Got CUCM 8.0 configured with a SIP trunk for PSTN calls. I've got Media
Termination Point Required enabled on the trunk but I've confirmed that CM
is not sending any SDP information to the PSTN, which is what they are
expecting. What am I missing?
Thanks,
Mark
Hey, Tatiana. Have you tried using the IVR?
http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/6901_6911/8_0/english/admin/guide/6911net.pdf
Thanks,
Mark
On Fri, Feb 4, 2011 at 7:18 AM, Tatiana Oliveira
tati_olivei...@yahoo.comwrote:
Hello guys,
Someone know how to enable Span to PC
All,
I'm trying to determine what digits the telco is sending me on an EM
circuit. Is there a good debug I could run that can display this
information? It's controlled by MGCP, also.
Thanks,
Mark
___
For more information regarding industry leading CCIE
?
My 2 Cents..
- Basant
On Tue, Jan 4, 2011 at 5:16 PM, Mark Davis davismar...@gmail.comwrote:
How do I pass a called number through an ATA 187 analog connection?
This is in regards to the fax server on an old PBX that is currently
connected using two analog ports. There are multiple
How do I pass a called number through an ATA 187 analog connection? This is
in regards to the fax server on an old PBX that is currently connected using
two analog ports. There are multiple DIDs that translate to different
extensions that then get forwarded to a hunt group with the two analog
I'm trying to add an additional integration with Unity Connection
7.1.3ES26.32900-26 via a DMG2060DTI running 6.0.121 application code and
T1E1_MR17_02 DSP firmware using SMDI. We have tried to follow the
application notes for this, but the SL100 is showing system busy on the SMDI
link. We have
I want to create a 3 second delay for calls that hit the 911 route
pattern in Callmanager 4.x.
The only way I think I can do this would be to do a 911. route
pattern, and then set the digit timeout systemwide at 3 seconds.
Doing this would affect all phone dialing, however, and I'd rather not do
://www.IPexpert.com
On Thu, Apr 2, 2009 at 9:57 AM, Mark Davis davismar...@gmail.com wrote:
I want to create a 3 second delay for calls that hit the 911 route
pattern in Callmanager 4.x.
The only way I think I can do this would be to do a 911. route
pattern, and then set the digit timeout
). If you check the Urgent Priority box you interrupt the interdigit
timing when the match is made and the call is sent when the digits are
matched.
Larry Hadrava
CCIE #12203 CCNP CCNA
Sr. Support Engineer – IPexpert, Inc.
URL: http://www.IPexpert.com
On Thu, Apr 2, 2009 at 3:55 PM, Mark Davis