Hi everyone,
The IPMA / CTI Route Point seem to be setup as per the lab 9a. However
although the route point do not register. Restarted all servers and
CTIManager but nothing changes
I've been looking through the CTI trace logs, but nothing stands out
Any tips on what to try/test please ?
--
It should show as unregistered with an IP address next to it (if you are
in the CTI Route Point Find screen). Do you have the IP address? If so, it
is all good.
On Thu, Apr 22, 2010 at 7:31 PM, Mad Kiwi ccievoi...@gmail.com wrote:
Hi everyone,
The IPMA / CTI Route Point seem to be setup as
I take that back. I was comparing it to my current CM/CUE lab which I forgot
was in SRST mode... My bad.
On Thu, Apr 22, 2010 at 7:48 PM, Roger Henderson rhender...@gmail.comwrote:
It should show as unregistered with an IP address next to it (if you are
in the CTI Route Point Find screen). Do
Hi:
Did you add the cti route point at ipma service parameter?
You have to do it at both pub and sub server becouse this parameter is not
clusterwide and apply only to one server
hth
Date: Thu, 22 Apr 2010 19:31:55 +1000
From: ccievoi...@gmail.com
To:
Hi,
Yes I have added the cti route point in the ipma service parameter, on both
servers.
Regards
kiwi
On Thu, Apr 22, 2010 at 8:22 PM, Angel Perez gorr...@hotmail.com wrote:
Hi:
Did you add the cti route point at ipma service parameter?
You have to do it at both pub and sub server
Does anyone know where I would create the AXL user in CUCME for an
integration with UCCX?
I'm guessing that it would be a typical username: username axl-user
password IamTired?
--
*Matthew Berry*
/A+, CCENT, CCNA, CCNA Voice, CCVP, CCIE Voice Written/
*_Vitals:_*
*GVoice:
It's possiblebut you'll have to change the way in which you provide the 1
for customer support and the option to dial-by-extension since your extensions
begin with 1 as well. Just a bit like building an algorithm.think it out
clearly first.
Please see the following link for the CCX
I fat fingered my CLI administration account for Unity Conn 7. I can access CUC
administration VIA Web portal but that is it.
Does anyone have a CLI PW recovery method to share?
Chris
On Apr 20, 2010, at 8:52 PM, Omotayo wrote:
Hello,
I usually have issue logging into the CUE via GUI.
It's been forever since I've done anything with CM+UCCX but I believe its:
xml user user-name password password privilege-level 15
On Thu, Apr 22, 2010 at 6:51 AM, Matthew Berry ciscovoiceg...@gmail.com wrote:
Does anyone know where I would create the AXL user in CUCME for an
integration with
err, s/CM/CME
On Thu, Apr 22, 2010 at 8:38 AM, Tanner Ezell tanner.ez...@gmail.com wrote:
It's been forever since I've done anything with CM+UCCX but I believe its:
xml user user-name password password privilege-level 15
On Thu, Apr 22, 2010 at 6:51 AM, Matthew Berry
Also I should clarify, that is under 'telephony-service'.
On Thu, Apr 22, 2010 at 8:38 AM, Tanner Ezell tanner.ez...@gmail.com wrote:
It's been forever since I've done anything with CM+UCCX but I believe its:
xml user user-name password password privilege-level 15
On Thu, Apr 22, 2010 at
https://supportforums.cisco.com/thread/296857
Thanks
MikeN
On Thu, Apr 22, 2010 at 6:06 AM, bontacommunications
bontacommunicati...@gmail.com wrote:
I fat fingered my CLI administration account for Unity Conn 7. I can access
CUC administration VIA Web portal but that is it.
Does anyone
been looking through the CTI trace logs, but nothing stands out
Any tips on what to try/test please ?
--
Cheers,
kiwi
-- next part --
An HTML attachment was scrubbed...
URL:
http://onlinestudylist.com/pipermail/ccie_voice/attachments/20100422/f7cc4b6a
There is a huge number of posts on this, and explanations are all over the
board. Trying to get a definitive answer.
When calculating the size of LLQ AND utilizing FRF.12. Is the Layer 2 overhead
4 bytes for Frame Relay or 8 Bytes.
SRND states 8 Solution Guides appear to use 4 or 7. One
thank you.
On Apr 22, 2010, at 10:10 AM, miken miken wrote:
https://supportforums.cisco.com/thread/296857
Thanks
MikeN
On Thu, Apr 22, 2010 at 6:06 AM, bontacommunications
bontacommunicati...@gmail.com wrote:
I fat fingered my CLI administration account for Unity Conn 7. I can access
://onlinestudylist.com/pipermail/ccie_voice/attachments/20100422/0e397ed1/attachment-0001.htm
--
Message: 2
Date: Thu, 22 Apr 2010 10:30:29 -0400
From: bontacommunications bontacommunicati...@gmail.com
Subject: Re: [OSL | CCIE_Voice] Help login into CUC via CLI
To: miken miken
?
--
Cheers,
kiwi
-- next part --
An HTML attachment was scrubbed...
URL:
http://onlinestudylist.com/pipermail/ccie_voice/attachments/20100422/f7cc4b6a/attachment-0001.htm
--
Message: 2
Date: Thu, 22 Apr 2010 19:48:55
cBarge on CME -
- eph-dn octoline
- conf hardware in telephony service
- privacy off on ephone to be bacrged into
- ephon-temp remote-in-use to have cBArge key
- apply eph-temp to eph
Error message says message Failed to setup barge
___
For more
logs, but nothing stands out
Any tips on what to try/test please ?
--
Cheers,
kiwi
-- next part --
An HTML attachment was scrubbed...
URL:
http://onlinestudylist.com/pipermail/ccie_voice/attachments/20100422/f7cc4b6a/attachment-0001.htm
You also need to configure some ad-hoc conference ephone-dn(s). Then
this should work.
Jeff
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of vccie2010
Sent: Thursday, April 22, 2010 8:29 AM
To: ccie_voice@onlinestudylist.com
please ?
--
Cheers,
kiwi
-- next part --
An HTML attachment was scrubbed...
URL:
http://onlinestudylist.com/pipermail/ccie_voice/attachments/20100422/f7cc4b6
a/attachment-0001.htm
--
Message: 2
Date: Thu, 22 Apr 2010 19:48:55
Jeff, I tried with that too but no luck.
On Thu, Apr 22, 2010 at 9:01 AM, Jeff Price (jeffpric)
jeffp...@cisco.comwrote:
You also need to configure some ad-hoc conference ephone-dn(s). Then
this should work.
Jeff
*From:* ccie_voice-boun...@onlinestudylist.com [mailto:
SDSPfarm registered?
On Thu, Apr 22, 2010 at 11:24 AM, vccie2010 vccie2...@gmail.com wrote:
Jeff, I tried with that too but no luck.
On Thu, Apr 22, 2010 at 9:01 AM, Jeff Price (jeffpric) jeffp...@cisco.com
wrote:
You also need to configure some ad-hoc conference ephone-dn(s). Then this
Hi guys,
I am just starting my lab prep, and I am at lab 1A.
When a port is combined with both voice and data, do we need to manually set
port speed and duplex(i.e., 10/half) for the exam?
Thank you,
Bo
___
For more information regarding industry
For the exam, no. All routing is pre-configured and if there is any
issues you need to get the proctor involved.
Jeff
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Bo Gao
Sent: Thursday, April 22, 2010 10:51 AM
To:
Kevin,
I had this problem yesterday sending calls through my H323 gateway. It
turned out to be related to the IP Blue softphones which I'll wager you are
using, Kevin as your problem looks mighty similar. With the IP Blue
softphones the LAST softphone to startup will be able to send and receive
Try the table on this URL:
http://www.cisco.com/en/US/tech/tk652/tk698/technologies_tech_note09186a0080094ae2.shtml
Roger
On Fri, Apr 23, 2010 at 12:17 AM, Jeff Cotter jcot...@voxns.com wrote:
There is a huge number of posts on this, and explanations are all over
the board. Trying to get a
All -
Has anyone ever used the Busy and No Answer applications in UCCX? I'm
having a hard time figuring out their real-world use.
Matthew Berry
/A+, CCENT, CCNA, CCNA Voice, CCVP, CCIE Written/
*Gmail:* ciscovoiceguru
*Skype:* ciscovoiceguru
*Twitter:* ciscovoiceguru
*1st Lab Attempt:
yuppI will lab it again and update here.
On Thu, Apr 22, 2010 at 9:53 AM, ccieid1ot ccieid...@gmail.com wrote:
SDSPfarm registered?
On Thu, Apr 22, 2010 at 11:24 AM, vccie2010 vccie2...@gmail.com wrote:
Jeff, I tried with that too but no luck.
On Thu, Apr 22, 2010 at 9:01 AM, Jeff
29 matches
Mail list logo
