hi Vik and others,
Have you ever encounter this on proctor rack. Router will not load the MVA
application.
( i have reset PUB and router ,still same)
Wondering if this is VM bug or proctor ruouter error and what is the
workaround ?
Jul 21 10:52:15.755: //-1//HIFS:/hifs_http_c
Hi Guys,
Who want CUE-AIM-1G module? It is pretty new one. Any body interested,
please let me know. I can send the photo to you. Thanks.
Cheers,
Vincent
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.c
I'm working on putting together my home lab and have started working on CME.
I have researched the 7940 and 7960 and on CUCM7 they are supported with the
following SIP images 7940 SIP-P0S3-8-12-00 and 7960 SIP-SIP41.9-0-2SR1S. Will
these same images work on CME. Does someone out there know wha
Congratulations and thanks for sharing your experience with us.
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
Way to go Bro! and thanks for sharing your strategy.
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
congratulations Emin
good job man !!
2011/7/20 Ashraf Ayyash
> Congratulatuion Emin , all the best ,
>
> Ash
>
> On Wed, Jul 20, 2011 at 6:22 PM, Emin Guliyev
> wrote:
> > Guys,
> >
> >
> >
> > I passed the lab yesterday on second attempt. I
> appreciate
> > all the help I have
Congratulatuion Emin , all the best ,
Ash
On Wed, Jul 20, 2011 at 6:22 PM, Emin Guliyev wrote:
> Guys,
>
>
>
> I passed the lab yesterday on second attempt. I appreciate
> all the help I have gotten from OSL.
>
>
>
> Regards,
>
>
>
> Emin
>
> _
I have been trying to follow the many posts regarding this issue. I look
forward to Steven sharing what resolved the issue because I have some of the
same inventory in my lab and don't want to repeat the problem.
I've been troubleshooting for a long time and have had many occasions where
all it t
Can you check that?
http://dreamforccie.wordpress.com/2010/08/07/understanding-mgcp-packets-a-brief-overview-and-example-with-debugs/
http://ccie-musketeers.blogspot.com/2011/04/mgcp-call-preservation-porcess-with.html
https://learningnetwork.cisco.com/docs/DOC-3924
___
Hello,
Did you reboot the UC server after you changed the smtp domain?
Did you set the dns servers on the UC
Barry
-Original Message-
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of
ccie_voice-requ...@onlinestudylist.com
Sent:
Try these:
1. Check this check box under SMTP > Server: Allow connections from
untrusted IP addresses.
2. Have you restart UC server?
Check these and try again.
On Wed, Jul 20, 2011 at 12:36 PM, amit batra wrote:
> Hello Everyone
>
>I have configured VPIM as mentioned in the lab an
Guys,
I passed the lab yesterday on second attempt. I appreciate all
the help I have gotten from OSL.
Regards,
Emin
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP o
Steve,
I'm trying to understand your problem. Could you explain what you mean by -
however it does not show as registered in the CUCM 7.02 interface sh isdn stat.
Can you send output and explain what the problem is. Maybe I can make some
suggestions.
--ms
_
can you share the configuration error?
On Wed, Jul 20, 2011 at 5:59 AM, steven moran wrote:
> Dear all just to let you know that I was helped by George in webex session
> and he found a configuration error in the my CUCM and solved the issue.
> Many thanks to all who offered advice.
>
> Best reg
Dear all just to let you know that I was helped by George in webex session
and he found a configuration error in the my CUCM and solved the issue.
Many thanks to all who offered advice.
Best regards,
Steve
___
For more information regarding industry lea
Hello Everyone
I have configured VPIM as mentioned in the lab and using
the same steps mentioned in the video by Vik..But i am unable to send
message from any of the locations.
When i try to send message from the phone, i get the confirmation that "message
sent" but no MWI no message
Maybe you've already done this but, I would try deleting and readding the GW
in CUCM.
Octavian
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of steven moran
Sent: Wednesday, July 20, 2011 11:13 AM
To: amit batra; ccie_voice@onlinestud
Would you know why the MGCP Packet debug shows the commuication going to
port 2427 whereas the sh ccm specifies it to use port 2428
Steve
On Wed, Jul 20, 2011 at 6:21 PM, steven moran wrote:
>
> BR1-RTR(config)#
> *Jul 19 10:03:38.550: MGCP Packet sent to 10.10.210.12:2427--->
> NTFY 162794359
Also please note that in the sh ccm at the end it does not show any packets
recieved, where as the 2811 does. I shut down the sub on 10.10.210.13 to
simply things
Steve
BR1-RTR(config)#do sh ccm
MGCP Domain Name: BR1-RTR.lab.com
PriorityStatus Host
BR1-RTR(config)#
*Jul 19 10:03:38.550: MGCP Packet sent to 10.10.210.12:2427--->
NTFY 162794359 *@BR1-RTR.lab.com MGCP 0.1
X: 0
O:
<---
*Jul 19 10:03:38.554: MGCP Packet received from 10.10.210.12:2427--->
200 162794359
<---
On Wed, Jul 20, 2011 at 6:15 PM, Santiago Figueroa wrote:
> You can tr
Yes I am, however if is remove the mgcp bind control/media source interface
Loopabck 0 command and restrat mgcp - I see that ip address in the CUCM
interface changes as expected to the nearest interface - serial int
10.10.111.2 but the device still shows as unregistered whereas the sh ccm
shows it
Hi,
thanks for the suggestions - I have done all of these to no avail. There is
no firewall or ACL between the router and the CUCM - this is a lab network.
I have a 2811 that is correctly registered and working. The 2651 is on the
latest IOS available, the MGCP is the only protocol running on th
Thanks petter for the suugestions, I had tried them before to no avail but
tried again anyway.
The 2651xm still shows as unregistered in the CUCM interface - by the way I
also have a 2811 and that shows as resisterd and verified working as
expected.
Best regards,
Steve
_
Exist any log in RTMT in sylog applications?
De: Santiago Figueroa
Enviado el: miércoles, 20 de julio de 2011 02:36 a.m.
Para: steven moran
Asunto: RE: [OSL | CCIE_Voice] 2651xm and MGCP gateway - help required
Hello You can try reload a CCM?do you have any firewal
- try to reset the MGCP stack on gateway by issuing 'no mgcp' than 'mgcp'
commands
- if no change, reset the Cisco RIS Data Collector under Network Services at
Servicability page of CUCM. This will synchronize the admin page to internal
database.
Peter
- Original Message -
From: steven
Dear all,
I posted this a couple of days ago and have tried all of the suggestions and
many more from trawling the websites and still I cannot pinpoint the issue.
In brief, this is part of the IPExpets vol1 ex 4
I have a vwic-2mft-e1 in my 2651 running (C2600-ADVENTERPRISEK9_IVS-M),
Version 12.4(
26 matches
Mail list logo