yes dear,,,
this is always come for sip phones
please use cisco always and it is default for sip.
Amit
On Sat, Jun 11, 2011 at 6:16 AM, donny f f.faraday...@gmail.com wrote:
hi all,
does any one know why , when I change PHONE setting, by press **# , it ask
for password ?
and username
This requirement is stupid. If you never ever take a lab before and no one
tells you site C is HK, who will know this is an requirement?
Or maybe Site B is now India, how many people know the settings there?
On Fri, Jun 10, 2011 at 11:03 PM, Victor Malyuga
victor_maly...@yahoo.comwrote:
from
agree.
But if cisco drops point for not configuring it, this is the reason why.
--- On Sat, 11/6/11, Ki Wi kiwi.vo...@gmail.com wrote:
From: Ki Wi kiwi.vo...@gmail.com
Subject: Re: [OSL | CCIE_Voice] irrelevant commands
To: Victor Malyuga victor_maly...@yahoo.com
Cc:
Consider the Service provider expecting leading digit for international calls
and NOT called party type.
also you required to configure SRST on the GW which connected to PSTN and
registered on CUCM by H323.
When ever you dial international the leading digit should be send along with
DNIS and
hi all,
wondering , when question VM port for CUE is 3
then we have to config maxsession 3 , like below ?
ccn trigger sip phonenumber 4200
application voicemail
enable
maxsesison 3
tks
___
For more information regarding industry
I'll reply under your choices...
Choice 1- need to use only 4 digit ANI on CUCM route pattern to match with
translation-rule 10 on GW but you won't get mark because you did not
configure 10 digit ANI on route pattern !
Why do you think you will loose points? As long as provider sees 10digit ANI
Catch on both in your translation rule.
voice translation-rule 10
rule 1 /^16662225...$/ /+\0/ type any international plan any isdn
rule 2 /^5...$/ /+1666222/ type any international plan any isdn
You're other configs stay the same.
On Sat, Jun 11, 2011 at 3:18 PM, Chris Green
Hi Chris,
I have read several times but I haven’t been able to understand the scenario.
Could you clarify it a little bit?
Thanks!
De: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] En nombre de Chris Green
Enviado el: sábado, 11 de junio de 2011 21:18
Maybe there a run sql update?
Sent from my iPhone
Pls pardon my fat fingers.
On Jun 10, 2011, at 9:15 PM, VoIP Study jtvoipst...@gmail.com wrote:
I found this to be a quick way to rebuild the services. As discussed on this
list, the 7.0.x release notes indicate how to rebuild the Standard
Hi,
Basically for international calls you need to pass 10 digit ANI and leading
number (011) along with DNIS to the Service Provider.
Since your GW is H323, CUCM send the calls to GW then GW has to have such a
dial-peer way out to PSTN. Midwhile your Dial-Peer has to match the
Thank you George,
I failed my exam and I got shock on Call routing mark which was too low, I am
trying to dig down to it and find my mistakes.
I debug isdn q931 and test the outputs one by one but I am not sure how I got
very low mark on call routing.
From:
If I have only SCCP phones, do I still need to configure SRST reference in
CUCM?
I thought I could just specify the default router as SRST in device pool.
Was that correct?
Thanks!
Greg
___
For more information regarding industry leading CCIE Lab
Hello All,
What QOS most to be configured at port F0/0 that connect gateway WAN with
switch LAN. In other Word what QOS applies to port Sw that connect Gateway WAN,
How to be classify the input/output to port the goes to LAN
Flow QOS
Ipphone--port Sw--SW--SWportGW-fa0/0GW(here is doubt)-WAN
That's your SRST reference.
On Sat, Jun 11, 2011 at 6:15 PM, Greg cnn...@gmail.com wrote:
If I have only SCCP phones, do I still need to configure SRST reference in
CUCM?
I thought I could just specify the default router as SRST in device pool.
Was that correct?
Thanks!
Greg
Hummm it all depends; real world or CCIE lab? Are you sending packets
already tagged to the switch? Then you might just honor it and pass it thru
or have some policing based on the tags, like guarantee some bandwidth for
voice but drop COS to 0 when exceeded. I think you have some options to play
hi all,
wondering , where to configure if question ask Number of voicemail port
=5 in CUE ?
tks
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job?
Really depends on what is being asked of you, can you trust the
traffic/markings from the SW? Do you have to classify and mark the traffic
on router locally? Are you allowed to classify using nbar or ACL's? There
are several ways to handle qos settings, really depends on the question. I
would
Just ran across this post by accident:
https://cisco-support.hosted.jivesoftware.com/message/477914#477914
Re-grade or re-read for CCIE Voice lab is actively being pursued as a
service to our candidates. It's more costly and administratively complex to
offer re-reads for Voice, but we see it as
hi all,
when we asked to configure park up to 4 simultaneous call.
mean we will need 45[0-3] or 45[0-4] ?
tks
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and
45[0-3] will do... we will get 4 numbers here..
On Sun, Jun 12, 2011 at 8:17 AM, donny f f.faraday...@gmail.com wrote:
hi all,
when we asked to configure park up to 4 simultaneous call.
mean we will need 45[0-3] or 45[0-4] ?
tks
___
20 matches
Mail list logo