What component of CCX Engine is in partial service?
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Thomas Koch
Sent: Friday, July 08, 2011 12:33 AM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] CCX 7.0.2 and
Hi ,
CCX engine in partial service is normal
What's exactly the problem u have ?
Please describe more .
Best Regards ,
Moataz Mamdouh Tolba
CCIE # 26129 (Voice)
-Original Message-
From: Thomas Koch koch1...@comcast.net
Sender: ccie_voice-boun...@onlinestudylist.com
Date: Thu, 7 Jul 2011
Hi All,
I was trying to bring up B-acd in CME. I have put in the config's as per the
cisco documentation, but i don't see the incoming voip dial-peer kick-in to
invoke the tcl script. I am not sure, if am missing anything. Appreciate if you
could take a look at the config and give your inputs.
Sorry about the attachment, below copied are the configs and debug.
Debug
ii11-3845-1-BR2#
Calling Number=, Called Number=3500, Peer Info Type=DIALPEER_INFO_SPEECH
Jul 8 12:28:15.375: //-1/95767D918006/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=3500
Jul 8 12:28:15.375:
Gents,
I am facing an EM issue on CME cannot step over.
EM is configured like:
voice logout-profile 1
number 3002 type normal
!
voice user-profile 1
max-idle-time 10
user br2phn3 password adgjm
number 3005 type normal
speed-dial 1 3006
!
ephone 2
privacy off
device-security-mode none
!!
Thanks in advance
Sanoj
PS: Attached are the configs and debugs
-- next part --
An HTML attachment was scrubbed...
URL: /archives/ccie_voice/attachments/20110708/839e1c84/attachment.html
are the configs and debugs
-- next part --
An HTML attachment was scrubbed...
URL: /archives/ccie_voice/attachments/20110708/839e1c84/attachment.html
--
___
CCIE_Voice mailing list
CCIE_Voice
. No luck!!
Thanks in advance
Sanoj
PS: Attached are the configs and debugs
-- next part --
An HTML attachment was scrubbed...
URL: /archives/ccie_voice/attachments/20110708/839e1c84/attachment.html
Has anyone tried disabling call log on IP Phone?
Thanks
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
Something like this setting on the line configuration page?
inline: Screen shot 2011-07-08 at 2.12.08 PM.png
On Jul 8, 2011, at 1:40 PM, Bijoy (Bijoy) Rai wrote:
Has anyone tried disabling call log on IP Phone?
Thanks
___
For more information
what i'd personally do is
go to telephony service
telephony-service
no authentication credential secretname psswrd
no url services http://10.10.202.1/CMEserverForPhone/serviceurl
no url authentication
http://10.10.202.1/CCMCIP/authenticate.aspsecretname psswrd
and then go to global config
Hi Brian,
Yes the phone's are registered. Both the SIP and skinny phone.
Hi Webb,
Yes i have given the moh under telephony services, flash path is right. Because
the tcl scrip in invoked on a incoming pots dial-peer.
Its strange that it doesn't work on the voip dial-peer
Regards
Sanoj
hi all,
when I do Auto qos and put the service-policy. it gave me the error below
SB(config-map-class)#service-policy output AutoQoS-Policy-UnTrust
*Must remove existing frame-relay vc queueing*
what I miss here?
tks
___
For more information
i'm a bit rusty with b-acd, but i think param aa-hunt3 3005 needs to point to
a hunt pilot.
hth
Date: Fri, 8 Jul 2011 11:55:48 -0700
From: san...@yahoo.com
To: ccie_voice@onlinestudylist.com; btmulg...@gmail.com; webbpo...@gmail.com
Subject: Re: [OSL | CCIE_Voice] B-acd - Not working
Hi
Hi ,
I have a problem when I tried to use sip auto-registration in cucm 7.0 to
register CIPC IPPhone as SIP endpoint.
I changed the settings in the Enterprise parameters to SIP , restarted call
manager service. I even rebooted the call manager but still the same. It got
registered but as
Hi All
i am having problem controlling my remote phones using the phoneview
application. i am only able to make calls from my hq phone but not cme and
branch 1. all my phones are registered but i am not able to do a refresh on the
phones. Any suggestions
Are you using phoneview to control all 3 sites?
Maybe you know more features than I do but I only use the phoneview to
control one site at a timemostly, whichever site the CME is on since
other remote-control software doesn't support CME very well.
My config is set up as is:
HQ SB (CUCM) -
Hello I have doubt is possible to have several port to same autoattendant.I
would like test if for example I have a 4fxo I wonder if can to do this work,
is possible?
application
service autoatt flash:its-CISCO.2.0.2.0.tcl
paramspace english index 1
paramspace english language en
param
Khaled, I thing you have to use a fresh installed CIPC. i.e. not previously
registered as a sccp phone.
or you may try to manually register the phone as SIP then try
auto-registering.
regards,
2011/7/8 khaled Saholy khaled_sah...@hotmail.com
Hi ,
I have a problem when I tried to use sip
Thanks Shady.
I actually did as you suggested but finally solved the problem by installing
the newer version of CIPC (7.0.3).
regards
Khaled Al-Saholy
Date: Sat, 9 Jul 2011 03:30:01 +0200
Subject: Re: [OSL | CCIE_Voice] SIP auto-registration failure with CIPC
From: shady@gmail.com
To:
Hello
Choose SIP from the call control settings menu of CIPC itself
Best Regards ,
Moataz Mamdouh Tolba
CCIE # 26129 (Voice)
-Original Message-
From: Shady Hasan shady@gmail.com
Sender: ccie_voice-boun...@onlinestudylist.com
Date: Sat, 9 Jul 2011 03:30:01
To: khaled
21 matches
Mail list logo