I would not use voice class codec as cue only supports g711 better to just set
codec to g711 directly. Otherwise if say a remote phone only supports g729
and you have voice class it will not invoke transcode
Bill
On Dec 28, 2012, at 7:37 PM, Amaia Lesta amaia.le...@gmail.com wrote:
Hello
Hello
Have you configured the CUE to communicate with CME?
The following config for SRST allows
- - Callers to be redirected to VM of SRST phones
- - Users access their own VM
- - MWI working
- 1 ) CME CONFIG
voice class codec 1
codec pref 1 g711u
Hi
Can we have the configuration for telephony service?
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of sanity insanity
Sent: Πέμπτη, 27 Δεκεμβρίου 2012 2:52 μμ
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] In cme -srst
hi Chrysostomos,
Here it is ..
telephony-service
srst mode auto-provision all
max-ephones 7
max-dn 7
ip source-address x.x.x.x port 2000 ( ip address is the ip address of
the fa0/1 of the router)
voicemail 4220
max-conferences 8 gain -6
moh music-on-hold.au
transfer-system