | CCIE_Voice] Choosing the right ISR?

Man, That's slick.I wish that was an option about 2 years ago when we did our data center. I had a DS-3 worth of T1's for Meeting Place. I ended up with (2) 3845's fully decked out.plus an Adtran M13 mux. Thomas J Koch Owner/Consultant Digitones, LLC Cell: 630-808-4910 E-mail: digito...@

Re: [OSL | CCIE_Voice] Choosing the right ISR?

VGD-1T3http://www.cisco.com/en/US/prod/collateral/iad/vgd1t3_ds.pdf Andrew On Fri, Sep 25, 2009 at 3:24 PM, Michael Ciarfello wrote: > As far as I know, Cisco cannot use any DS3’s for T1 / PRI for voice. > That is a data T3. > > > > *From:* ccie_voice-boun...@onlinestudylist.com [mailto: > cci

Re: [OSL | CCIE_Voice] Choosing the right ISR?

As far as I know, Cisco cannot use any DS3's for T1 / PRI for voice. That is a data T3. From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Matthew Berry Sent: Friday, September 25, 2009 2:54 PM To: ccie_voice@onlinestudylist.com Subject: Re

Re: [OSL | CCIE_Voice] Lab score report

Depends where you take it... If RTP, I had my results by 0930 CST. If SJ, it was 6PM CST Jonathan On Thu, Sep 24, 2009 at 6:26 AM, Brian Valentine wrote: > All, > > > > I believe that for the R&S labs, they are graded by proctors at another > location, and therefore, another time-zone.  So, s

Re: [OSL | CCIE_Voice] Choosing the right ISR?

Ok, so I am reviewing the interoperability guide and on page 15 I see that a 3845 can handle 450 DS0s (18.75 DS1s) at 75-percent platform CPU usage. However, isn't a T3 672 DS0s? If that's the case, I don't see any ISRs that should be able to support a T3. Of course, I think I'm wrong in that ass

Re: [OSL | CCIE_Voice] october lab dates

Way to go Phil. I thniik that's what metter with CCIE non-stop pursuance.and one fine day number wlll be yours. Enjoy your journey. --- On Fri, 9/25/09, Phil G wrote: From: Phil G Subject: Re: [OSL | CCIE_Voice] october lab dates To: "Mick Vaites" Cc: "CCIE Voice Maillist" Date: Fri

Re: [OSL | CCIE_Voice] help configure vg202 with sccp router side

Try Cisco netpro (www.cisco.com/go/netpro) (or Cisco TAC). Although we should be able to help you, no one has answered so you might want to pursue other means. I personally haven't used the new VG20x's yet. From: ccie_voice-boun...@onlinestudylist.com [mailto:

Re: [OSL | CCIE_Voice] help configure vg202 with sccp router side

Dear All, can anyone help me configure vg202 i've configure vg202 with protocol mgcp vg202 is work fine in the headquarter, but problem when is in the remote site. the configuration is the same. then i change to sccp, but the problem still occur still the same. problem is some, the vg cannot acce

[OSL | CCIE_Voice] CUBE ringback problem

Situation: PSTN originator gets no ringback on calls when they are being transfered from Unity to ip phone. Topology: PSTN---Verizon---(sip)---CUBE---(h323)---CM_6---Unity I get ringback when I initially call in, just not on transfer. The CUBE is doing transcoding from g711 to g729 on box (us

Re: [OSL | CCIE_Voice] TEHO-- Using globalised route pattern-Volume2 lab4

Phil, That depends on ur called party mask. If you set it up for only 7 digit it will show only 7 digits. Cheers NK -Original Message- From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Phil G Sent: Friday, 25 September 2009 7:59 PM

Re: [OSL | CCIE_Voice] TEHO-- Using globalised route pattern-Volume2 lab4

Do you really see the 7 digit number or the 7digit number with the leading 9? (I am asking because i am searching for an answer how i can configure the system so that i only see the 7D without the leading nine) Kumar, Narinder wrote: > Yes I do have separate TEHO translation pattern. But the pr

Re: [OSL | CCIE_Voice] Lab score report

I got my report on next business day at 6pm. Kevin Damisch wrote: > When you take a voice lab, the proctor grades it either the same day or next > day at the same site using the seat you sat in and does test calls. On my > first voice attempt, I got my results the next day around 2:00pm. On my

Re: [OSL | CCIE_Voice] CUE Setup - Bandwidth Hog?

I have the same issue every time i do the CUE-setup. At this stage i have never made any QOS config. Aamir Panjwani wrote: > It seems to happen when you have QOS setup on one of the PVC’s. remove > all the QOS config and try again > > > > *From:* ccie_voice-boun...@onlinestudylist.com > [m

Re: [OSL | CCIE_Voice] mgcp ccm-manger config server

Ben Ng has confirmed some things on Networkers. These confirmations are on the IPExpert Blog. My hint: Do not believe everything. Aamir Panjwani wrote: > I was watching gateway video in new voice VOD today, Mark Snow mentioned > that Ben Ng at networkers has publicly said that new voice lab will

Re: [OSL | CCIE_Voice] october lab dates

I agree. I did my very first attempt on 14th of January this year and was very upset that i got no more date for the v2-lab. First i wanted to quit studying for this year, but then i made a v3-attempt in August in Brussels, with not much preparation due to vacation time and a lot of work to do.