Jeff,
I believe this is a pretty well known bug :)
Chad
On Mon, Apr 5, 2010 at 10:47 AM, Jeff Cotter jcot...@voxns.com wrote:
I can’t seem to get the voice-class command and transcoder to work
between UCM and CME SIP phone. If I explicitly
Configure the codec on the dial-peer to match
They are populated while ringing and they are only called ecc's when
using cad with ucce not uccx. I think tanner hit the nail on the head
though with the layout and set enterprise data steps.
Chad Stachowicz
415-794-8770
Please excuse any mispellings as this message was from my mobile
I'm currently just starting my firswt CCIE V3 blueprint session, and I have
my proctor guide and workbook, and I am familiar with IP Expert and can log
into device and such. However the workbook does not have the IP Address and
VLan's for each POD laid out anywhere nor do i see it anywhere in the
I think in general its a bit crazy that people think having a CCIE makes a
difference in anything. a CCIE only matters if you are new to a company who
wnats your cert, or your verbal and 'prior works' aren't engouh to speak for
themselves. I can say the best engineers making the most money I
I also should have added that I think getting your CCIE is an incredible
achievement, I'm just saying spending your time achieving customers
requiremnts and trust is a better way to spend your time then achieving yet
another cert.
Chad
On Fri, Oct 30, 2009 at 12:37 AM, Jonathan Charles
param welcome-prompt flash:en_bacd_welcome.au
it should be
param welcome-prompt flash:_bacd_welcome.au
because it prepends the en with
paramspace english language en
HTH
Chad
On Sat, Aug 23, 2008 at 1:26 PM, Jonathan Charles [EMAIL PROTECTED] wrote:
This is an H.323 gateway, source phone
of course it could but in the lab its almost guarenteed you are going to see
cor (class of restriction) and therefore its best off to practice it with
911 9911... etc etc..
Chad
On 7/12/08, Greg Hauser [EMAIL PROTECTED] wrote:
Hello-
I have a very basic h323 GW specific question. Do we
oh you said transfer, not sure!
On 6/26/08, Chad Stachowicz [EMAIL PROTECTED] wrote:
ccievoice1,
you can achieve this with CFWD Calling search spaces of course!
Chad
On 6/26/08, ccievoice1 [EMAIL PROTECTED] wrote:
Hi,
Are you referring to Block OffNet to OffNet Transfer
It definatly works... are you using a TAG?
Chad
On 6/26/08, Gregory Jost (grjost) [EMAIL PROTECTED] wrote:
I can never seem to get it to register via SCCP.
Greg Jost
Network Consulting Engineer
Unified Communications Practice
Cisco Systems, Inc.
214-274-1922
| CCIE_Voice] POTS Dial-peer
By default pots dial peer will strip the wildcard, so I think 2[015]
will be get stripped, thanks for your reply Chand.
--Bala.
Chad Stachowicz [EMAIL PROTECTED] wrote:
0014152001
On Sun, Jun 8, 2008 at 9:42 PM, Balamurugan Singaram [EMAIL PROTECTED]
wrote:
Hi
Ah
I feel great reading that other link.
I ran into this studying about 5 months back, and it made me very angry.
Totally a bug.
Chad
On 6/4/08, Vik Malhi [EMAIL PROTECTED] wrote:
You can prove the transcoder is good by making a direct call into the
CUE. This also would prove the
Me either.
:
On Sat, Apr 19, 2008 at 8:02 AM, Gregory Jost (grjost) [EMAIL PROTECTED]
wrote:
This never works for me.
1.Stop Windows Time Service (W32Time)
2.Ensure NTP is started and startup automatic
3.Edit NTP.conf
4.
Yeah but what that should tell you is to reload the tcl to use the new
param's!!!
Chad
On 4/12/08, ccievoice1 [EMAIL PROTECTED] wrote:
Well, you can just ignore the error message. It appeared every time you
entered a param syntax.
HTH
On Sun, Apr 13, 2008 at 10:02 AM, Jacob Owen [EMAIL
params ? interesting...
So what is the new param for
param handoff-string
param second-greeting-time
param voice-mail
and rest of the syntax started with param ?
Please advice, thanks.
On Sun, Apr 13, 2008 at 10:15 AM, Chad Stachowicz
[EMAIL PROTECTED] wrote:
Yeah but what that should tell
to get you wrong. Anyway, I never needed to
reload the TCL script for the param to work. I mean, in my lab it just
worked after entering the necessary BACD syntax.
Thanks.
On Sun, Apr 13, 2008 at 10:26 AM, Chad Stachowicz
[EMAIL PROTECTED] wrote:
ccievoice1,
What I meant to say
Yeah, the commitment that IPExpert makes to their candidates is amazing.
Unmatched in the industry, and highly appreciated by all its students.
Thanks guys!!
Cheers,
Chad
On Fri, Apr 11, 2008 at 5:40 PM, Jacob Owen [EMAIL PROTECTED] wrote:
Yeah,
Plus the so called Practical Labs from
all i will say is this bit me in the butt first time taking the lab, i had
to have the prcotor fix my stuff about 7 minutes in :)
On 4/3/08, Mark Snow [EMAIL PROTECTED] wrote:
Well - there will always be for any given lab - but they also change from
time to time - so posting them here wouldn't
I just some thing the book said not to :)
On 4/3/08, Jonathan Charles [EMAIL PROTECTED] wrote:
Fix what stuff?
Jonathan
On Thu, Apr 3, 2008 at 5:34 PM, Chad Stachowicz
[EMAIL PROTECTED] wrote:
all i will say is this bit me in the butt first time taking the lab, i
had
to have
I have noticed that my fractional PRI config comes back when the MGCP
gateway registers for the first time... Is this because I have forgotten to
busy out the config in CUCM?
Cheers,
Chad
On Mon, Mar 31, 2008 at 4:14 PM, Devildoc [EMAIL PROTECTED] wrote:
That's not wrong. You can include
Indeed it is assumed in DCM to drop a trailing # sign
On Mar 14, 2008, at 9:27 PM, Jonathan Charles [EMAIL PROTECTED]
wrote:
I just read that the trailing-# DDI only applies to the @ pattern...
is this true?
Jonathan
Ccm
On Mar 15, 2008, at 9:42 PM, Chad Stachowicz
[EMAIL PROTECTED] wrote:
Indeed it is assumed in DCM to drop a trailing # sign
On Mar 14, 2008, at 9:27 PM, Jonathan Charles [EMAIL PROTECTED]
wrote:
I just read that the trailing-# DDI only applies to the @ pattern...
is this true
Mike,
I can tell you at San Jose this is not the case, my off site redirect
links worked
Chad
On 2/29/08, Mike Prestidge [EMAIL PROTECTED] wrote:
Hi Scott,
it sounds like there are some discrepancies then depending on where you
sit the lab? I had my first attempt two weeks ago and
you know on call manager how the external phone number mask will populate
the top right portion of a phone display, in the black bar at the top. Is
there a particular field that will change this? I have figured out a dodgy
way using secondary numbers on my ephone dn, but I wondered if there was
in the ipexpert book it jsut shows registering the gateway to sip. How do i
specify toi only register the FXP port?
Thanks
Chad
Guys I know this is silly but its the last day before my lab, and I'm having
somme jitters
G711 in location 64 or 80kbps?
Thanks
Chad
Mark,
so your saying just IP pim dense mode no ip pim sparse-dense-mode?
Thanks,
Chad
On Feb 13, 2008 9:44 AM, Mark Snow [EMAIL PROTECTED] wrote:
Each router only decrements 1 hop per router - not interface - so
technically it would be 2 hops away.
Every interface involved in
I also have a question along the same lines. Can we do this with standard
frame relay traffic shapping and not VATS? is VATS a requirement for ppp?
Thanks,
Chad
On 2/13/08, Devildoc [EMAIL PROTECTED] wrote:
Can someone please let me know what I am missing from my configuration
below for
I'm sorry,
Can someone please verify I did the correct method of nesting policy maps
assuming TOHQLLQ was an LLQ
policy-map TOHQLLQ
policy-map TOHQ
class class-default
shape average 729600
shape adaptive 729600
shape fr-voice-adapt deactivation 30
service-policy TOHQLLQ
Also devil
below is the relevant config, I don't understand why no outgoing dial-peer
is being matched? Any help?
Thanks
!
application
service queue flash:app-b-acd-2.1.0.0.tcl
param queue-len 20
param number-of-hunt-grps 1
param aa-hunt2 3210
!
service aa flash:app-b-acd-aa-2.1.0.0.tcl
:18 PM
*To:* Chad Stachowicz
*Cc:* CCIE Maillist
*Subject:* Re: [OSL | CCIE_Voice] CME TCL B-ACD
Service Applications cannot be triggered on Outbound Dial Peers ... only
Inbound Dial Peers.
On Feb 12, 2008, at 6:59 PM, Chad Stachowicz wrote:
below is the relevant config, I don't
Alright I ahve it connecting, buts its not playing any audio or respdonding
to key presses. Anything come to the top of anyone's head?
Thanks
Chad
On 2/12/08, Patel, Mrugesh [EMAIL PROTECTED] wrote:
I always think far. J
*From:* Chad Stachowicz [mailto:[EMAIL PROTECTED]
*Sent
any idea why we can't do this? It doesn't even try a call forward if I
bring it in as sipg711ulaw? dtmf problem? but even if it was dtmf I
figure they would still try and transfer in
Thanks,
Chad
guys,
can we get mutlitcast MOH to out ipcommunicator? I see multicast
incrementing on interfaces to BR1 with sh ip multicast interface int but
can't hear it
Thanks,
Chad
All,
I'm looking for a good read or guide for understanding dtmf-relay.
Mainly I'm trying to understand what to modify and why I do it for H323 to
Sip conversions. Thanks,
Chad
Guys,
I have never had to put any tftp server commands or define any loads for
any phone types under telephony service. Is there any reason to do this
unless we are asked to upgrade the firmwares in the lab?
Thanks,
Chad
all,
sadly in the last week they have migrated all of the Call manager docs
off of univercd and including the nice ports doc. from a prior post from
vik
Couple of issues. For a full list of port numbers see link below. I've
modifiedthe ACL with the SIP port #'s and removed the unused
Patel,
PSTN wouldn't send that now would it? the only way you going to be
recieving a tech prefix of #anything is over VOIP
Chad
On 2/8/08, Patel, Mrugesh [EMAIL PROTECTED] wrote:
I meant if the call to CME was being handed off from PSTN, and HQ site
would be dialing *#2*5552223001
- IPexpert, Inc.
CCIE Voice #13890 CCSI #31584
URL: http://www.IPexpert.com http://www.ipexpert.com/
Toll Free: +1.866.225.8064
International: +1.810.326.1444
--
*From:* [EMAIL PROTECTED] [mailto:
[EMAIL PROTECTED] *On Behalf Of *Chad Stachowicz
*Sent:* Wednesday
International: +1.810.326.1444
--
*From:* Chad Stachowicz [mailto:[EMAIL PROTECTED]
*Sent:* Thursday, January 31, 2008 3:41 PM
*To:* [EMAIL PROTECTED]
*Cc:* CCIE Maillist
*Subject:* Re: [OSL | CCIE_Voice] Gateway Location
Vik, I had a problem yesterday when a call
]
CC: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] IPCC Question
I think password should be *telecaster*
On Jan 30, 2008 11:24 AM, Chad Stachowicz [EMAIL PROTECTED]
wrote:
I think this one must be simple, but i couldn't find it on cisco
documentaiton.
Is there a special
Does anyone know how to do this? Please see the wierdness below.
VOICE-6500-1 (enable) sh port 7/4
* = Configured MAC Address
# = 802.1X Authenticated Port Name.
Port Name Status Vlan Duplex Speed Type
- -- -- --
http://www.ipexpert.com/
Toll Free: +1.866.225.8064
International: +1.810.326.1444
--
*From:* [EMAIL PROTECTED] [mailto:
[EMAIL PROTECTED] *On Behalf Of *Chad Stachowicz
*Sent:* Wednesday, January 30, 2008 3:24 PM
*To:* CCIE Maillist
*Subject:* [OSL
/product/voice/sw_ap_to/apps_5_0/english/agents/cad64ig.pdfunder
Cisco Customer Response Solutions
5.0(x) in UniverCD?
On Jan 31, 2008 1:40 PM, Chad Stachowicz [EMAIL PROTECTED] wrote:
it looks like the IPCC Express SRND is one of he links broken on
UniverCD... does anyone know a good place
I think this one must be simple, but i couldn't find it on cisco
documentaiton.
Is there a special password for telecaster, or should it be cisco?
Chad
Vik/Mark
pod 22
P22-BR2-RTR#sh ephone reg
ephone-1 Mac:0017.943A.987E TCP socket:[1] activeLine:0 REGISTERED in SCCP
ver 6
mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0
IP:10.22.202.50 49218 Telecaster 7940 keepalive 79 max_line 2
ephone-2 Mac:0007.EB39.B667 TCP
All,
is there somewhere within the pod to dl this from? I'm wondering if they
ask this in the lab how I dl the CUE script editor to my desktop..
Chad
and Audio Certification Training Tools for the Cisco CCIE RS Lab,
CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE
Storage Lab Certifications.
On Jan 22, 2008, at 12:20 AM, Chad Stachowicz wrote:
Guys,
I enabled the IPMA service and ran the qizard, however I canno
All,
I'm a little confused on when to use what types of trunks from ccm -
IPIPGW. If I have an IPIPGW registered to my gatekeeper and my dial peer's
use session target ras. Should I be sending calls to the IPIPGW with an
ICT(Gatekeeper controlled).
Thanks for the calrification,
Chad
alias (for the required e164 numbers registered
to the ccm).
also make sure when you regsiter the static alias of (pub and sub) define
them as the gateway (not the terminal)
-Senthil
On Jan 19, 2008 4:09 PM, Chad Stachowicz [EMAIL PROTECTED] wrote:
In my lab last night I couldn't find anyway
, CCIE Service Provider Lab , CCIE Voice
Lab and CCIE Storage Lab Certifications.
On Dec 23, 2007, at 1:57 PM, Chad Stachowicz wrote:
Mark how are we expected to fix replication ? Dbhelper?
Thanks.
Chad
Sent from my iPhone
On Dec 22, 2007, at 1:00 PM, Mark Snow [EMAIL PROTECTED] wrote
I just tried something else, its only on a
dspfarm profile X conference
transcode profiles seem to be alright.
On Dec 11, 2007 9:57 PM, Chad Stachowicz [EMAIL PROTECTED] wrote:
I have my resources configured identically on a CME and branch router (
except of course SCCP local and ip
51 matches
Mail list logo
