James Key
From: ccie_voice-boun...@onlinestudylist.com
[ccie_voice-boun...@onlinestudylist.com] On Behalf Of Emanuel Damasceno
[aedamasc...@gmail.com]
Sent: Tuesday, November 08, 2011 7:18 PM
To: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice
Congrats Mark!
James Key
From: ccie_voice-boun...@onlinestudylist.com
[ccie_voice-boun...@onlinestudylist.com] On Behalf Of Mark Holloway
[...@markholloway.com]
Sent: Tuesday, November 02, 2010 6:17 PM
To: OSL Group
Subject: [OSL | CCIE_Voice] Thank
Mark,
Looking at your config, a little confused on your ip source address under
call-manager fallback and what you have for your route under multicast. One is
listed as voice vlan gateway and the other is voice vlan ip, but two different
networks. What you have listed for your CUCM config
this in the lab during my
studies.
James Key
From: ccie_voice-boun...@onlinestudylist.com
[ccie_voice-boun...@onlinestudylist.com] On Behalf Of Matthew Berry
[ciscovoiceg...@gmail.com]
Sent: Sunday, March 28, 2010 11:13 AM
To: OSL
Subject: [OSL | CCIE_Voice
Do you currently have multicast MOH streaming from flash? If so, make sure the
no mgcp timer receive-rtcp is NOT in your config. If it is, remove (don't
forget no mgcp/mgcp ;-) ). Place a call in from pstn and place on hold. Your
call should disconnect after the given time.
James Key
...@gmail.com]
Sent: Sunday, March 28, 2010 1:49 PM
To: James Key
Cc: OSL
Subject: Re: [OSL | CCIE_Voice] Discrepancy between Mark Snow's VoD and Lab
Results?
James -
The command is not in my config. I attached it for reference.
When I run a debug ephone moh I can see the MoH routes being used
Well said Tanner.
James Key
-Original Message-
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Tanner Ezell
Sent: Thursday, March 18, 2010 12:27 AM
To: Kevin Damisch
Cc: ccie_voice@onlinestudylist.com; David Lee
Subject: Re
preparing for this exam soon.
James Key
NOTICE: This electronic mail message and any files transmitted with it are
intended
exclusively for the individual or entity to which it is addressed. The message,
together with any attachment, may contain confidential and/or privileged
information.
Any
number.Plan on
labbing it up again today.
James Key
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Omotayo
Sent: Saturday, November 21, 2009 4:29 AM
To: OSL Group
Subject: [OSL | CCIE_Voice] MOBILE ACCESS
Hello,
I have asked
I have it configured on a 7941 and line is set for 4/2.
From: Talmadge Almand [mailto:t...@ipexpert.com]
Sent: Saturday, November 21, 2009 10:31 AM
To: James Key
Cc: Omotayo; OSL Group
Subject: Re: [OSL | CCIE_Voice] MOBILE ACCESS
What do you have the lines configured for max calls?
James
yes it does. All functionality seems to be there, with the exception of the
remote in use.
From: Talmadge Almand [...@ipexpert.com]
Sent: Saturday, November 21, 2009 11:11 AM
To: James Key
Cc: Omotayo; OSL Group
Subject: Re: [OSL | CCIE_Voice] MOBILE ACCESS
does
Remove both MGCP bind commands, see if it comes up, then add back in.
From: ccie_voice-boun...@onlinestudylist.com
[ccie_voice-boun...@onlinestudylist.com] On Behalf Of J Hogan
[j.jho...@gmail.com]
Sent: Sunday, September 27, 2009 8:41 AM
To: Nara Shikamaru
Cc:
Anyone have any guidance on the questions below I posted yesterday?
-James
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of James Key
Sent: Wednesday, August 26, 2009 2:09 PM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice
Reading over the QoS SRND and trying to get a better understanding of 3750 QoS
and more specifically, the Conditionally-Trusted IP Phone + PC with
Scavenger-Class QoS (Basic) Model. I understand the ACLs and marking traffic as
well as queuing, but am having some difficulty in understanding the
Try changing dial-peer 30 to something more specific (making sure you can hit
the needed HQ DNs)
Ex:
dial-peer voice 30 voip
destination-pat 2[01]..
session target ras
translation-profile out TOGK4
James Key
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun
Make sure the CCM service is started on the Sub.
James
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of adefila seun
Sent: Wednesday, April 22, 2009 6:59 AM
To: ccie_voice@onlinestudylist.com; NarinderKumar
Subject: Re: [OSL | CCIE_Voice]
of device trying to iniate the transfer, but can't
seem to get it to meet both of these requirments. Anyone know if this is
possible and if so, what I am overlooking?
James Key
NOTICE: This electronic mail message and any files transmitted with it are
intended
exclusively for the individual
Thanks for the reply Cliff. That is what I was thinking and did configure it
this way, but when site B tries to transfer i get the message that transfer is
not allowed. I will take a closer look.
James Key
From: Cliff McGlamry [cl...@mcglamry.net]
Sent: Monday
username hqph2 phonenumber 2002
list name hqph2 number 2002 create
list number 2002 description null
list number 2002 member hqph2 type remote
James Key
-Original Message-
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Chris
Duy,
I have run into this same issue periodically and have yet to find any info on
how to correct it. If you find a fix, please share!
James
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Duy Nguyen
Sent: Friday, April 03, 2009 1:15
there mentioning this.
James Key
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of kapil atrish
Sent: Wednesday, April 01, 2009 11:44 AM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] CCM 7 on VMWare
Hi list,
I want to know if CCM 7
it would depend on your specific requirments in
the lab.
James Key
From: ccie_voice-boun...@onlinestudylist.com
[ccie_voice-boun...@onlinestudylist.com] On Behalf Of Cliff McGlamry
[cl...@mcglamry.net]
Sent: Wednesday, April 01, 2009 4:55 PM
To: Jiahong - tobeccie Fang
bucks? ;-) I
purchased it several months ago and it was well woth it not having to restart
phones every 20 minutes.
James Key
From: ccie_voice-boun...@onlinestudylist.com
[ccie_voice-boun...@onlinestudylist.com] On Behalf Of Cristobal Priego
[cristobalpri
It is 95% of the CIR.
James
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of hasan khalife
Sent: Tuesday, March 03, 2009 6:41 AM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] frame-relay
frame-relay cir 729600
It all depends on what specific requirements you are given.
James
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Mike Louis
Sent: Friday, February 27, 2009 7:26 AM
To: Kumar, Narinder; maqsood; ccie_voice@onlinestudylist.com
Subject:
Mike,
Do a debug voice dialpeer all on the gateway and see if it is matching a
dial-peer. Sounds to me like it isn't .
Might also try using DNA and taking a look to see if it is being blocked or
showing as route this pattern.
James Key
From: ccie_voice-boun
Hasan,
Did you get this resolved?
Try restarting IIS/www services and see if that doesn't resolve it.
If this doesn't work, you could manually flip the IAQ flag within DC Directory.
James Key
From: ccie_voice-boun...@onlinestudylist.com
[ccie_voice-boun
in the other direction).
James Key
From: ccie_voice-boun...@onlinestudylist.com
[ccie_voice-boun...@onlinestudylist.com] On Behalf Of Cliff McGlamry
[cl...@mcglamry.net]
Sent: Tuesday, February 10, 2009 12:22 PM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice
Mark,
Thanks for the great explanation and guidance!
James Key
From: ccie_voice-boun...@onlinestudylist.com
[ccie_voice-boun...@onlinestudylist.com] On Behalf Of Mark Snow
[ms...@ipexpert.com]
Sent: Tuesday, February 10, 2009 8:22 PM
To: Cliff
Try removing all the codecs with the exception of g711u and g729r8 from your
conf and xcoder profiles.
From: hasan khalife [mailto:hasan_khal...@hotmail.com]
Sent: Monday, February 09, 2009 12:00 PM
To: James Key; ccie_voice@onlinestudylist.com
Subject: RE: [OSL | CCIE_Voice] ios xcoder
voice
Did anyone have a work around for this, or is it just a limitation?
Running into the same issue with the bandwidth total command.
James Key
From: ccie_voice-boun...@onlinestudylist.com
[ccie_voice-boun...@onlinestudylist.com] On Behalf Of Chris Parker
, guide us in the right
direction :-)
James Key
From: ccie_voice-boun...@onlinestudylist.com
[ccie_voice-boun...@onlinestudylist.com] On Behalf Of Ryan Trauernicht
[ryanstudyvo...@gmail.com]
Sent: Saturday, January 31, 2009 10:06 AM
To: OSL Group
Subject: [OSL
. With MGCP analog and
CAS, calls WILL be maintained. In the case of Switchover, calls will also be
preserved.
James Key
From: ccie_voice-boun...@onlinestudylist.com
[ccie_voice-boun...@onlinestudylist.com] On Behalf Of kamal yousaf
[lovingprin...@gmail.com]
Sent
If you have a route pattern pointing directly to a gateway, it will not be
available for route groups. I assume this is what is happening.
James Key
From: ccie_voice-boun...@onlinestudylist.com
[ccie_voice-boun...@onlinestudylist.com] On Behalf Of Erwan Erwan
I have also seen this on Pod 20 a few times. To fix, I have always changed the
tftpath in the services parameters referred to in your link and rebooted the
server.
James Key
From: ccie_voice-boun...@onlinestudylist.com
[ccie_voice-boun...@onlinestudylist.com
Are you actually using the UNC share name? the path listed in the error
message \10.20.200.21\TFTPPATH is missing a \it should be
\\10.20.200.21\TFTPPATHfile://\\10.20.200.21\TFTPPATH
James Key
From: anil batra [anil...@yahoo.com]
Sent: Friday, January 16
$75. If you are
going to be using PL racks a lot, I would reccomend going ahead and purchasing
it. Also works nice for running multiple instances of IPblue for your own lab
if you have to access your equipment remotely.
James Key
From: ccie_voice-boun
Jeremy,
you can use the Windows time service W32time or Net.exe.
On Unity, open up cmd and type net time
\\ip_address_of_time_serverfile://\\ip_address_of_time_server /set /y
Then you can copy this command and go create a scheduled task having it run
daily.
James
Hi Asif,
The IPMA assistant console isn't located on the plugins page. Here is the link
http://IPMA server/ma/Install/IPMAConsoleInstall.jsp
This link can be found within the features and services guide for 4.1.3 or you
can just memorize ii like some do here :)
James
From:
...@gmail.com]
Sent: Monday, December 29, 2008 1:57 PM
To: James Key
Cc: asif raza; ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Facing problem with IP manager Assistant
What SR version for CM is on the lab I just looked at mine can I have
assisstant console plugin under
to find the link in documentation
fast. My BLS solutions shows using the Doc CD to install assistant console.
James
From: Ryan Trauernicht [mailto:ryanstudyvo...@gmail.com]
Sent: Monday, December 29, 2008 2:12 PM
To: James Key
Cc: asif raza; ccie_voice@onlinestudylist.com
Subject: Re: [OSL
...@yahoo.com]
Sent: Monday, December 29, 2008 4:01 PM
To: James Key; Ryan Trauernicht
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Facing problem with IP manager Assistant
I mean how to reach the location where I can download AC application please..
--- On Tue, 12/30/08, anil batra
I am confused now :-) maybe Mark or Vik could give us their explanation and
recommendations.
BTW, Merry Christmas all!!
James
From: jeremy co [jeremy.coo...@gmail.com]
Sent: Thursday, December 25, 2008 6:33 AM
To: James Key
Cc: ccie_voice
Jeremy,
As Scott stated below, it depends. It depends on the requirements given to
you. I wouldn't assume that it is ok never to use B-channel maint on an IOS
gateway. Myself, I have always made it a habit to configure it. You are most
likely going to be in service parameters anyways at
Great point Mike! I actually found myself doing exactly the same thing
on my last attempt. Not reading the question all the way through. I
think part of my problem was that I have been going through the VOl 3
labs so many times I know the questions and find myself not reading them
completely.
I believe that checkbox is only on versions 4.2(1) and later. That
feature isn't supported on 4.0(5) but someone here may have a
workaround.
James
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Ryan
Trauernicht
Sent: Monday,
Tony,
Also make sure you have the following configured:
voice service voip
allow-connections h323 to sip
allow-connections sip to h323
James
From: Tony reyes [mailto:treye...@yahoo.com]
Sent: Monday, December 22, 2008 4:29 PM
To: James Key; ccie_voice@onlinestudylist.com
Jeremy,
During SRST, Internal MOH will not work. Only MOH to the PSTN.
Internally, you will only hear tone on hold. Same holds true for CME
also. I believe this is a limitation with IOS.
James
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com]
Thanks Christian for the clarification!
james
-Original Message-
From: Christian Hennrich [mailto:christian.hennr...@intact-is.com]
Sent: Friday, December 19, 2008 11:15 AM
To: James Key
Cc: jeremy co; ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Does MOH during SRST
I would agree to round up also, but I would also suggest you clarify
with the Proctor just to make sure.
James
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Shadab
Abbasi (moabbasi)
Sent: Sunday, December 14, 2008 8:38 PM
To: Ryan
I don't believe Alias with work if you have dialplan-pattern defined.
James
-Original Message-
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of anil batra
Sent: Monday, December 15, 2008 1:13 AM
To: Ryan Trauernicht
Cc:
Congrats!!
Might want to hold off telling your wife you are thinking about another
IE for awhile J
James
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Ricardo
Arevalo
Sent: Friday, December 05, 2008 6:49 AM
To: ccie_voice@onlinestudylist.com
Subject: [OSL |
PROTECTED]
Sent: Friday, December 05, 2008 8:00 AM
To: James Key
Cc: Ricardo Arevalo; ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Finally i got it! CCIE # 22885
James,
Yeah, I made the mistake of saying I was done for at least 12 months
after I passed #2, and then when I picked up
Juan,
Make sure you completely remove the frame-relay interface-dlci XXX and then
apply the frame-relay interface-dlci xxx ppp virtual-template1.
James
-Original Message-
From: [EMAIL PROTECTED] on behalf of ALI JAMAL
Sent: Sun 11/30/2008 3:06 PM
To: ccie_voice@onlinestudylist.com
Ali,
Sorry for referring to you as Juan in earlier post. Too many things going on
at once!
James
-Original Message-
From: [EMAIL PROTECTED] on behalf of James Key
Sent: Sun 11/30/2008 4:18 PM
To: ALI JAMAL; ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Problem : MQC
Hi Rob,
I think you can only do ip addresses when networking CUE to CUE. CUE
to Unity requires DNS.
James
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of rob
Sent: Monday, November 24, 2008 11:46 AM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice]
No one knows for sure, but the rumor going around is june/july of 09.
-Original Message-
From: [EMAIL PROTECTED] on behalf of Phillip Day
Sent: Tue 11/18/2008 4:36 AM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] CUCM v6
Hi,
Does anyone have an idea of when the lab
Are you using the MGCP bind commands? If so, try removing these and
re-add.
James
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Erwan Erwan
Sent: Thursday, November 13, 2008 2:57 PM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] MGCP gateway not
There shouldn't need to be a reason to do an alias static. Your CME
e164 numbers will register with the GK already.
James
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Chris
Parker
Sent: Thursday, November 13, 2008 4:57 PM
To: Turpin, Mark
Cc:
then do a no-reg for those DNs you don't want to register.
ephone-dn 1
number 4001 no-reg
James
-Original Message-
From: Chris Parker [mailto:[EMAIL PROTECTED]
Sent: Thu 11/13/2008 6:32 PM
To: James Key; Turpin, Mark
Cc: ccie_voice@onlinestudylist.com
Subject: RE: [OSL | CCIE_Voice
Had an issue where all my DNs on cme would register to Gatekeeper. I
had no-reg defined for each number, and it still would always register
those numbers. Doing a no gateway and then gateway never resolved. Did
I miss something somewhere? I never have run into this issue during my
studies.
: Greg Miglucci (gmiglucc) [mailto:[EMAIL PROTECTED]
Sent: Wed 11/12/2008 7:10 PM
To: James Key; ccie_voice@onlinestudylist.com
Subject: RE: [OSL | CCIE_Voice] Gatekeeper E164 registration
Verify no-reg and then do no gateway gateway on the CME router.
From: [EMAIL
What is the best way to block calling name on certain route patterns, while
still allowing it on others? Example: hq local send calling name + number, hq
international just calling number.
thanks,
James
NOTICE: This electronic mail message and any files transmitted with it are
intended
Thanks Michael. I can't believe I over looked this. So simple.
-Original Message-
From: Michael Shavrov [mailto:[EMAIL PROTECTED]
Sent: Wed 11/12/2008 8:38 PM
To: James Key
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Block calling name
Block calling nameOn
If not explicitly told to account for users using an access code for emergency
numbers, should you still go ahead and add a 9.911 RP anyways, and do you think
it will count against you for doing it? I know it has been said that there is
no penalty for over configuration, but just want to make
Hi Jeremy,
I don't believe that is the case with the GUI being prohibited. I have yet to
sit the lab (first attempt is next monday), but from what I have read from
posts, you are allowed to use the GUI. I would suppose you may have a
restriction on one of your tasks where you are prohibited
help.
James
-Original Message-
From: Vik Malhi [mailto:[EMAIL PROTECTED]
Sent: Mon 11/3/2008 11:40 PM
To: James Key; Alex; ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] IPMA with MWI for Manager phone
H. I cpould try and be really smart and say look ensure the ³X
I actually had the same exact issue in a lab yesterday. Never was able to
resolve and moved on. In a lab again today so going to see if i can get it
work.
James
-Original Message-
From: [EMAIL PROTECTED] on behalf of Alex
Sent: Mon 11/3/2008 9:06 AM
To:
Have you tried restarting the CCM service again or just rebooting the servers?
james
-Original Message-
From: [EMAIL PROTECTED] on behalf of James Jung
Sent: Mon 11/3/2008 2:56 PM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] CCM AAR
Hi guys
I tested AAR and worked
it the suggested way. Any
thing else I may look at?
thanks for your help,
James
-Original Message-
From: Vik Malhi [mailto:[EMAIL PROTECTED]
Sent: Mon 11/3/2008 11:36 AM
To: Alex; James Key; ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] IPMA with MWI for Manager phone
flag from False to True.
James Key
Network Engineer
Gladiator | Matrix Network Services
Jack Henry Associates Inc.
2131 E. Primrose Suite H
Springfield, MO 65804
Phone: +1.417.890.4294
Fax: +1.417.890.4259
www.jackhenry.com
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL
Jeremy,
On your Gatekeeper controlled trunk, make sure that Wait for Far End
H.245 Terminal Capabilities Set is NOT checked. When an IPIPGW is
involved, everything has to be hardcoded and H.245 negotiation doesn't
place nice with IPIPGW in 12.4 mainline IOS.
James
From: [EMAIL
. Has anyone else run into this and what is the best way
to troubleshoot/resolve?
James Key
NOTICE: This electronic mail message and any files transmitted with it are
intended
exclusively for the individual or entity to which it is addressed. The message,
together with any attachment, may
Someone shared this technique for finding service URLs a little while
back. Works well.
1. In Callmanager web page, open the Help (Help Contents and Index)
2. Switch to Search tab
3. Search for the work devicename
You will get 5 links to documents.
* Second link has URL for EM
*
Had an issue with B-ACD yesterday in a lab. After making
configurations, if I placed a call into br2, the call would be
immediately get disconnected. I then got this message on BR2 router:
Sep 21 20:15:33: %IVR-6-APP_INFO: TCL B-ACD: B-ACD Service
Terminated
I tried several
What are you seeing when you do a show isdn stat? PRI up?
-Original Message-
From: [EMAIL PROTECTED] on behalf of jeremy co
Sent: Thu 9/11/2008 1:53 PM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] Wired problem: dial-peer status down
Hi,
my status of dial peer is
I believe IPBlue is available on the Unity box.
James
From: [EMAIL PROTECTED] on behalf of Antonio Cunanan
Sent: Wed 9/10/2008 7:15 AM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] Access to IPC/Softphone in Proctor Labs
?
Hi Guys,
I am
?
Congrats!!
From: [EMAIL PROTECTED] on behalf of Devildoc
Sent: Tue 9/9/2008 2:37 PM
To: CCIE Voice Online Study List
Subject: [OSL | CCIE_Voice] Just Got My CCIE #21995
Hello All,
Finally, I did it! I just passed my CCIE test yesterday. I'd like to thank
This is checked for both audio sources. being used.
From: Ricardo Arevalo [mailto:[EMAIL PROTECTED]
Sent: Tue 9/2/2008 10:02 AM
To: James Key
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] PSTN call issue
?
Try checking play continuously
That did it! thanks Johathan. I need to read up on what that command does.
Is it always needed for MGCP?
James
From: Jonathan Charles [mailto:[EMAIL PROTECTED]
Sent: Tue 9/2/2008 10:51 AM
To: James Key
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL
I am interested in this also.
Thanks!
James
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of yung hung
Sent: Wednesday, August 27, 2008 11:41 AM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] EzVPN PIX to Proctorlabs
Hello,
I was
Is it possible to have multiple corp directories in callmanager where
only certain phones can view a certain directory, and others can view a
different directory?
James
NOTICE: This electronic mail message and any files transmitted with it are
intended
exclusively for the individual or
Codec: rfc2833 dtmf, Maximum Packetization Period: 30
James Key
Network Engineer
Gladiator | Matrix Network Services
Jack Henry Associates Inc.
2131 E. Primrose Suite H
Springfield, MO 65804
Phone: +1.417.890.4294
Fax: +1.417.890.4259
www.jackhenry.com http://www.jackhenry.com
, Maximum Packetization Period: 60
Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30
James Key
Network Engineer
Gladiator | Matrix Network Services
Jack Henry Associates Inc.
2131 E. Primrose Suite H
Springfield, MO 65804
Phone: +1.417.890.4294
Fax: +1.417.890.4259
Do you have call application alternate default configured under global
config mode?
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of cisco.voip
Sent: Wednesday, August 13, 2008 11:59 PM
To: Jonathan Charles
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] SRST
Congrats!
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of ovais Iqbal
Sent: Monday, July 14, 2008 8:15 PM
To: OSL CCIE Voice Lab Exam
Subject: [OSL | CCIE_Voice] Nailed it down
Dear All,
Very glad to announce my Voice CCIE # 21482, got it today in 3rd
attempt.
86 matches
Mail list logo