not possible with call-manager-fallback. You still have your 3 party
conference just that you can't configure hardware conferencing. Use
telephony-service SRST
On 13 April 2011 06:00, Erwan Erwan e_er...@yahoo.com wrote:
hi all,
why i can not register my IOS conf with call-manager-fallback ?
Hi ,
We tested with B-ACD in CME . whenever we dial the pilot number call disconnect.
Config
application
service aa flash:app-b-acd-aa-3.0.0.2.tcl
paramspace english index 1
param menu-timeout 1
param dial-by-extension-option 1
param handoff-string aa
paramspace english language en
param voice-mail is mandatory even if you are not sending the call to voice
mail, you can configure a hunt pilot number or dn number
On 13 April 2011 16:35, mgscip gpsvoiceexpe...@yahoo.com wrote:
Hi ,
We tested with B-ACD in CME . whenever we dial the pilot number call
disconnect.
I was hoping you all could help me out with this problem. We had a power
outage this past weekend and prior to this all was working fine. Yesterday
we received reports from out branch offices that they could not make
outbound calls. I had one of the users dial my cellphone number and my
Hi,
Add
service aa flash:app-b-acd-aa-3.0.0.2.tcl
param number-of-hunt-grps 3
and correct the number of hunt group in ACD service (I guess you have 3 not 4)
Hope this will help
Naoufal
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf
Figured it out. Thanks
On Wed, Apr 13, 2011 at 12:04 PM, Bo Gao bga...@gmail.com wrote:
A couple thing I would do:
1) Check if there are missing config on the Gateways, especially your
outbound dial peers; Check the FXO port status; Check the physical line
status;
2) Check CUCM DB Sync;
Just wanted to share this with you guys:
What is the difference between g729r8, g729ar8, g729br8, and g729abr8 ?
The format of the codewords generated by the above 4 codecs are identical.
The g729ar8 is a reduced complexity version of the G.729 speech codec.
It is bit stream interoperable with
Hi All
I converted my 7961 phone to SIP Load for a Lab but am not able to revert
the Phone to SCCP Load. For changing any network settings on the phone, like
TFTP etc, the phone prompts for Authorization with Username Password.
Has anyone faced this issue? Can anyone suggest how should I revert
Hi Experts,
I am able to configure MVA in h323 site but in MGCP I create similar
voip dial-peers and application but it is not working.
In other words how to configure MGCP hairpin in order to MVA to work.
Thanks in advance
Shrini
___
For more
Hi All
I got it working. Had to reconfigure SIP Registrar register the phone ot
it. Then with username password assigned to the phone, I could change the
network settings. Though the phone kept on showing the administrator
username only.
Good day.
Mann
They are modular router but will work.
26xxXM
NM-HD-2VE ( it has builtin PVDMs)
VWIC-2MFT-T1 or 1MFT based on your site requirement.
VWIC-2MFT-E1
Or also you can use VWIC-1MFT-E1/T1
For framerelay:
NM-4T (on PSTN router)
NM-1T on Site routers
Serial cables - 3
VWIC-4ESW - 2
3750 Switch
On
Auto register it to CUCM.
On Wed, Apr 13, 2011 at 9:24 PM, Mann Chaddha mann.chad...@gmail.comwrote:
Hi All
I converted my 7961 phone to SIP Load for a Lab but am not able to revert
the Phone to SCCP Load. For changing any network settings on the phone, like
TFTP etc, the phone prompts for
Select unlock key use password cisco
OR
Connect to Callmanager with dhcp enabled (router dhcp is also ok) by
pressing # key when you see orange row lights on phone button dial
123456789*0# in sequence and relax.
On 4/13/2011 9:24 PM, Mann Chaddha wrote:
Hi All
I converted my 7961 phone to
The simplest way is to create the phones in CUCM, choose SCCP as the
protocol, have your dhcp tftp settings set as the CUCM IP. Go to settings
and type **# and erase the configs to force the phone to acquire new
settings.
On 14 April 2011 07:24, Mann Chaddha mann.chad...@gmail.com wrote:
Hi All
http://www.cisco.com/en/US/products/hw/phones/ps379/products_tech_note09186a00800941bb.shtml
Complete these steps:
1.
Unplug the power cable from the phone, and then plug in the cable again.
The phone begins its power up cycle.
2.
Immediately press and hold *#* and while the
15 matches
Mail list logo
