Take typical integration of CUCM to Unity Connection sccp integration
CUPC client is used to check voicemail / mwi
CUPC Client --sip signalling- CUPS Server
CUCM Server --sccp signalling- Unity Connection
CUPC Client --sip
not sure as just starting with this, but I believe the CUPC, when logging
in, will download the VM profile setup in CUPS, and then use a direct
connection to CUC over HTTPS to access the VM/MWI - whether it uses SIP
(softphone mode) or CTI (deskphone mode) to talk to CUCM.
Op 22 maart 2012
I think the only direct interaction between CUPC and Unity Connection (for
the voicemail pane in the client) is via IMAP. [And if you're doing this
in production use a recent CUPC, older versions don't support IMAP Idle,
which severely reduces the scalability of Unity Connection].
Any
If you have noticed on CUPS Administration page, you have to configure two
things for voicemail.
1) Voicemail server--This uses Unity Connections Visual Voicemail
Web Service
2) Mailstore --- This uses IMAP to connect to Unity Connection.
Regards,
On Thu, Mar 22, 2012 at 8:49 AM, Juan
CUPC retrives voice messages via IMAP.
Peter
- Original Message -
From: Juan Lopez lopez.hernandez.j...@gmail.com
Date: Thursday, March 22, 2012 9:17 am
Subject: Re: [OSL | CCIE_Voice] CUPC Signalling
To: Ken Wyan kew...@gmail.com
Cc: ccie_voice@onlinestudylist.com
not sure as just
I cannot make calls to listed contacts, from the CUPC in softphone mode
(contacts added through the CUPC user pages)
Dialing from the keypad however is not a problem (so I can make calls
manually from the CUPC in softphone mode).
Few hours later now with no solution so does anyone have an idea?
Hi folks
when asked to configure WAN QoS between two sites, with just the following
specifics-
- allow 2 calls
- RTP compression on the link
do you do the whole SRND-recommended, 2-level qos policy, including 95% bw
calculation ?
or do you just do auto qos (trust, if we can assume packets
So, would https be considered a signaling protocol at all?
what about for IPPM ?
sorry not clear how the protocol layering works when https is involved.
thanks,
/Baktha
___
For more information regarding industry leading CCIE Lab training, please visit
CUPS - thought it was gonna be easy ;) but I do not seem to get it right -
it's like it will not fit together
And the more I try, to less clear it becomes...
mainly about: line appearance for a deskphone is associated with a user:
OK, to provide presence info to CUPS server.
But from the CUPS
So I am running through lab6.2 from the vol2 workbooks and seem to run into a
little snag. I have integrated CME to UC using sip as it has you do. So I can
leave messages and MWI works just fine. But if I try calling in from the br2
user and try to enter a pin the digits arent coming across. To
You can devine Line appearance for the CUP device on the CUCM device menu .
then click on the device and get the extension ..
On Fri, Mar 23, 2012 at 12:05 AM, Juan Lopez lopez.hernandez.j...@gmail.com
wrote:
CUPS - thought it was gonna be easy ;) but I do not seem to get it right -
it's
Do you have MTP required checked on the SIP Trunk in UC?
Kris
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Jason Murray
Sent: Thursday, March 22, 2012 6:11 PM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] DTMF Tones
I have 2821 3825 Routers (IOS 12.4T) want to know which command works
best in all theses routers.
1. service aa flash:bacdprompts/app-b-acd-aa-2.1.tcl
2. service aa flash:/bacdprompts/app-b-acd-aa-2.1.tcl
3. service aa flash://bacdprompts/app-b-acd-aa-2.1.tcl
Also under this service
1.
I don't think there is a setting for that in UC. Between CUCM and UC its a SCCP
integration. But between UCME and UC its a SIP integration. But there is no
trunk you have to create in UC. You just create the Phone System, Port Group
and Ports. Didnt see anything about MTP though.
Jason
-
Hello Ken,
I have to admit defeat. I have no idea what any of those commands do.
--
Marko Milivojevic - CCIE #18427 (SP RS)
Senior CCIE Instructor - IPexpert
On Thu, Mar 22, 2012 at 18:06, Ken Wyan kew...@gmail.com wrote:
I have 2821 3825 Routers (IOS 12.4T) want to know which command works
Ah, I see, Auto Attendant. I should've Googled it first and looked
that you crossposted OSL Voice as well. Please, disregard my previous
message. I'm sure our Voice experts will be able to answer better than
me! :-)
--
Marko Milivojevic - CCIE #18427 (SP RS)
Senior CCIE Instructor - IPexpert
On
Hi All,
I did my best in resolving the sip reinvite issue for AS5400XM cube, but
couldn't find the solution for Version 12.4.24 -T5. The issue is the carrier
sending the sip reinvite intermittently even min-se is set to 1800(30 minutes)
for the established call, and I tried to block that sip
17 matches
Mail list logo
