Hi Guys,
Who want CUE-AIM-1G module? It is pretty new one. Any body interested,
please let me know. I can send the photo to you. Thanks.
Cheers,
Vincent
___
For more information regarding industry leading CCIE Lab training, please visit
hi Vik and others,
Have you ever encounter this on proctor rack. Router will not load the MVA
application.
( i have reset PUB and router ,still same)
Wondering if this is VM bug or proctor ruouter error and what is the
workaround ?
Jul 21 10:52:15.755:
hi Erwan,
is this H323 gateway or MGCP gatway?
if this is H323 gateway you do not need to do hairpinning,
if mgcp then you need to do hairpinning,
most likely, you are getting error message due to 'server mwa' command in
voip and pots dialpeer.
could you please post your full config of this
Hello All ,
This error indicates that while loading the script, the VXML file
IVRMainpage.vxml failed to be downloaded from 10.10.210.10:8080 (HTTP
GET).
maybe a firewall in the network is blocking the request from your GW
interface to 10.10.210.10:8080 or the GET HTTP souce ip is the reason
An important difference between 40/60 and newer phones are actually specific to
SIP. When dialing from a 40/60 in SIP, it uses en bloc dialing, meaning that it
sends the called party as one big set of numbers. 41/61 and later do KPML
which acts more like SCCP in that each digit is sent as it's
Use your CUCM to load sip, even in the lab or real world it works best.
Then once upgraded point the tftp (option 150) back at the CME and you then
can get registered on the CME.
I have done this several times without issue. However, I seldom work with
7960, mostly 61/62/65.
I think from
anyone with a PC style VMWare server and wanting to upgrade, deal at NewEgg
this weekend get 16GB DDR3 1600 RAM for $135
use code EMCKCHJ37
Last week, the Kingston's 4x 4gb were down to a record low $89 after rebate.
It sold out after two days but I would expect memory prices to keep falling
lower lower.
Kingston HyperX 16GB (4x4GB) DDR3-1600MHz Desktop Memory $89.95AR
*
*
*
*
I'm following the strategy of everyone else and using CUCM to dictate the
version of SIP running on the phones in my lab. I have 7960s running the
default version of SIP software that is available on CUCM 7.0(1). It shows
up as P0S3-08-8-00 in the device defaults page. I have registered phones
Answering VMWare question.
If you can afford to, go Bare-metal VMWare ESXi.
Sam
On Thu, Jul 21, 2011 at 9:27 AM, indigoboy indigo...@gmail.com wrote:
Last week, the Kingston's 4x 4gb were down to a record low $89 after
rebate.
It sold out after two days but I would expect memory prices to
I think everyone has SIP registration issue at first with CUCME : )
From: Jason Lee [mailto:jas7...@gmail.com]
Sent: Thursday, July 21, 2011 9:15 AM
To: Bill Lake
Cc: michael.se...@compucom.com; ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] CCIE VOICE LAB PHONES [7940-7960]
So Bill. Just so I understand you. Register the SIP phones to CUCM them just
move them over to CUCME. That's sounds easy enough since CUCM already has the
phone loads for both the 7940 and 7960's. I didn't buy the newer phones to try
and same a little money. I got new 7940s and 7960s, 8
Just wanted to double check what was the software versions for the CCIE-Voice
Labs?
Is it 7.0 or 7.1. It would be great to know the exact version
Regards,
Rohan
___
For more information regarding industry leading CCIE Lab training, please visit
I was wondering if anyone interested in one-on-one pre-lab class. And if
yes, how much you're willing to pay for it.
Here are the details:
Duration: 8 hours.
Delivery mothod: Virtual classroom (webex and voice conference) with CCIE
instructors.
Targeted audience: For the candidates who have
Sorry I don't believe 3 hours 45 minutes.
Can anyone who passed says they finished in four hours?
Randall
Sent from my iPhone
On Jul 21, 2011, at 10:03 AM, Voice Lab vlab...@gmail.com wrote:
I was wondering if anyone interested in one-on-one pre-lab class. And if
yes, how much you're
7.0
https://learningnetwork.cisco.com/docs/DOC-5292
KP
On Thu, Jul 21, 2011 at 8:06 AM, Ramos, Rohan rra...@presidio.com wrote:
Just wanted to double check what was the software versions for the
CCIE-Voice Labs?
** **
Is it 7.0 or 7.1. It would be great to know the exact version
Adil,
tks for help, so u mean i do not need this command for h323?
application service mwa http://x.x.x.x
- this is nothing to do until dialpeer level, this issue come up when load the
applicatio service .
--- On Thu, 7/21/11, Adil Shaikh adil.sha...@gmail.com wrote:
From: Adil
I'm good with how to calculate BW from the QoS SRND, however it seems to get
a little squishy when it comes to values for cRTP and rounding the output.
For example, say I have a requirement to allow 5 g729 calls and I'm using
MLP with header compression. We know that by default CRTp should be 2
I know ESX would be the fastest but I'd like to be able to use the box for
other things occasionally.
That being said:
1) are drivers a pain to load on ESX?
2) is there a dual-boot option where I can boot ESX and Windows?
On Thu, Jul 21, 2011 at 7:36 AM, Sam Park
Yes you should be able to dual boot, I doubt that the boot loaders would
work but you could use the BIOS controls to select the boot device. Some
systems like Dell/HP ect let you pick the boot device from a menu.
So if I was doing this, I would load windows on 1 disk, disconnect that
disk,
This seems like a doable solution. to dualboot from the bios.
In terms of quantifying the cost-benefit of going into a ESX environment,
what would you say the advantages are?
That is, in terms of speed, is it about 20% faster than a windows platform?
Just trying to put it in numbers to justify
i have always used the values from the QoS SRND and i haven't had any
problems
take a look at the following analysis
http://www.mail-archive.com/ccie_voice@onlinestudylist.com/msg06644.html
2011/7/21 CCIEVoiceKP ccievoic...@gmail.com
I'm good with how to calculate BW from the QoS SRND,
LOL!
3:45 can easily be done with you know all the questions answers AHEAD of
time.
At that point, you are just typing in commands like a monkey.
Monkey see, Monkey do.
What is funny/interesting is how the plan to cover 5 labs in 8 hours.
that would require doing each lab in 1.6 hours.
Now
hi erwan,
if your router is an H323 and you are getting inbound for Mobile Voice
Access, you need 'service mwa' command on POTS dial-peer which has
incoming-called number 3000.
you do not need the same command on voip dial-peer.
You will always need 'application' 'service mwa http://..'
ESXi is loaded via a keyboard and mouse in this situation, after that is
complete, everything else has to be completed remotely. You first go to a
web page, get the VM client, install client and begin installing your
Virtual Machines (VM's) that is it. You might want to play with shared
hi Adil,
My issue is not able to load Application service mva.
I load this
application
service mwa http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml
and gave me the error:
*Jul 21 10:52:15.755: //-1//HIFS:/hifs_http_cb: hifs http callback: load of
and here is my config (when I able to load mva , i have no issue for receive
and outgoing call in MVA)
This is work all the time, if I able to load the MVA
application
service mwa http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml
!
voice service voip
allow-connections h323 to
hi Ash,
Thanks, this is very make sense. I will test in my next session.
I was able to ping from router to PUB 10.10.210.10.
I have loaded with basic image in proctor rack,should not be any ACL blocking
it,
And from their diagram it only show BR router connect thru FR to PUB.
tks
--- On
28 matches
Mail list logo
