Dears,
Any one tried before to get ipccc agents in the ready state after login .
Normally agents went to Not Ready state and have to manually change it to
ready after they login from the service button.
I tried a lot in my home lab, but always agents login in Not Ready state.
Any idea ?
--
Dears,
I repeated the scenario and used the command voicemail mailbox-selection
original-called on CUE, but still CUE running the 4002 vm not called no 4001
below is deb isd and deb ccsip message
Call is 911 --- 4001 CFWDALL --- 4002 CUE VM
*Is there any command needed on CME to forward
Nice output. As you can see CME is sending an INVITE to CUE with Diversion
4002 which is the last redirecting number. Would you please try this command
on dial-peer sending the call to CUE *mailbox-selection* *orig-called-num *and
let us know how it goes?
Hello All,
When asked to remove the Conference softkey from a CME SCCP phone, I can do
this in two different ways as illustrated below. I would like to know the
correct way of doing this if asked in the Lab exam. Wondering if they would be
looking for the features blocked or softkey keyword.
Did you try setting it in Desktop Administrator?
Sent from my Verizon Wireless Phone
- Reply message -
From: Wael Agina waelag...@gmail.com
Date: Sat, Aug 20, 2011 6:20 am
Subject: [OSL | CCIE_Voice] UCCX Agent in ready state after login
To: ccie_voice@onlinestudylist.com
Dears,
Any
Hi Roger, All,
Many thanks for your input and it works OK now.
Applying the *mailbox-selection* {*last-redirect-num* | *orig-called-num*}
command on the CME DIal-Peer itself that sends the call to cue solved the
issue.
Now on SIP message we see correct DNIS is there not redirected one.
check
Hello Wael ,
from the RmCmResources page you can change the Automatic
Available from disable to enable and this should met your requirement
,
i recommend you to brows the CCX pages as well and try to find what
options we have and of course the admin guide of the CCX is so handy
to understand
Thanks Ashraf, khaled, ALL,
I will try this options on next home study and let you know the results,
Many thanks again.
Regards,
Wael Agina
On Sat, Aug 20, 2011 at 11:57 PM, Ashraf Ayyash ash.ayy...@gmail.comwrote:
Hello Wael ,
from the RmCmResources page you can change the Automatic
Hello Ray , All ,
also here is the troubleshooting DOC for the feature :
http://www.cisco.com/en/US/products/sw/custcosw/ps1846/products_tech_note09186a008084321e.shtml
Ash
On Thu, Aug 18, 2011 at 10:08 PM, Ashraf Ayyash ash.ayy...@gmail.com wrote:
Hello Ray ,
in which phase exactly you got
Use the command show power inline to confirm you have a power supply capable
of providing PoE power. If you do you will get results like
show power inline
PowerSupply SlotNum. Maximum Allocated Status
--- --- - --
INT-PS 0
Hello
I have a problem with the MVA, SNR.
I make a call from the Remote destination to the MVA script, the number is
recognized and I only enter my PIN number. I press 1 to make a call to an
internal phone. The problem is that when the internal phone is receiving
the call the calling name is not
Hello All,
i gave this feature try in my lab , here is a summary of the config :
1- you need to add the phones using BAT to the CCM :
1A - from the CUCM BAT menu go to Import/ExportExport from the
Tar File Nameadd any name, from the Device Data , check Phone ,
this will create File to
And the proctor can Verify if the phone registered simply by going to
the BULK menu TapsView Taps Log File :
here is the results in my lab :
TAPS LOG FILE
Date Device Name Auto-registered DN Dialed DN Final DN Result
Lots of vouchers to let go, selling at $22 each, only accept payment via
paypal.
Contact me direct at lim.t...@gmail.com to deal.
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or
Hi,
I am unable to access or open proctorlabs.com site.
getting below error.
Server ErrorThe server encountered an internal error and was unable to complete
your request.JRun closed connection.
Regards,
Nish
15 matches
Mail list logo
