but the
problem is with CP-7960. The SIP functionality on the CP-7960 has limitation
and at times it may deceive you of your configuration spending hours of
troubleshooting.
*Sriharshaa Prabhakar*
--
*From:* Cristobal Priego [cristobalpri...@gmail.com]
*Sent:* Sunday
you can run multiple instances of softphones IP- BLue
however you can't test a few features because the ip blue doesn't support
it
on the VODs Vik recommends getting phones instead of softphones. but it
depends on the $$
2010/10/10 Kamran Ahsanullah kamran.ahsanul...@gmail.com
Hi Guys,
I
...
--
*From:* Cristobal Priego [cristobalpri...@gmail.com]
*Sent:* Sunday, October 10, 2010 10:00 PM
*To:* Sriharshaa Prabhakar
*Cc:* ccie_voice@onlinestudylist.com
*Subject:* Re: [OSL | CCIE_Voice] CCIE_Voice Digest, - CME SCCP SIP
Phone not displaying D-M-Y - Display is always D/M/Y
Hello all,
I'd like to get your thoughts on this, from all of you that have gone
through this lab 1A initial config
I connect to proctorlabs with the ezvpn. i have the router, switch and
phones
I was trying to configure Lab 1A.
i started my session this morning which is still active as of
/*
--
*From: *Cristobal Priego cristobalpri...@gmail.com
*Date: *Sat, 9 Oct 2010 07:09:13 -0700
*To: *OSL Group ccie_voice@onlinestudylist.com
*Subject: *[OSL | CCIE_Voice] Lab 1A: Implement Campus Infrastructure and
Services
Hello all,
I'd like to get your thoughts
at all. after connecting
those 2 phones to the same port on the switch
thanks for your feed back
2010/10/9 Cristobal Priego cristobalpri...@gmail.com
i loaded the initial config
after i reverted the pod and loaded the initial config everything is ok now
thanks
2010/10/9 Vik Malhi vma
not enough bandwidth refers to location based CAC
do you have the 2 ip blule phones on the same Device pool ?
2010/9/29 Peterson Gomes pgcristo...@gmail.com
Today, I scheduled a session and configured 2 ipblues. I try make a call
between ip blues but I receive message No Enough bandwidht.
I
Hello All,
i was wondering if you know how the iDivert softkey works
I'm implementing the + dial on a ucm implementation,
the phones can't see each other directly, there is a translation pattern in
between that globalizes the number to +1916... and i have a
transformation pattern assigned to
hello all,
I have a cisco 2951 router, witn an SRE module for unity express out of the
box, when i try to install cisco unity express version 8.0.2, it fails with
the following error
SMA-2951-2-Rocklin#service-module ism 0/0 status
Service Module is Cisco ISM0/0
Service Module supports session
thank you all
I figured this out
2010/8/27 Cristobal Priego cristobalpri...@gmail.com
hello all,
I have a cisco 2951 router, witn an SRE module for unity express out of the
box, when i try to install cisco unity express version 8.0.2, it fails with
the following error
SMA-2951-2-Rocklin
ill2...@gmail.com
Nice!
I am curious about the solution. Could you share it?
On Fri, Aug 27, 2010 at 5:08 PM, Cristobal Priego
cristobalpri...@gmail.com wrote:
thank you all
I figured this out
2010/8/27 Cristobal Priego cristobalpri...@gmail.com
hello all,
I have a cisco 2951 router
Hello all,
i have a question, on my script i want to check if an agent is logged in and
then either send the call to the queue of voicemail, however when an agent
is logged in. if i debug my script. the result of the get report statistics
step is negative, -1 and the call always goes to vm
could
?
2010/6/8 Cristobal Priego cristobalpri...@gmail.com
thank you very much this is very helpful
2010/6/8 Tanner Ezell tanner.ez...@gmail.com
Off the top of my head..
In UCCX Platform
1. Add Email CSQ via App Admin
2. Add Skills to Email CSQ via App Admin
3. Setup SMTP and IMAP via CDA
hello all,
I was wondering if you have ever configured Agent E-mail in uccx 7.0(1) with
premium
I need to configure agent e-mail, however Cisco documentation isn't very
good and i was wondering if maybe some of you guys have actually done it.
and could point me on the right direction
thank you
you're likely to encounter.
On Tue, Jun 8, 2010 at 9:26 AM, Cristobal Priego
cristobalpri...@gmail.com wrote:
hello all,
I was wondering if you have ever configured Agent E-mail in uccx 7.0(1)
with
premium
I need to configure agent e-mail, however Cisco documentation isn't very
hello all,
I was wondering if you have ever configured Agent E-mail in uccx 7.0(1) with
premium
I need to configure agent e-mail, however Cisco documentation isn't very
good and i was wondering if maybe some of you guys have actually done it
thank you
have a great day
Cristobal
have you added the ac application user to the Standard CTI Allow Call Park
Monitoring group?
2010/5/25 Angel Perez gorr...@hotmail.com
Hi:
Yesterday I was trying to create an AC pilot point, but the pilot didn't
get registered, I created a user with cti rights and with phones controlled,
no, besides the notification MWI should be on if you have a new vm, make
sure that the VM ports can reach your ext
2010/5/19 sean hurricane shurric...@gmail.com
Lab 8 question 4.6 asks to configure notification to mobile # when a
message is left for phone 2, i can leave a message and mobile
in order for you to do that all the servers must be members of the same
cluster. so on the callmanager group you can point your phones to the server
that you want. . the phones can have up to 3 redundant servers.
other than that SRST is your only potion
2010/5/19 Mav nihil...@gmail.com
Hello,
Hello all
I'm reading a bit about DSPs do you know an accurate way to calculate
how many calls are supported per DSP?
Besides the DSP calculator?
Something manual
Thanks
Sent from my iPhone
___
For more information regarding industry leading CCIE Lab
Hello all,
I was wondering if you guys could help me to understand MTP resources
better, what is the purpose of an mtp, besides supplementary services
Thank you
___
For more information regarding industry leading CCIE Lab training, please visit
Randall Saborio ill2...@gmail.com
Hi,
What reference document have you checked so far from Cisco.com ?
El mar, 11-05-2010 a las 09:32 -0700, Cristobal Priego escribió:
Hello all,
I was wondering if you guys could help me to understand MTP resources
better, what is the purpose of an mtp
is concerned.
They are also useful with RSVP to act as RSVP agents.
I hope that helps.
Roger
On Wed, May 12, 2010 at 2:32 AM, Cristobal Priego
cristobalpri...@gmail.com wrote:
Hello all,
I was wondering if you guys could help me to understand MTP resources
better, what is the purpose
Hello all
i have a question in regards to Agent-Based Routing. is there a way to get
the status of the agent with something similar to a get report statistic
before you send the call to that particular agent ?
if there isn't what happens if that agent is on not ready, or if the agent
is on a
Could you please check that the ip address and port number match in
the gateway and as well as on the MOH server
Could you please check if you hav the mrgl with the Meg tha has the
moh server with multicast enabled assigned to the gateway
Those are my two cents
Sent from my iPhone
On May
i have a question on this matter.
if you have a single CSQ with multiple skills.
on the script is there a step that will tell me the skills of the agents
that are logged in and based on the result , i can route the call
appropriately?
What I mean is. if I have 1 CSQ = CustomerService and
Hello all,
I was wondering if you know how to install UCCX using a standard win2k3 ? I
lost my cisco media and i want to install it for my lab but it doesn't work
please le tme know if you know how to install it using a standars windows
2k3 server
thank you
started on this matter, or threads started by
others. In any case, it's out there, just google :)
On Mon, May 3, 2010 at 12:36 PM, Cristobal Priego
cristobalpri...@gmail.com wrote:
Hello all,
I was wondering if you know how to install UCCX using a standard win2k3 ?
I
lost my cisco media
thank you
2010/5/3 Tanner Ezell tanner.ez...@gmail.com
http://www.mail-archive.com/ccie_voice@onlinestudylist.com/msg15380.html
The registry is attached to the thread as well.
On Mon, May 3, 2010 at 12:42 PM, Cristobal Priego
cristobalpri...@gmail.com wrote:
yes i indeed look
Hello all
Do you know if you can configure some kind of Multimedia queue? what i mean
is, when i have a caller in the queue and if he/se doesn't want to wait any
longer, they can press 1 to leave a voicemail(recorded message), instead of
sending that voicemail to a mailbox. i want that voicemail
I don't think a class codec is required as long as you have the codec g711
configured on the voip dial-peer
by default a voip dial-peer supports g.729 by default and CUE only supports
g.711 so we either need to force that call to be g711 somehow either using a
class codec command or just the
Hello all,
I have a question, when you have a site with 2 PRI's
1 dedicated for local calls only
1 dedicated for long distance only
how could you implemente LRGs ?
thanks
Cristobal
___
For more information regarding industry leading CCIE Lab
Hello All,
I have 2 questions for you
I need to create a script for an AA, the main prompt will allow the user to
dial the extension if the know it or wait to listen to the menu options
for the menu I need to use a menu step no big deal, and i'm thinking to
create a variable that will store the
tehre is asetting also as Pavan said
go to service parameters ccm and look for the H.323 device, unknown tcp
connections is set to false by default, set it to true and let us know how
it goes
2010/4/8 sean hurricane shurric...@gmail.com
Thanks all, i will try these suggestions tonite and
why don't you enable the following debug on the router
debug cch323 h225, to check the call setup and check how the gw attempts to
contact the cucm.
you can also enable debug cch323 h245 to check the logical channel
negotiation
2010/4/7 sean hurricane shurric...@gmail.com
Still no luck,
Hello all,
I'd like to know if you have any documentation or if you could point me on
the proper track. I'd like to set up a priority queue on my script. I'm
using the priority step, but it doesn't seem to be working properly. how do
i do it
thanks
Cris
it private, but just suggesting.
On Wed, Mar 24, 2010 at 12:03 PM, Cristobal Priego
cristobalpri...@gmail.com wrote:
thank you very much
2010/3/24 Tanner Ezell tanner.ez...@gmail.com
Eh?
I've attached a document I developed which explains everything you
need to get information from
:26 AM, Cristobal Priego
cristobalpri...@gmail.com wrote:
No Randall of course i have no problem to share it with the community. i
will do so
2010/3/24 Randall Saborio ill2...@gmail.com
Lucky Cristobal.
Are you concerned about your intellectual property rights, or will you
share
it with the Set
Enterprise Info step, or add it to the default layout.
On Thu, Mar 25, 2010 at 2:16 PM, Cristobal Priego
cristobalpri...@gmail.com wrote:
Hello Tanner,
I have a question. I know I'm doing something wrong. when the call is
sent
to the agent. on the Data Field part. I see ANI
thank you very much
2010/3/24 Tanner Ezell tanner.ez...@gmail.com
Eh?
I've attached a document I developed which explains everything you
need to get information from the script to the CAD software.
On Wed, Mar 24, 2010 at 12:29 PM, Cristobal Priego
cristobalpri...@gmail.com wrote:
Hello
Hello,
I'd like to get some advice on this.
I need to create a script that will get some variables from the customer.
and I'd like those variables to be displayed on the Agent Desktop.
I've been looking on Enterprise Data Format and on the Desktop Administrator
I created a workflow and I
Hello all,
I was checking the blueprint for the ccie voice written and. on under dial
plan it says SIP Proxy
Dial Plan: Gatekeeper, SIP Proxy, Route Patterns, Route Groups, Route Lists,
Digit Manipulation and Digit Analysis
Do you have any recommendations on SIP Proxy documents ?
thank you
Correct me if im wrong but Those phones doesn't support + dialing. I
had the same problem that you had and i replaced the ipc with a 41
and ot worked great. You need to try it on a 7941 and it will work.
Did you add the translation pattern to call back?
Sent from my iPhone
On Mar 16, 2010,
at the SIP carrier, I would contact
them and ask what are they seeing on their system, what are you sending that
their system doesn’t like and is causing them to drop the call.
* **Jeff *
*From:* Cristobal Priego [mailto:cristobalpri...@gmail.com]
*Sent:* Thursday, March 04, 2010 5:40 PM
Hello,
we have a production voip implementation, with SIP carriers, 3 days ago we
were reported that MOH wasn't heard by the callers, they get silence and
that they can't transfer calls or if they place a call on hold, when they
try to resume it, it drops.
this is pretty much our topology
SIP
...@onlinestudylist.com [mailto:
ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *Cristobal Priego
*Sent:* Thursday, March 04, 2010 4:04 PM
*To:* ccie_voice@onlinestudylist.com
*Subject:* [OSL | CCIE_Voice] Hold, Xfer, doesn't work, it drops the call
when it comes from a CUBE gateway
into configured
xform css/pt for a match. Make sure that you are matching and the pt/css
is also exclusive.
Device pool xform overrides xform directly configured on the phone.
-- Mustafa
Cristobal Priego wrote:
Hello,
I know this has been posted quite some times.
I'm configuring
Hello,
I know this has been posted quite some times.
I'm configuring + dialing on my lab and I think I have a problem on
internal calls, when I call a 4 digit extension, the called number shows the
globalized number on the display, I'm not able to get it to localize the
number to 4 digits. I see
Guys I have a question related to UCCX and SQL
when you run a backup on UCCX in regards to SQL (backups / reindex) is that
included in the backup ?
What are the steps that i need to follow to get the versions upgraded to at
least SQL05?
thanks
Cris
2010/2/1 vccie2010 vccie2...@gmail.com
Will appreciate if someone had done it before or can shed some light on
this-
I need to configure CUPC client / Desk Phone for Voice, Video, IM and
email. My understnading /Qs are :
1. Have AD integration with CUCM 7X.
this is optional for CUPS
Hello all,
I have a little issue here, hopefully you can help me out
I have CME 7.1.1.0 installed and I have SNR on a few extensions configured
working great, my problem starts when a call is connected on an extension
that has SNR enabled, when i press the mobility soft key to transfer the
call
Hello all,
i just have a question that hopefully with all of your comments i can
undersdand
this is the scenario. a connection between a cme and uc520. the phones
registered to both routers are running SCCP.
is there a reason why you want to configure the voip dial-peers that will
allow the
...@onlinestudylist.com [mailto:
ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *Mark Nigh
*Sent:* Tuesday, January 19, 2010 2:20 PM
*To:* Cristobal Priego; ccie_voice@onlinestudylist.com
*Subject:* Re: [OSL | CCIE_Voice] uccx issue
Double-check to ensure the CTI Route Point is registered, if not, delete
Hello all
I have a question, i'm in the middle of programming a scripting and just
realized that i need to create a nested if step.
Do you know what's the maximum if's that can be nested? I need to nest 25
ifs on my script
or if you could recommend a better way to do it I'd appreciated it
this
to perform the
function that you want based on DNIS and return the password to the script.
~Chris
*From:* Cristobal Priego cristobalpri...@gmail.com
*Sent:* Friday, January 15, 2010 12:25 PM
*To:* ccie_voice@onlinestudylist.com
*Subject:* [OSL | CCIE_Voice] UCCX Scripting
Hello all
I
up
with UCCX and supports HA.
~Chris
*From:* Cristobal Priego cristobalpri...@gmail.com
*Sent:* Friday, January 15, 2010 2:15 PM
*To:* Christopher Clouse christopherc_56...@hotmail.com
*Cc:* ccie_voice@onlinestudylist.com
*Subject:* Re: [OSL | CCIE_Voice] UCCX Scripting
I'm trying the xml
Tanner,
I have a question,
when i read the xml file it always return Null so the first if statement is
always false i can't move forward.
what am i doing wrong ?
2010/1/15 Cristobal Priego cristobalpri...@gmail.com
oh ok, i didn't see that part.
my apologies
2010/1/15 Tanner Ezell
Hello team,
I was wondering if you have any kind of documentation on how to configure an
ATA on a CME or if you could point me to the proper documentation
thank you
Cris
___
For more information regarding industry leading CCIE Lab training, please
congratulations !
2010/1/6 Ken McCoy kmc...@trusteddatasolutions.com
I took the test on Monday in San Jose and passed.
First, thanks to Vic and IPexpert for doing a great job with the Voice
track. They really do a good job building a solid foundation for you to
work from. I used the BLS
when you get those kinds of messages typically means that Cisco Unity didn't
recognize the extension as a known extension for a subscriber, hence is
sending you to a rule that it has to play the opening greeting ... make sure
that you have the proper extension configured in unity connection and/or
Thank you
Merry Christmas to you too!
Sent from my iPhone
On Dec 25, 2009, at 7:16 AM, Jeffrey W. Hall layer8...@gmail.com
wrote:
I hope everyone has a very Merry Christmas today!
Jeff
___
For more information regarding industry leading CCIE
nevermind
please disregard
2009/12/7 Cristobal Priego cristobalpri...@gmail.com
Hello all
do you have access to ipexpert web site ?
thanks
Cris
___
For more information regarding industry leading CCIE Lab training, please visit
Do not assign the Css to the profile. Assign the css to the phones
Sent from my iPhone
On Dec 3, 2009, at 5:49 PM, Omotayo adefilabi...@gmail.com wrote:
Hello,
am working on the technology labs
i have configured extension mobily for hq phone 1 and br1 phone 1
phones
hq phone 1 can dial
Hello team,
I was wondering if any of you guys have ever configured the Advanced VM
settings for CUE. this is done through IMAP.
I configured the IMAP part, the group and and all of that in CUE, on the
client (outlook 2007) when i configure the new account what do you guys put
in e-mail address?
hello team
I just figured it out and it works great
thanks
2009/11/18 Cristobal Priego cristobalpri...@gmail.com
Hello team,
I was wondering if any of you guys have ever configured the Advanced VM
settings for CUE. this is done through IMAP.
I configured the IMAP part, the group
Hello all,
do you know if CUE has the capability to integrate with exchange and send
the voice-mails to the users as e-mails attachments ?
thank you
Cris
___
For more information regarding industry leading CCIE Lab training, please visit
,
please notify the sender immediately by replying to this message and
destroying the original and all copies. Thank you.
*From:* ccie_voice-boun...@onlinestudylist.com [mailto:
ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *Cristobal Priego
*Sent:* Thursday, November 12, 2009 9:12 AM
what i do is, create a new partition and then send the incoming call to a
translation pattern, append the 9 on the calling field of the translation
pattern and then send the call back to the phone.
Hello
I have a question on how the redirecting number works
this is my problem i one of my users do a CFA to his Cell Phone number
on the primary line.
if I try to call this number internally. I get a fast busy
this is what i see on the pri
tcstkrt1(config)#
Oct 9 17:51:56.508: ISDN
you can use the calling party transformation CSS for + dialing
2009/10/5 Erwan Erwan e_er...@yahoo.com
hi,
in the CCM Gateway configuration page, under *Call Routing
Information-Outbound Calls*
Use Device Pool Calling Party Transformation CSS
Is that mean *Calling Party Ext Mask* from
did you configure the bind command under the group ?
2009/10/2 ABIOLA ADEFILA adefilabi...@gmail.com
Hello,
I have configured the conference bridge on the router
sccp is up and the dsp is up too
it does not register to the callmanager, does any one have an idea why this
is
egards
I'd like to know too
Sent from my iPhone
On Sep 30, 2009, at 8:58 PM, Aamir Panjwani aamir.panjw...@ivision.com.au
wrote:
I would like to know that one too please…
From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-
boun...@onlinestudylist.com] On Behalf Of Daryl Smith
All presence information is delivered from CUPS to CUPC by Notify
message. The source uis CUCM.
Let's make sure that the SIP trunk was configured properly
( destination ip and port number), also let's check that the security
profile is configured properly, usually the non secure sip trunk
All presence information is delivered from CUPS to CUPC by Notify
message. The source uis CUCM.
Let's make sure that the SIP trunk was configured properly
( destination ip and port number), also let's check that the security
profile is configured properly, usually the non secure sip trunk
Guys do you know if you can cluster the unity connection over the wan
for failover?
Is it supported?
Thanks
Sent from my iPhone
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
If you use the embeded cucm databse you bees to login into the cups
ccmenduser GUI and add the user manually from there one by one
Thenyou need to logout of cupc and log back in
Sent from my iPhone
On Sep 20, 2009, at 11:20 AM, Craig Rees cr...@gtri.com wrote:
Does CUPS and CUPC require a
this does not seem to work either
-Original Message-
From: Cristobal Priego [mailto:cristobalpri...@gmail.com]
Sent: Sunday, September 20, 2009 1:31 PM
To: Craig Rees
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] CCIE_Voice Digest, Vol 43, Issue 134
Yes, actually
H323 is a peer to peer protocol, so you, right you need to build the
dial plan on the gateway, to the gateway cucm is just one more peer,
however the phones are running sccp in most cases and the phones need
the cucm to tell them what to do. In a large scale deployment it can
become
i have change the ip addresses on a production cluster during a maintenance
window and the server is still up and running without any issues.
what i did is i changed the settings first on the user interface, then i
changed the ip address on the CLI reboot the cluster and i didn't have any
did you enable BLF under service parameters, Clusterwide Parameters -
Presence ?
by default is set to false, you need to change it to true
2009/8/28 J Hogan j.jho...@gmail.com
Hello All
I am having trouble with the out of the box presence on the phones.
I have enable allow subscription and
When you change the ip, make sure that replication isn't broken
Sent from my iPhone
On Aug 12, 2009, at 3:01 PM, Andrew Dempsey apd...@gmail.com wrote:
This is hit or miss as to whether your database survives for me.
-- Sent from my Palm Prē
Kevin Damisch wrote:
fails, you can play a
prompt to the caller with something intelligent (your conference bridge
isn’t setup right not, call back in a little while or call xxx-). I’m
pretty sure you should be able to play the same in Unity also.
*From:* Cristobal Priego [mailto:cristobalpri...@gmail.com
Hello Experts,
I was wondering if you know how to use UCCX to request a password before a
user is allowed to establish a meet-me conference call
do you know if this is possible ?
thanks
Cris
___
For more information regarding industry leading CCIE
I have a copy
I let me check how big is the file
2009/7/23 Art Sandborgh asandbo...@hotmail.com
All,
I attempted to set up AC on the new 7.0 V3 rack today and came across a
roadblock. For 7.0 and beyond Cisco requires that you buy a different
console if you are a New install and they no
Art
you can download the file from here
http://rapidshare.com/files/259206841/CiscoAttendantConsoleClient.rar.html
MD5: 41A0E94DC6889361719CFE2E4EF2E917
Cris
2009/7/23 Cristobal Priego cristobalpri...@gmail.com
I have a copy
I let me check how big is the file
2009/7/23 Art Sandborgh
number.
If not then do what you want (hang up, re-prompt user, etc.)
*From:* Jeffrey Hall [mailto:layer8...@gmail.com]
*Sent:* Thursday, July 23, 2009 2:24 PM
*To:* Michael Ciarfello
*Cc:* Cristobal Priego; ccie_voice@onlinestudylist.com
*Subject:* Re: [OSL | CCIE_Voice] UCCX and meet-me
/ gateway(s) will need to have access to the IPCC RP.
I might have confused you by combining too many possibilities into one
message. Let me know your exact requirements and I’d be glad to clean it up
for you.
*From:* Cristobal Priego [mailto:cristobalpri...@gmail.com]
*Sent:* Thursday
nevermind I got it sorry
2009/7/23 Cristobal Priego cristobalpri...@gmail.com
I think I got it
Is there a way to do a consult transfer with the Script. that's the exact
scenario that we want. once the meet-me is setup internally we want only to
authenticate the callers dialing in from
I got it
2009/7/13 Mark Snow ms...@ipexpert.com
Pls reply if you get this.
Cheers,
--
Mark Snow
CCIE #14073 (Voice, Security)
Senior Technical Instructor - IPexpert, Inc.
Telephone: +1.810.326.1444
Fax: +1.309.413.4097
Mailto: ms...@ipexpert.com
--
Join our free online support and
Experts,
When I go to Application Management and if I try to add a trigger to my
application .
I get the following error
* Failed to create the CTI Route Point and corresponding Line on Unified CM.
what's wrong ?
thank you
___
For more information
...@onlinestudylist.com [mailto:
ccie_voice-boun...@onlinestudylist.com] Im Auftrag von Jonathan Charles
Gesendet: Freitag, 12. Juni 2009 09:11
An: Cristobal Priego
Cc: ccie_voice@onlinestudylist.com; cisco-v...@puck.nether.net
Betreff: Re: [OSL | CCIE_Voice] CUPC Presence statuses...
Really
Congratulations Cliff
way to go !
2009/7/2 Wayne Lawson groupst...@ipexpert.com
Awesome job, Cliff - congrats!
Regards,
Wayne A. Lawson II - CCIE #5244
Founder, President CEO:
- IPexpert, Inc.
- Proctor Labs, Inc.
- Platinum Solutions Group, LLC.
Mailto:
Hello Experts,
I have a quick question. when you want to check an incoming call on the
trace what do you need to look for in the trace to be pointed at the
beginning of the call
thanks
Cris
do i look for the first occurrence based on the calling number or the called
number?
yes the stationD and the Station ID
2009/7/2 c george cisco...@hotmail.com
look for the 1st occurrence of the number then look for the ID number and
start looking for that.
This will show you the signaling
on the MOH server, what is the hop count set to for the selected MOH file?
when you place a call on hold on the remote site you can issue this cmd on
the remote site
show ccm-manager music-on-hold to confirm that you're playing the music
locally on the Branch and use debug ephone moh
if you issue
The show ccm-manager music-on-hold command displays information about
connections on hold only. It does not display information about multicast
streams going to IP phones on hold.
2009/7/2 Scott ODonnell scott.odonn...@gmail.com
This is the output of the commands
Show ephone summary :
File
is the file loaded in Flash has the proper format ?
2009/7/2 Sergio Polizer spoli...@hotmail.com
No, MMoH is not considered in location bandwidth.
Could be a wrong MRG of the GW Device Pool?
Date: Thu, 2 Jul 2009 16:20:04 -0400
From: scott.odonn...@gmail.com
To:
look for the unassigned DNs if the DN is there try to delete the file and
try it again
2009/6/29 Bill Hatcher wchatc...@gmail.com
I am loving the new blueprint material. Have been going through the labs,
and have an issue. I deleted a SIP phone and went to re-add it, but when I
try to add
congratulations
could you share your expirience with us
what tips could you provide?
2009/6/28 kapil atrish nice_cha...@yahoo.com
Hi list,
I've passed the lab exam and would like to thanks each one of you for your
contributions to this list.
I would also like to extend my thanks to
Is your CIPC pointing to the correct TFTP server ?
Launch your CIPC and do a right click on it then go to preferences, click on
the Network tab and make sure that the proper TFTP servers are configured
there
2009/6/26 Erwan Erwan e_er...@yahoo.com
hi,
I have auto-reg IP Blue and real 7940 and
201 - 300 of 338 matches
Mail list logo