Hi,
i registered the publisher and subscriber to the gatekeeper.
Created the gatekeeper on the callmanager followed by a trunk.
on issuing sh gatekeeper endpoint, it show just the publisher as ben registered.
Anyone with an idea of what could be wrong
Also am not suppose to register the
-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of adefila seun
Sent: Wednesday, 22 April 2009 9:06 PM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] GATEKEEPER REGISTRTION
Hi,
i registered the publisher and subscriber
Hello,
the service is started on d sub
--- On Wed, 22/4/09, James Key j...@jackhenry.com wrote:
From: James Key j...@jackhenry.com
Subject: RE: [OSL | CCIE_Voice] GATEKEEPER REGISTRTION
To: adefila seun adefilabi...@yahoo.co.uk, ccie_voice@onlinestudylist.com
ccie_voice@onlinestudylist.com
, ccie_voice@onlinestudylist.com
ccie_voice@onlinestudylist.com, Key James j...@jackhenry.com
Date: Wednesday, 22 April, 2009, 4:04 PM
shut the pub see if sub can register..and see if phone still registered.
adefila seun adefilabi...@yahoo.co.uk wrote:
Hello,
the service is started
Hello All,
i have all the gatekeepers and trunks configured from the HQ to the Branch 2
with CME
When calls are placed from the HQ phones to the CME, it give number cant be
dialled pls contact your directory and try again later
Any one with similar expeience
Am i missing something out
)
HTH,
Otto
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of adefila seun
Sent: Viernes, 17 de Abril de 2009 03:47 a.m.
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] CME Calls
Hello All,
i have all
Hello,
Does anyone have the setup file for IPBlue compatible with VISTA.
the VTGO-PC-Lite-VEM-2.10.0 gives error when installing it on VISTA
Thanks
Hello,
whenever i restore the CUE to factory default and try to configure again , i
get this message when specifying the NTP server.
NTP has been properly configred
there is no firewall(firewall is off)
I could not reach 10.9.200.3 using NTP.
If 10.9.200.3 really is an NTP server, then
Hello all,
i get the folowing message
Apr 16 04:17:44: %CCH323-2-GTWY_REGSTR_FAILED: Gateway CME failed to register
with Gatekeeper HQ-RTR even after 2 retries
when it was initially configured it registered, anyone with an idea of why i
have this error message
thanks
.
- Original Message -
From: adefila seun
To: ccie_voice@onlinestudylist.com
Sent: Wednesday, April 01, 2009 8:27 PM
Subject: [OSL | CCIE_Voice] IPCC express
Hello,
was configuring IPCC express but the the ICD button is not
showing on the device association page thus
Hadrava
CCIE #12203 CCNP CCNA
Sr. Support Engineer – IPexpert, Inc.
URL: http://www.IPexpert.com
On Thu, Apr 2, 2009 at 1:04 AM, adefila seun adefilabi...@yahoo.co.uk wrote:
Hello,
i have IP Blue running in demo mode, and cant run two instances of the demo
version
Hello,
i have callmanager 4.1.3 and unity 4 in the version 2 lab
i have integrated the two with four ports 1601- 1604 and the voice pilot number
been 1600
after the integration, on the callmanger, the voiceport gets ip
addresses(showing its ok)
on the unity on the UTIM, the extension(2001-2004)
Hello,
Thanks for the response.
i used voicemail wizard so i configured all the pilot, hunt group and hunt list.
--- On Wed, 1/4/09, Tech Guy tech...@oletu.com wrote:
From: Tech Guy tech...@oletu.com
Subject: Re: [OSL | CCIE_Voice] Unity integration
To: adefila seun adefilabi...@yahoo.co.uk
Hello,
was configuring IPCC express but the the ICD button is not showing on the
device association page thus resources are not visible on the IPCC express
restarted the IIA admin service to rectify this. after restarting the
callmanager and the IPCC were not available
Anyone with an idea
to select the ICD extensions.
Cliff.
- Original Message -
From: adefila seun
To: ccie_voice@onlinestudylist.com
Sent: Wednesday, April 01, 2009 8:27 PM
Subject: [OSL | CCIE_Voice] IPCC express
Hello,
was configuring IPCC express but the the ICD button
Hello,
i have IP Blue running in demo mode, and cant run two instances of the demo
version
Hello All,
On the fastethernet port connecting to the core switch, i have the duplex
setting as auto
i have this message popping up on the console the HQ router
CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on fastethernet0/1 (not full
duplex), with SW1 ..
i issue no
device as a H323 or MGCP gateway in CM?
Thanks
Larry Hadrava
CCIE #12203 CCNP CCNA
Sr. Support Engineer – IPexpert, Inc.
URL: http://www.IPexpert.com
On Thu, Mar 26, 2009 at 1:09 PM, adefila seun adefilabi...@yahoo.co.uk wrote:
Hello All,
I was having a session yesterday with ver 2.0
Hello All,
I was having a session yesterday with ver 2.0 of the voice proctor lab.
After integrating the br1 gateway to the callmanager, the sh ccm-manager shows
the gateway is registered to the two callmangers
but on the call manager, it was showing unknown
Any one with anh idea of what
Hello
it points to the subscriber and pubisher
Thanks
--- On Tue, 24/3/09, Cristobal Priego cristobalpri...@gmail.com wrote:
From: Cristobal Priego cristobalpri...@gmail.com
Subject: Re: [OSL | CCIE_Voice] CME REGISTRATION
To: adefilabi...@yahoo.co.uk adefilabi...@yahoo.co.uk
Cc:
REGISTRATION
To: adefila seun adefilabi...@yahoo.co.uk, Cristobal Priego
cristobalpri...@gmail.com
Cc: ccie_voice@onlinestudylist.com
Date: Tuesday, 24 March, 2009, 4:07 PM
Then that's where it will register. It has to point to CME if you want it to
register there.
Do to a Proctor labs issue
Hello,
i have issues with the translation in version 2.0 labs
CAlls to gatekepper from the gateway are tanslated has ''called''
like translate called 1
instead of calling because the translation profile applied on the voiceport is
outgoing
i wonder why the tranlate is called and not
Hello,
in pod 12 ver 2.0, after working for a while. the publisher and subscriber
gives you message that page can not be diplayed
Anyone ever experience this
what was done to fix it?
thanks
the ICD icon is not showing inte device association for the IPCC.
tried restarting the IIS Admin services but it always fail
Anyone with a fix
thanks
24 matches
Mail list logo