The first requirement is auto attendant even before getting to bacd. The
dail by name is a requirement for the AA section
On 15 April 2011 20:31, Rrcrumm rrcr...@yahoo.com wrote:
Hi
Looming at wb2 lab 4 in bacd it is asking fir dial by name. I could not
fond anything on this.
Can someone
you have to create an application user on ccm with cti enabled and the cti
route point and cti ports are associated to. You then run the initialization
on CUE with the application username and password you created. You can also
just paste this information into the ccn subsystem jtapi in the
Hi
Looming at wb2 lab 4 in bacd it is asking fir dial by name. I could not fond
anything on this.
Can someone enlighten
Me what needs to be configured?
Thanks
Randall
Sent from my iPhone
On Apr 14, 2011, at 4:15 AM, mgscip gpsvoiceexpe...@yahoo.com wrote:
Hi ,
Thanks a lot. Once i give
Hi All,
Was practicing workbook 2 lab 1, on the question regarding QOS between HQ
and BR1/BR2, I've enable
auto qos voip trust in BR1 router on the PVC interface. Once the router was
reboot, I notice that BR1 IP phones
wasn't able to get IP address from the DHCP server, which is CUCM Pub in
this
can you share your experience?
2011/4/13 Chevy chevy.man...@gmail.com
Figured it out. Thanks
On Wed, Apr 13, 2011 at 12:04 PM, Bo Gao bga...@gmail.com wrote:
A couple thing I would do:
1) Check if there are missing config on the Gateways, especially your
outbound dial peers; Check the
Hi Alex,
Did you enable it on the other side?
It's not because of traffic-shaping itself. It's has probably happened
because you have frame-relay fragmentation enabled.
DHCP should not be big packets, so it should not get fragmented, but
probably .cnf file download was failing from the tftp
Hi guys,
I'm working on QoS Vol2 lab7, when I assigned the class to serial interface I
got the below message:
HQ-RTR(config)#interface Serial0/0/1:0.1 point-to-point
HQ-RTR(config-subif)#bandw
HQ-RTR(config-subif)#bandwidth 384
HQ-RTR(config-subif)# frame-relay interface-dlci 201
Used find the route pattern to hit to enable the phone ring the cellphone
and also when you press the mobility softkey to send the call to the
cellphone.
On 15 April 2011 07:33, Erwan Erwan e_er...@yahoo.com wrote:
hi guys,
wondering do we need Rerouting CSS in RDP Profile for SNR ?
Hi All
I am doing Vol2-Lab 8. All phones are registered as SIP phones.
But I see that when I call from either 5002 or 1002 to each other, the phone
just keep waiting then restarts. Call to same site phone, like 5002
calling 5001 works. I also tried to implement SIP Dial Rules, still no luck.
I
Hi,
From this link
http://www.cisco.com/en/US/products/hw/switches/ps5023/products_tech_note091
86a0080883f9e.shtml
I found this exemple for Scheduler Configuration:
Rack1SW3(config-if)#srr-queue bandwidth share 1 75 25 5
Rack1SW3(config-if)#srr-queue bandwidth shape 3 0 0 0
Cisco Catalyst
Thanks
What do I need to do on the cli to enable dial by name?
Sent from my iPhone
On Apr 15, 2011, at 11:14 AM, Rogers Ochieng rogersochi...@gmail.com wrote:
The first requirement is auto attendant even before getting to bacd. The dail
by name is a requirement for the AA section
On 15
Erwan
The Rerouting CSS is used for dialing the SNR Device (like your cell phone).
This is used when someone calls your desk phone number eg 5002 which is
shared with your RDP.
The other CSS in the RDP is mainly used by MVA (DISA) functionality when
you call from your Cellphone into the Office.
Hi,
So what do I need to do for dial-by-name?
Thanks,
Randall
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Rogers
Ochieng
Sent: Wednesday, April 13, 2011 8:00 AM
To: mgscip
Cc: ccie
Subject: Re: [OSL | CCIE_Voice] B-ACD Not
Dear all,
I have 30 vrack vouchers to sale.. $25.00 per voucher - Paypal only
I'm not going to use them.. so email me if interested
Thanks
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Use the Dialed Number Analyzer and check which gateways are used during
outbound call
13.04.2011 19:29 пользователь Chevy chevy.man...@gmail.com написал:
I was hoping you all could help me out with this problem. We had a power
outage this past weekend and prior to this all was working fine.
Any kind soul able to help?
On Thu, Apr 14, 2011 at 5:40 PM, Alex Goh ncsalex@gmail.com wrote:
Hi All,
Understand that when an IP Phone was roaming and physical location of home
DP and roaming DP is different,
the roaming sensitive setting of the roaming DP will apply to the phone.
You need the CUE AA. Just configure the AA dial in number and listen to the
options available, you'll hear the dial by name
On 16 April 2011 04:59, Randall Crumm randall.cr...@flextronics.com wrote:
Hi,
So what do I need to do for dial-by-name?
Thanks,
Randall
*From:*
Hi Nizar - In this example working in reverse:
priority-queue out
PQ is enabled and will always be served until empty in the event of
congestion
srr-queue bandwidth shape 3 0 0 0
since PQ is enabled the shaped value for Q1 is ignored
srr-queue bandwidth share 1 75 25 5
since PQ is enabled
Hi - You will need to push the call through CUE AA
http://www.cisco.com/en/US/products/sw/voicesw/ps5520/products_configuration_example09186a0080566c4a.shtml
http://www.cisco.com/en/US/products/sw/voicesw/ps5520/products_configuration_example09186a0080566c4a.shtml
hth
Brian
On Fri, Apr 15, 2011
HI All,
I just bought INE Voice WB 12 , would like to setup basic home lab as per
equipment below , could someone please share some light on how to interconnect
those devices together.
a.. Intel I7 processor PC , 8GB ram, with GNS3 and vmware workstation 7
a.. C2621XM-2FE ,128MB Ram /
Hi
I integrated cups and cucm. Everything looks good from both sides but when I
log in with cupc I get limited and there is no presence or option to switch to
softphone
Any thoughts
Thanks
Randall
Sent from my iPhone
On Apr 12, 2011, at 3:23 PM, Rrcrumm rrcr...@yahoo.com wrote:
Yes,
Ah
I see from cupc server health I not able to download from tftp server but the I
is
Correct and the phone
Sent from my iPhone is correct in cucm
Thx
Rc
On Apr 16, 2011, at 4:01 PM, Rrcrumm rrcr...@yahoo.com wrote:
Hi
I integrated cups and cucm. Everything looks good from both sides but
hi all,
can someone advice, what i miss in CUPS voicemail.
I kept geeting this error from Show Server Health in CUPC client
Failed to Connect - Invalid Credentials or Account Locked
I verified user name and password for voicemail is working in Phone itself
leading CCIE Lab training, please
visit www.ipexpert.com
-- next part --
An HTML attachment was scrubbed...
URL: /archives/ccie_voice/attachments/20110416/8d04279f/attachment-0001.html
--
Message: 2
Date: Sat, 16 Apr 2011 13:25:47
Before adding the user to UC; did you configure the Allow Users to Access
Voice Mail Using an IMAP Client option in COS?
On Sat, Apr 16, 2011 at 6:32 PM, Erwan Erwan e_er...@yahoo.com wrote:
hi all,
can someone advice, what i miss in CUPS voicemail.
I kept geeting this error from Show
Any kind soul able to help?
On Fri, Apr 15, 2011 at 5:17 PM, Alex Goh ncsalex@gmail.com wrote:
Any kind soul able to help?
On Thu, Apr 14, 2011 at 5:40 PM, Alex Goh ncsalex@gmail.com wrote:
Hi All,
Understand that when an IP Phone was roaming and physical location of home
DP and
Either roaming is not enabled for the phone. Or you have not attached the
subnet of the HQ site to the HQ device pool (using device mobility info under
the system menu).
--
Vik Malhi – CCIE #13890
Managing Partner / Instructor - IPexpert, Inc.
Mailto: vma...@ipexpert.com
Telephone:
Also remember it is not the voicemail password but rather the web application
password that the CUPC will be using.
--
Vik Malhi – CCIE #13890
Managing Partner / Instructor - IPexpert, Inc.
Mailto: vma...@ipexpert.com
Telephone: +1.810.326.1444
Fax: +1.810.454.0130
Live Assistance, Please
hi all,
Just wondering if AAR can be applied to call from UCM to CME (thru
Gatekeeper)
HQ Phone (UCM) WAN (Gatekeeper)--CUCME (BR2 phone)
if yes, how to achieve that ?
I only know AAR can be applied to UCM to UCM ( HQ phone in UCM call to
BR2 phone
Hi George,
Thanks for pointed out could be fragmentation issue. I notice my map-class
on HQ-RTR was missing the fragment statement. I believe
this could be the issue, going to try it out tomorrow.
For some reason, that day after I tried to use auto qos for FRF.12 and the
map class doesn't
Hello Guys,
were you able to find the resolution
i had the same problem on vol 2 lab 7
where my call fails once i'm authenticated . when i press 1 to make a call a
soon as i dial 1002 my call drops
i double checked all the possible solutions and i have all of those set
still nothing
do you know
hmm yes i tried this too: br1ph1 , password :cisco , from UCM End User
--- On Sun, 4/17/11, Vik Malhi vma...@ipexpert.com wrote:
From: Vik Malhi vma...@ipexpert.com
Subject: Re: [OSL | CCIE_Voice] Voice mail in CUPS
To: Roger Carpio roger.car...@gmail.com
Cc: Erwan Erwan e_er...@yahoo.com,
Hi Vik,
The device mobility is on for the phone, and the subnet is correctly
attached for BR1 and HQ site. I'm will try to redo the DMI see how it goes.
Thanks
Regards,
Alex
On Sun, Apr 17, 2011 at 11:38 AM, Vik Malhi vma...@ipexpert.com wrote:
Either roaming is not enabled for the phone.
Not the CUCM password you have tu use the unity connection user web password
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Erwan Erwan
Sent: Sunday, April 17, 2011 8:10 AM
To: Roger Carpio; Vik Malhi
Cc: ccie_voice@onlinestudylist.com
34 matches
Mail list logo