[OSL | CCIE_Voice] Hardware VPN

  Hi Experts,   i need assisitance on what device will be the most economical and most appropriate for using IPEXPERT's Hardware VPN.   This is what i think please let me know if its a good idea   1, 800 series router with VPN capabilities   2, POE 12 port switch   3, 3 7965G iP PHONES   I hope i

[OSL | CCIE_Voice] CME SIP to CCM calls disconnects after ringing

Hi, Hi, I have implemented CME 7.0 and have registered both SCCP as well as SIP Phones, this gateway is registered to gatekeeper. Calls from SCCP CME to CUCM is working fine, but when i dial from the CME SIP phones to CCM Phone, it disconnects after ringing and does not allow to answer. I

Re: [OSL | CCIE_Voice] Hardware VPN

I use a cheap 831, IP phones with power bricks setup as daisy chain and it has worked just fine so far. Regards, Roger Carpio. On Thu, Feb 17, 2011 at 8:37 AM, Pithog Oil pithog...@yahoo.com wrote: Hi Experts, i need assisitance on what device will be the most economical and most

Re: [OSL | CCIE_Voice] CME SIP to CCM calls disconnects after ringing

Hello, Don’t forget that your SIP Phones on CME are going to use SIP early offer by default. So check you parameter in CUCM gatekeeper trunk to be sure that it doesn’t wait for TCS capabilities … Regards, Claude Claude Friderich PreSales Support NETCORE PSF S.A. 49 rue du Baerendall

Re: [OSL | CCIE_Voice] CME SIP to CCM calls disconnects after ringing

Probably has something to do with h245 tcs being set. -Original Message- From: vinay kumar jaisvku...@gmail.com Sender: ccie_voice-boun...@onlinestudylist.com Date: Thu, 17 Feb 2011 20:12:34 To: ccie_voice@onlinestudylist.com; ccie_voice-boun...@onlinestudylist.com Subject: [OSL |

[OSL | CCIE_Voice] SIP 7942 don't send presence status (CUCME)

Hi. I have some problems with a basic configuration, but I don't know why my phones don't send presence messages. I have SCCP phone in the same CUCME and works well. I try with some debugs, but I can't saw presence messages from my phones (debug presence all, debug ccsip message). Rtr-C#sh

Re: [OSL | CCIE_Voice] SIP 7942 don't send presence status (CUCME)

Forget it guys, was the dialplan template in the phone.

[OSL | CCIE_Voice] called party transformation pattern

Hi, when needed to dial from the phone directory missed/received calls with globalized numbers For hq phone for example 1.he may find on missed [\+12123941234 (local)] or [\+16173941234 (LD)] or [\+3432141234 (INT)] So if he will call the first, 3941234 should be sent through the gateway

[OSL | CCIE_Voice] calling and called party requirements

Hi, On the exam, If he asked me to let the called party number and type to xx when site 1 call site 2 I'm agree that I must do that But is the above sentence mean anything for the calling party number or type requirements? will i restrict them or modify them ?? thanks