guys...
really hard time...
i applied config...to enable ipcc extension in cucm..\\\
http://www.cisco.com/en/US/products/sw/custcosw/ps1846/products_tech_note09186a008088cff0.shtml
Cisco CallManager 5.x, ICD Extension is known as IPCC Express Extension.
You can update the IPCC Express
Hi All,
We have same extension range of 65XX both in Location A as well as in
Location B. For dialing Location B extension we use prefix 81 .
For dialling Location A extension we use prefix 80 .
Location A to Location B-- 8065XX
Location B to Location A- 8165XX
Now the problem is if we want to
You can create another partition and assigned the extensions accordingly in
Unity Connection, don't forget to assign them to CSS.
On Thu, Jun 27, 2013 at 10:38 AM, ccieid1ot ccieid...@gmail.com wrote:
Is this for a CCIE Lab or production environment?
On Thu, Jun 27, 2013 at 7:57 AM,
Experts,
Does anyone know what version of software is tested on the 3750? Has Cisco
publicly made remarks about what specific IOS version is in the lab exam?
All I know is 12.2. Anyone know anything more specific than that?
I have a hard time believing the answer is no.
Thanks,
Brian
On
hi folks,
is it better to use auto qos voip trust or auto qos voip for SB site in
exam.
my understanding is we have to use auto qos voip , since we can't trust other
devices for providing marking.
advice pls?
tks
K
From: Karen Johnson
it dose not matter marking happen or not actaully.
in the lab, u have to read question carefully, question state clearly it is
trusted or not.
Date: Thu, 27 Jun 2013 15:04:57 -0700
From: karen.johnson...@yahoo.ca
To: ccie_voice@onlinestudylist.com
CC: ccie_voice@onlinestudylist.com
Subject: [OSL
Anyone?
Aman
From: Kapuria, Aman
Sent: Wednesday, 26 June 2013 3:31 PM
To: ccie_voice@onlinestudylist.com
Subject: L2 overhead for QoS
Hi All,
What L2 overhead do you use for frf.12 and MLP when you calculate number of
calls over a link? Different providers have different approach around
Guys I got the fix,
The problem was a typo error due to my fast copy and paste
in SB router i type gateway command by default and that resulted the
following
R1#sh gatekee end
GATEKEEPER ENDPOINT REGISTRATION
