What am I missing on this one? As shown in the PG, I have added br2ph2 as an
owner/member of the Broadcasters group and assigned extension 3300 to it? What
else is needed? DN or dial peer? Using a dial peer gives me a busy signal.
Using a DN forwarded to CUE give me there is no mailbox
Hi all
I just got done with Vol 1 Lab 7A, (Media Resources) using PL.
Whenever BR1 phones called HQ phones I would get Network congestion
rerouting and AAR would be invoked, this LAB has nothing to do with AAR
but Ichecked Locations and everything is set to unlimited Bandwidth, I
also
Hi,
for me it can only happen if you use static locations or RSVP locations
(maybe you missed this part on the location configuration page?)
regards
kobel
On Wed, Jul 14, 2010 at 11:03 PM, larry Stern ste...@optonline.net wrote:
Hi all
I just got done with Vol 1 Lab 7A, (Media Resources)
Hi gangs,
I can not seem to get the ephones to register with their assigned
DN's. Tried all types of srst mode auto-pro commands. Someone please
give me a sanity check.
!
telephony-service
sdspfarm units 5
sdspfarm tag 1 SC-CFB
no privacy
conference hardware
srst mode auto-provision none
Is your ip source address on the phones config as the srst? Is that interface
up/up? Ntp status?
- Reply message -
From: ccieid1ot ccieid...@gmail.com
Date: Wed, Jul 14, 2010 6:20 pm
Subject: [OSL | CCIE_Voice] CME SRST Mode
To: ccie_voice@onlinestudylist.com
Yes, ntp is good too. THe phones register but doesn't get any extensions.
On Wed, Jul 14, 2010 at 5:26 PM, bkvalent...@gmail.com
bkvalent...@gmail.com wrote:
Is your ip source address on the phones config as the srst? Is that
interface up/up? Ntp status?
- Reply message -
From:
Have you tried removing the static ephone configuration? They may be picking
that profile which don't have buttons specified.
Thanks
Edwin
Sent from my Verizon Wireless BlackBerry
-Original Message-
From: ccieid1ot ccieid...@gmail.com
Sender: ccie_voice-boun...@onlinestudylist.com
Done that, and phones get nothing.
On Wed, Jul 14, 2010 at 5:51 PM, Edwin Dotson edot...@ams.net wrote:
Have you tried removing the static ephone configuration? They may be picking
that profile which don't have buttons specified.
Thanks
Edwin
Sent from my Verizon Wireless BlackBerry
You have the auto provision mode set to none. You should set to all so that
CME will download the phone's config completely. This is most likely your
problem.
Try and change the command to srst mode auto all and let me know what happens.
-Original Message-
From:
Jeff,
same thing. I had it registered back to CCM then failback to SRST.
ccievoice-sitec#show telephony-service ephone-dn
ephone-dn 4 octo-line
number B16A55 no-reg primary
preference 0 secondary 9
huntstop
huntstop channel 8
call-waiting beep
conference ad-hoc
ephone-dn 10 octo-line
number
srst mode auto-provision none is not a problem if you intend it this
way. However, you must add the buttons to the ephone configuration:
ephone 1
button 1:4
On Wed, Jul 14, 2010 at 4:57 PM, Jeff Price (jeffpric)
jeffp...@cisco.com wrote:
You have the auto provision mode set to none. You should
I have definitely had this problem before, but never really figure out why it
happens.
Try this:
Copy your telephony-service config to Notepad
do a no telephony-service
Register the phones with CUCM again
Paste in your telephony-service config
Bring down the WAN connection.
Eventually the
Good point.
-Original Message-
From: Randall Saborio [mailto:ill2...@gmail.com]
Sent: Wednesday, July 14, 2010 4:10 PM
To: Jeff Price (jeffpric)
Cc: ccieid1ot; Edwin Dotson; ccie_voice@onlinestudylist.com;
ccie_voice-boun...@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] CME SRST
Jeff, tried it you way. Nothing.
ccievoice-sitec#show telephony-service ephone
Number of Configured ephones 0 (Registered 2)
ccievoice-sitec#show telephony-service ephone-dn
ccievoice-sitec#
On Wed, Jul 14, 2010 at 6:12 PM, Jeff Price (jeffpric)
jeffp...@cisco.com wrote:
Good point.
Jeff is correct...whenever I have to make a change to CME SRST config,
especially the ephones, I copy all of my related config to notepad and issue
the no telephony-service command. I then paste everything back in and it
works fine. Don't know if this is a bug or what but it happens every single
Your source address changed from the first post, was it supposed to?
I'm really reach out on a limb here trying to help you b/c your config looks
correct.
I would maybe suggest starting from square one and keep it simple.
Remove all of the commands and only include the srst mode auto all
Phones are sccp in cucm?
Sent from my Verizon Wireless Phone
- Reply message -
From: ccieid1ot ccieid...@gmail.com
Date: Wed, Jul 14, 2010 7:53 pm
Subject: [OSL | CCIE_Voice] CME SRST Mode
To: CCIE Voice ccievoiced...@gmail.com
Cc: ccie_voice@onlinestudylist.com
Ip address changed because I was using fake ones at the beginning of
this email. I have done the simple stuff too, removing the srst
templates and conference hardware etc.
ccievoice-sitec(config)#do sh run | s tele
telephony-service
srst mode auto-provision all
srst dn line-mode octo
Those are all gone.
ccievoice-sitec#sh run | s ephone
max-ephones 10
On Wed, Jul 14, 2010 at 6:56 PM, Randall Saborio ill2...@gmail.com wrote:
Do you still have the ephone 1 and ephone 2 on your config. I think
those shouldn't be there unless you want to assign specific dns to
each.
On
So, I have two phones Br1Ph1 and Br1Ph2 sharing the same DN. Both have the
same softkey template I created called Standard User-CBarge which includes
Remote in Use - CBarge. Both phones are in Device Pool BR1 which includes the
BR1_MRGL which has MRG_BR1_HW_CONF assigned. This MRG contains
20 matches
Mail list logo