As for the original question, it should be possible to return a label to
whatever target on UCM in the ICM script. Am I missing something non
trivial?
On Apr 6, 2014 1:19 PM, Chrysostomos Christofi ch.christ...@logicom.net
wrote:
Hi
If you have CUE you can achieve this task in the same way
Here is a simpler solution.
Create a new partition on unity and move all the users you want disabled
there. Don't add it to any search space and you are done
On Mar 6, 2014 4:15 PM, Christian Holst c...@netdesign.dk wrote:
If people are not able to leave voice messages (no forward) then MWI
Jtapi/tapi interfaces are northbound interfaces which are on top of the CTI
layer.
Taking the example of UCCX, UCCX can sync with ucm and download jtapi
libraries from ccm. Its built in jtapi client uses those libraries to
communicate with CTI on the ucm server.
The term rmjtapi refers to the
Check your retry interval on device - gatekeeper
On Aug 10, 2013 6:42 PM, Karen Johnson karen.johnson...@yahoo.ca wrote:
when we shut Gatekeeper, it always take time to go back up.
is there any command to speed it up ?
K
___
For more information
Ctigwy user is for desk phone control.
If you don't need cupc to work in desk phone control mode, no need for this
user.
On Jul 25, 2013 12:51 AM, Devakanth Gangavarapu devakanth2...@gmail.com
wrote:
Hi
Cisco Presence solution is not integrated with JTAPI / TAPI
It either uses SCCP or SIP
It
Its most likely a firewall blocking rtp. Cannot be routes as the signaling
is OK (as you have ring back)
On Jul 24, 2013 9:20 PM, Alex Mendoza aa.mend...@icloud.com wrote:
Must check your routes
Try pinging the ip phone's address from CUPC PC.
If it is unsuccessful do a tracert, to see
Ram,
If i remember correctly, the catch is that the AAR mask on the CTI port has
to point to the RP. so your aar mask on CTI port needs to be 4000 not 400x
On Jul 10, 2013 5:39 PM, Ramcharan Arya ramcharan.a...@gmail.com wrote:
Hi Piyush,
I assigned HQ device pool and location setting on CTI
Check your redirect CSS on route point and CTI port
On Jul 4, 2013 2:27 PM, Karen Johnson karen.johnson...@yahoo.ca wrote:
i script Call redirect to extension 5001 when press 1, by hard code and
variable, both of them did not work.
Usually pretty simple and just work, but not this time.
Yes.
On Jul 1, 2013 9:45 PM, Kapuria, Aman aman.kapu...@team.telstra.com
wrote:
Hey Guys,
** **
Do we have access to the Help page within the CUCM in lab? Do they block
it? Can you click on service parameters to get the description?
** **
*Aman Kapuria** *
** **
I second that. Excellent experience at RTP. Wasn't impressed with the
proctors at SJC.
On May 1, 2013 7:52 PM, STEPHEN FREEBERG sfreeberg...@gmail.com wrote:
RTP exams begin at 7:15 am, You should arrive no later than 7:00 am.
David Blair is the proctor and in my opinion is the best proctor I
It's quite trivial in UCM. Just configure plar
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_0_2/ccmcfg/b03dn.html#wpxref85834
Sent from my iSnuff
On Oct 19, 2012, at 6:21 PM, Dan Quinlan (daquinla) daqui...@cisco.com
wrote:
Forget my message below. Actually, ! has to match a
Hugo,
I would recommend you spend the first 15 minutes reading through the exam and
identify questions that may influence others. At the end of exam how you
achieve a task is irrelevant. It's only the end result that matters
Sent from my iSnuff
On Oct 1, 2012, at 7:41 PM, Barrera, Hugo
You can try setting all the service params to default from the gui.
-Pavan
On Sep 22, 2012, at 15:14, chase mergenthal cm3_...@hotmail.com wrote:
I didn't see there there was a carriage return when I copied and pasted to
enable IPCC parameter...
-Chase Mergenthal
I think cor can offer a good solution for this. Assign a separate cor group to
each dialpeer say cust1 and cust2 in both inbound and outbound directions
-Pavan
On Sep 13, 2012, at 17:45, John John john_ccie2...@yahoo.com wrote:
Dear All,
We have two sipt trunk for 2 comapany
).
Forwarded calls get routed to Voicemail as the CF CSS is set to use
With Configured CSS and the CSS for Forwarding has the Voicemail CSS
--
- Pavan
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
I am using a SIP based integration not the legacy SK so no hunt pilot.
Just a route pattern to the SIP Trunk
-Pavan
On Tue, Sep 4, 2012 at 10:24 AM, William Affeldt
william.affe...@yahoo.com wrote:
Check the hunt pilot. What partition is it in?
Sent from my iPhone
On Sep 4, 2012, at 8:03 AM
Stuart,
I want all my users to be able to access voicemail using the voicemail button.
I want to prevent users from picking up the phone and dialing the voicemail
pilot from keypad.
Stuart Geoghegan stuartmgeoghe...@yahoo.co.uk wrote:
Pavan,
Why don't you remove the enterprise device
but thats
just being too wishful ;)
Again this is not based on any insider info and is pure unadulterated
speculation
-Pavan
On Tue, Sep 4, 2012 at 1:25 PM, Ramcharan Arya ramcharan.a...@gmail.com wrote:
Hi,
I checked https://www.ipexpert.com/Cisco/CCIE/Voice/Bootcamps their
website also
Thank you guys.
I was able to recover using Ryan's suggestion after resetting the password.
-Pavan
On Mon, Aug 27, 2012 at 7:41 AM, Ryan LaFountain (rlafount)
rlafo...@cisco.com wrote:
Hi Pavan,
You can use the Application User that was set during install to get into
the GUI at any time
to get into the appadmin gui.
--
- Pavan
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
I would put it as the sip cme source interface.
-Pavan
On Aug 23, 2012, at 11:38, Randall Crumm rrcr...@yahoo.com wrote:
Hello,
If not specified, which interface is it better to configure as the option 150
IP address in the DHCP pool for CME phones?
Thanks,
Randall
mode in sip proxy service params on cup and restart cup server
-Pavan
On Aug 9, 2012, at 13:37, Jason Murray murr...@usa.com wrote:
Nevermind seems to be a bug with the software. I choose Deskphone Mode and
nothing happens, close CUPC and reopen and it comes up with Deskphone mode.
Happens
Take a look at this. There is no service URL.
http://blog.ipexpert.com/2010/11/17/setting-up-phone-view/
Sent from my iSnuff
On Aug 1, 2012, at 9:29 PM, Krishna vinayak_...@yahoo.com wrote:
hi folks,
can any one help me out with the service url for phoneview for ip phones in
cucm
Can you ping it from your test pc?
I had a similar problem when cue was in SRST and nothing I tried worked
Sent from my iSnuff
On Jul 4, 2012, at 10:21 PM, Krishna vinayak_...@yahoo.com wrote:
hi folks,
I couldn't able to understand why the CUE giving me the dead air though after
the
with Unity connection from CME ?
--
- Pavan
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
) but the call doesn't connect.
If i take the CTI ports out of the partition, everything works perfectly.
TIA
--
- Pavan
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE
and looking for a job? Check out
www.PlatinumPlacement.com
--
- Pavan
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
Thanks Gurpreet, Dan Krishna.
This is now fixed. As Dan mentioned the CSS of caller matters.
==
When a CTI Route point, redirects the call to the CTI port, the CSS of
the device that calls the Route point is used to search for the CTI
Port.
==
From: Pavan K pav.c...@gmail.com
Date: Mon, Jun
I havent used 7960 so cant comment on icon.
Sip phones off hook status will be known to cme only when the invite comes in
to cme which would be after a digit press (if using kpml) or a pattern match (
if using vr dialplan)
-Pavan
On Jun 9, 2012, at 10:55 PM, Krishna vinayak_...@yahoo.com
to enter a freeform number.
Any trick to get this to work ?
--
- Pavan
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
Correct. Barge however will not work. Only cbarge/conference will.
Also Be aware software CFB is g711 only.
Sent from my iSnuff
On Apr 29, 2012, at 4:49 AM, Ken Wyan kew...@gmail.com wrote:
If we disable built-in-bridge of a phone , it uses conference resources
available through MRGL for
Thanks Baktha. That did it.
-Pavan
On Tue, Apr 10, 2012 at 10:56 AM, Baktha Muralidharan
muralic...@gmail.comwrote:
show timezone list
set timezone
but I don't think you need to worry about, as far as times displayed on
the phones. DTGs will take care of that.
thanks,
/Baktha
Incorrect. Hyderabad is a city :)
There are a bunch of issues with TRAI regulations in INDIA. Cisco IT has a case
study on cisco.com
-Pavan
On Mar 13, 2012, at 2:37 PM, Kumar Vishal (kvishal) kvis...@cisco.com wrote:
Hi Mike,
Hyderabad is a state and not a country. Better use India Dial
Its basically join softkey.
On Sep 21, 2011, at 10:30, Mann Chaddha mann.chad...@gmail.com wrote:
Hi Guys
Does anyone know what construct JAL uses while bridging 2 calls on different
Line Buttons?
I ask as I need to plan India specific dial plan which shall restrict
bridging of VoIP
Michael,
Regions never restrict based on codec, they restrict based on bw req per call.
Since g711 g722 both consume same bw and g722 has a higher preference, phones
will negotiate to g722 if the enterprise param is not changed.
On Jun 10, 2011, at 16:00, Randall Crumm rrcr...@yahoo.com wrote:
.
-pavan
On May 23, 2011, at 0:53, Karim Hany karimhan...@gmail.com wrote:
Hi,
G.729r8 is configured under the transcoder profile, this is i'm 100% sure
about, and the transcoders are registered with CUCM.
I have HQ-IOS-MRGL which has HQ-IOS-MRG and this includes hq-xcoder and the
same
Did you change settings in the default system transfer restrictions table?
By default all dns are blocked
On Nov 24, 2010, at 5:39 AM, ShinGei Yong shingei.y...@gmail.com wrote:
Hi,
I'm currently facing the problem in which UC response with You cannot be
transfer to this number... during
Assign it cti enabled and cti control of all devices. No need to associate any
device to it.
Also for your end user you will need cti enabled
-pavan
On Nov 15, 2010, at 10:07 AM, Mann Chaddha mann.chad...@gmail.com wrote:
Hi Guys
I somehow am not able to recall the Roles for the CTIGW User
If you select a date and go to the next page it will throw an error if you are
not allowed
On Nov 10, 2010, at 12:19 AM, rsmail...@solcon.nl rsmail...@solcon.nl wrote:
Well,
that's why i am wonering.
it let's me take it on 22 and 24
the other date's are full.
the 22 is for sure not after
I assume your subscribe css are all set correctly and you restarted ccm service
?
On Nov 10, 2010, at 4:43 PM, Roig Borrell, Francesc Xavier
francesc.ro...@tecnocom.es wrote:
Hi All!!
Working with lab 13 and blf call list I’ve found and issue that is driving me
crazy!!
I
I did reboot everything.
I kind of isolated the issue to frame relay links.
Thats the only thing that makes sense at this point.
Any special config for mcast over fr?
I tried nbma-mode and it didnt make any difference
On Nov 10, 2010, at 4:21 PM, Prashant Patel prashantpatel...@gmail.com wrote:
G711
On Nov 10, 2010, at 3:07 PM, ccieid1ot ccieid...@gmail.com wrote:
What's the region set to for the SB to MOH?
On Tue, Nov 9, 2010 at 6:01 PM, Pavan K pav.c...@gmail.com wrote:
Multicast MOH from CCM. No Spoofing.
For HQ site, MMOH stream perfectly
For Branch sites, on the Branch
To rule out css, can you put the problem phones in the null partition and see
if you still have the issue
On Nov 10, 2010, at 5:15 PM, Roig Borrell, Francesc Xavier
francesc.ro...@tecnocom.es wrote:
Hi!!
Yes all the phones have the same subscribe css with phones partition. And
also
Is there a way to get MWI for broadcast messages (sent using Broadcast
admin)
The message is in the mailbox but no MWI for these messages.
MWI works normally in other cases.
--
- Pavan
___
For more information regarding industry leading CCIE Lab
___
For more information regarding industry leading CCIE Lab training, please
visit www.ipexpert.com
--
- Pavan
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
music after
being on hold for 5 mins.
Phones are SK registered to CCM. CCM counters look good (show mcast stream
active)
pim is configured for sparse-dense-mode on all serial subifs, vlans
loopbacks.
IOS is 12.4 (20T2)
--
- Pavan
___
For more
an additional DHCP configuration in BR1 site ?
If so, is there any way to make the HQ DHCP primary and BR1 DHCP as fallback
when the HQ DHCP pool is in-accessible.
How do people deal with this in real world (other than having local DHCP on
BR1) ?
--
- Pavan
Thanks for all the input folks.
Yes i did notice that reseting a phone from CLI causes the phone to lose its
IP.
-Pavan
On Fri, Nov 5, 2010 at 5:31 PM, George Goglidze gogli...@gmail.com wrote:
nobody will keep an IP if there is no DHCP present.
Neither Phone, nor PC (Win/Linux/Mac
Agreed.
My question was can it be done if DHCP for Branch1 was scoped from HQ.
Looks like it cannot.
-Pavan
On Fri, Nov 5, 2010 at 6:07 PM, Shrini linuxbos...@gmail.com wrote:
IOS DHCP on Br1 router is required.
You will provide option 150 as CUCM IP address under DHCP pool.
Also you
You need to add a translation profile on outgoing side of pots dp.
On Sep 1, 2010, at 6:23 PM, vcciev vcc...@gmail.com wrote:
For the calling name, I verified with local outgoing call. But it is
international call having problem.
For the + sign, I already added back via a voice
on ccm. Careful this might break any
teho config that you might be sending to ccm.
- Original Message -
From: ccie_voice-boun...@onlinestudylist.com
ccie_voice-boun...@onlinestudylist.com
To: Pavan pav.c...@gmail.com; ccie_voice-boun...@onlinestudylist.com
ccie_voice-boun
*,dac=0)|CLID::StandAloneClusterNID::172.16.30.201CT::0,0,0,0.0IP::10.10.3.1DEV::LVL::DetailedMASK::0800
Regards
-Pavan
On Sat, Aug 28, 2010 at 4:10 PM, Warren Heaviside (wheavisi)
wheav...@cisco.com wrote:
When interpreting SDI traces and you see NoPotentialMatchesExist it's
a bit misleading
Can you post ccm sdi trace.
That should point to the problem in a jiffy
On Aug 27, 2010, at 7:21 PM, dcrayto...@comcast.net wrote:
Hello guys,
I am struggling with a gatekeeper scenario.
Basically, the lab calls for HQ, BR1, and BR2 to use a GK to route internal
calls via 4 digits.
In such cases grabbing detailed SDL SDI traces would immensley help.
Without them it is difficult to guess
Sent from my phone
On Aug 22, 2010, at 3:46 PM, CCIE Voice cc...@corb.net wrote:
Tried with 1 sip phone and 1 sccp phone. Route pattern was set to route.
Thanks for the ideas though.
It means layer 3 is being backhauled to ccm bcoz you have an isdn bind-l3
ccm-manager on the interface.
Consequently router may not have any/correct information about layer 3.
Sent from my phone
On Aug 17, 2010, at 4:23 AM, Pithog Oil pithog...@yahoo.com wrote:
Oh i think my questtion was not
: 90 10
priority : 10 0
threshold1: *20* 100
threshold2: *10* 100
--
- Pavan
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
I have not played with it on cme but i know for sure it cannot be changed in ccm
Sent from my phone
On Aug 7, 2010, at 11:44 AM, Trying 2nd CCIE dukelon...@gmail.com wrote:
Hi guys,
I've noticed that when CUCM is up and cbarge is used, the words To
conference appear on the phones.
Take a look at detailed smtp traces on cuc. Please paste them and i can help.
Sent from my phone
On Aug 7, 2010, at 10:43 AM, Erwan Erwan e_er...@yahoo.com wrote:
yes, i use prcotor lab
mx record is on DNS
--- On Sat, 8/7/10, Miron Kobelski findko...@gmail.com wrote:
From: Miron
I tried installing ccm 7 on vmware server 2 on top of ubuntu 10 (64 bit) couple
of times and could never get install to complete successfully.
On the other hand,
I have used esxi and vmware workstation without any problems
Sent from my phone
On Jul 20, 2010, at 12:06 PM, akash patel
My intent was to use gns3.
Sent from my phone
On Jul 20, 2010, at 1:56 PM, Akash akashapa...@yahoo.com wrote:
Thanks Pavan for sharing your experience. Were you using dynamics as well on
the server?
Do you know good deal for suffient hardware requirements?
Akash Patel
Presales
servers are heavily loaded.
Just generic hardware but I do spread the load over the two servers
I do run dynamips but not usually at the same time
Graham
On 20 Jul 2010, at 19:56, Akash akashapa...@yahoo.com wrote:
Thanks Pavan for sharing your experience. Were you using dynamics as well
You dont need rhel. You can install vmware esxi which install directly on the
hardware.
I am not familiar with t310,
personally i use mcs 7845h2 servers for my lab with 6g ram and a nas for disk
Sent from my phone
On Jul 9, 2010, at 7:23, akash patel akashapa...@yahoo.com wrote:
This might
IS anybody out there using MLPP on either callmanager or CME in production. If
you are using it, what criteria do you use for preemption.
I understand DoD uses it but trying to see if anybody is using it on the
Commercial / Enterprise front.
Sent from my phone
Thats really wierd from ccm perspective
Can you check your dbreplication status, looks like the sip phones did not get
replicated to sub.
You can check it from rtmt- database summary
Sent from my phone
On Jun 30, 2010, at 5:55, Duncan Hamilton-Walker dun...@rosethorn.plus.com
wrote:
Update
You will need to start ccm service in sub for it to show up in cm group
Sent from my phone
On Jun 29, 2010, at 8:40, jeremy co jeremy.coo...@gmail.com wrote:
Hi,
I installed both Subscriber and publisher both with same version of 7.0.1 on
Vmware. ( both added as CUCM not CUCMBE). Show
You are mistaken. Its not changing the threshold.
The first line means that cos 5 will be assigned to q1 upto its third threshold.
The 3750 command reference is a better book if you want to ubderstand the
parameters
Sent from my phone
On Jun 29, 2010, at 18:52, Erwan Erwan e_er...@yahoo.com
Daniel,
Before you go check replication, check to see if cups is even requesting the
correct config xml file.
Replication could only be a problem when cups tries to register to ucm and ucm
rejects the register request
Sent from my phone
On Jun 26, 2010, at 16:52, Roger Källberg
You will need a hardware mtp (i.e dsp / ios sw ) not the one provided by ucm
Sent from my phone
On Jun 26, 2010, at 18:47, David Lee d16...@gmail.com wrote:
Hello,
I am at a lost. I got most of this section working. I can resume a call if
the hold was initiated by an UCM phone or the
I dont think There is a way to configure redundancy for em. You can
activate on pub/ sub but only use one of tgem.
Let me know if i am mistaken.
Sent from my phone
On Jun 15, 2010, at 7:26 AM, Angel Perez gorr...@hotmail.com wrote:
Hi:
Are you sure? I'm logged right know to UCM cluster and
I ve had the exact same problem couple of days back.
You can fix it by changing the smtp domain name in ucon and rebooting
it.
Sent from my phone
On Jun 11, 2010, at 7:49 AM, Angel Perez gorr...@hotmail.com wrote:
Hi:
I've the following DNS configuration:
cue- cue.cisco.lab
cuc-
)
(Disadvantage : windows time does not seem to sync up since only app is
synced)
--
- Pavan
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
else command we required to configure
Thx
Dani
On Fri, Jun 11, 2010 at 9:28 AM, Pavan K pav.c...@gmail.com wrote:
When configuring NTP on the UCCX server, i see two approaches when asked
to configure NTP.
Which way would you go ?
- Configure NTP on the Windows OS (Using windows
___
For more information regarding industry leading CCIE Lab training, please
visit www.ipexpert.com
--
- Pavan
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
appropriately.
--
- Pavan
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
you generally use them if you are doing NTP authentication and using ACL to
control who your NTP peers are.
Doesn't hurt to add but technically they are not required.
I usually add them
-Pavan
On Fri, Jun 11, 2010 at 10:31 AM, Dani Bug daniyal.vo...@gmail.com wrote:
thx i forgot to add
. It is not integrated into AD.
I can view status between two CUPC users (i.e status of user1 in
CUPC2 and vice versa
If i create my own contacts (Local contacts) on CUPC, should i be
able to view their presence status ?
Subscribe CSS on SIP trunk has been set appropriately.
--
- Pavan
Hotmail: Trusted
Can you ping it. Did you issue a no shut?
Sent from my phone
On Jun 11, 2010, at 1:56 PM, Steve Denney (stdenney) stden...@cisco.com
wrote:
Working on Vol 2 Lab 2 Question 8.2.
When trying to session into the CUE, I get this error:
BR2-RTR#service-module service-Engine 0/0 sess
Trying
.
CSS for Routepoints and Ports is CSS-VM { PT-VM + PT-Phones }
Doesn't work
==
--
- Pavan
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
?
Brian
Sent from my Verizon Wireless Phone
- Reply message -
From: Pavan K pav.c...@gmail.com
Date: Wed, Jun 9, 2010 9:14 pm
Subject: [OSL | CCIE_Voice] CUE integration with CCM problems
To: osl osl ccie_voice@onlinestudylist.com
If i place all my CTI ports in the NULL partition everything
to it. Does it contain the route point partition?
Brian
On Jun 9, 2010 10:02 PM, Pavan pav.c...@gmail.com wrote:
No it does not have that partition.
Shouldnt the css of the route point be used when the call is
redirected to cti port?
Sent from my phone
On Jun 9, 2010, at 8:58 PM, bkvalent
= css_voicemail
works like a charm.
On Wed, Jun 9, 2010 at 10:14 PM, Pavan K pav.c...@gmail.com wrote:
If i place all my CTI ports in the NULL partition everything works,
If i put
them in PT-VM i get BUSY (CTI rejecting call).
Any additional CSS settings needed
Looks good as farvas i can tell.
Normally you would also enabl priority-queue on the interface
Sent from my phone
On Jun 8, 2010, at 8:20 PM, jammer jones jammerjone...@gmail.com
wrote:
Trying to understand this a little better. Cisco's documentation is
not written in very clear english.
Had to change domain name on Unity connection under SMTP settings and reboot
the box.
Restarting the Conversation Manager service (as instructed by the GUI)
didn't make any difference.
-Pavan
On Sat, Jun 5, 2010 at 7:41 PM, Pavan K pav.c...@gmail.com wrote:
Trying VPIM
Sending messages from
I can send messages as Private / urgent.
How does one send a secure message ?
I haven't been able to find any useful docs on this yet !
--
- Pavan
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Could you post gk config debugs for both the calls?
Sent from my phone
On Jun 6, 2010, at 5:36 PM, Dani Bug daniyal.vo...@gmail.com wrote:
Hi Guys,
i have issue with gatekeeper 4 digit call site to site i don't
know why my call some times going and sometime not
for example when i call
As others have pointed out it works fine on 7.0.
Just do a create cnf-files and reset if your SK phones dont show presence in
call-list.
-Pavan
On Sat, Jun 5, 2010 at 5:41 AM, Angel Perez gorr...@hotmail.com wrote:
Hi:
Sometimes you have to reload the gw to make presence works
hth
in your existing config, remove the h323gw bind source interface command
Sent from my phone
On Jun 4, 2010, at 9:50 AM, kobel findko...@gmail.com wrote:
I described from CUCM perspective: incoming calls - call from GW to
CUCM.
On Fri, Jun 4, 2010 at 4:43 PM, Ashar Siddiqui
Angel,
I use my own gear with vmware esxi and mva works great. I have tried
it atleast 10-15 times and never had a problem with it.
Sent from my phone
On Jun 3, 2010, at 3:33 AM, Angel Perez gorr...@hotmail.com wrote:
Hi Amy:
I'm working on my own gear, other people has experience similar
So in the lab exam do we have a cisco unified attendant console server ?
-pavan
Sent from my phone
On Jun 1, 2010, at 3:29 AM, kerboute kerboute
naoufal.kerbo...@cbi.ma wrote:
attendant console is end of life for CUCM 7
You need Cisco unified attendant console server
On 05/31/2010 11:28
Looks like our 4x machine got scrapped.
Does anybody have the plugin handy and
willing to provide me a copy if I can prove
that I have legitimate access to cisco software.
Sent from my phone
On Jun 1, 2010, at 6:01 AM, Pavan pav.c...@gmail.com wrote:
Correct. That was exactly why I
Thanks guys for the response.
I got access to the file.
I am using this for the lab exam so cant use third party.
-pavan
On Tue, Jun 1, 2010 at 1:43 PM, johan_claes fb922...@skynet.be wrote:
better to buy peter connect for reception,
cheaper and better,
johan claes
ccie#5437
Has any body tried this ?
--
- Pavan
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Does anybody have a link to / copy of the attendant console plugin ?
--Thanks in advance.
- Pavan
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
When using SIPGW and trying to transfer a call,
The INVITE with the diversion header reaches CCM but is getting blocked in
there due to a Top level domain mismatch.
Wondering if anybody got it to work ?
-Pavan
On Mon, May 31, 2010 at 1:55 PM, Pavan K pav.c...@gmail.com wrote:
Has any body
Looks like your ccm ran into code yellow.
You probably have a routing loop somewhere.
Sent from my phone
On May 30, 2010, at 11:17 AM, Erwan Erwan e_er...@yahoo.com wrote:
hi,
Does anyone experience this
- Call from HQ 5001 to 5600 (VM) said High Traffic Try Again
Later
I checked in
the loop ? what to verify ?
I am using proctor lab, and call to VM 5600, showing this
but other call is fine
--- On Mon, 5/31/10, Pavan pav.c...@gmail.com wrote:
From: Pavan pav.c...@gmail.com
Subject: Re: [OSL | CCIE_Voice] High Traffic ?
To: Erwan Erwan e_er...@yahoo.com
Cc: ccie_voice
Yes you can, as long as you know the dscp is correctly marked.
Sent from my phone
On May 30, 2010, at 1:45 PM, Mike Brooks 2xcci...@gmail.com wrote:
So I understand that, COS bits are set in the 802.1p field in an
802.1q encapsulated trunk but does it ever make sense to trust COS
on an
to normalize / re-classify the incoming call
(subscriber / national ) in this scenario ?
I am using CCM 7.0
--
- Pavan
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Uncheck wait for farend h245 caps on h225 trunk.
Sent from my phone
On May 28, 2010, at 7:52 PM, naoufal.kerboute
naoufal.kerbo...@cbi.ma wrote:
Hi guys,
I'm having a strange behaviour on my lab, I'm working on question
4.2 I'v configured everything GK, GK and gateway.
I can make calls
When interfacing with cube, you have to force ccm to send tcs as cube
doesn't do it. By default cme would initiate tcs when talking to ccm.
Tcs = terminal capability set.
Sent from my phone
On May 29, 2010, at 12:09 AM, naoufal.kerboute naoufal.kerbo...@cbi.ma
wrote:
Hi Pavan,
Thank you
1 - 100 of 111 matches
Mail list logo
