Try to memorize it then you won't have to worry about looking for it in the
real lab.
Regards,
Hugo
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Bill Hatcher
Sent: Wednesday, October 16, 2013 8:52 AM
To: Martin Sloan
Cc:
Hi Folks,
Cisco documentation site is down by last four days, cannot able to reach the
CUCM and CUCME docs through the Support page, its missing there under the
Unified Communication Platform. Can anybody gives an alternate easy way to
reach this doccs.
Appreciates your earliest actions
Hi All,
I need your analysis based on the following Requirement and my
configuration. Please advise
Requirement :
---
On the HQ switch I need to configure the following...
1) TO ensure cos value of 5 mapped to dscp ef
2) On interface g1/0/4 make sure all incoming
HI,
i need some to help me explain the rule below on the router.
R2(config)#voice translation-rule 1
R2(cfg-translation-rule)#rule 1 /^.*\(3...\)$/ /\1/
R2(config)#voice translation-rule 2
R2(cfg-translation-rule)#rule 1 /^3...$/ /972303/ type any national plan any
isdn
R2(config)#voice
Hi,
I need help with explanation of the dial-peer below.
R2(config-dial-peer)#destination-pattern 9[2-9]..
R2(config-dial-peer)#port 1/0/0:23
R2(config)#dial-peer voice 91 pots
R2(config-dial-peer)#translation-profile outgoing nat
R2(config-dial-peer)#destination-pattern
Hi,
I need help with explanation of the
R2(config-dial-peer)#destination-pattern 9[2-9]..
R2(config-dial-peer)#port 1/0/0:23
R2(config)#dial-peer voice 91 pots
R2(config-dial-peer)#translation-profile outgoing nat
R2(config-dial-peer)#destination-pattern 91[2-9]..[2-9]..
Anthony,
You are wasting your time with these emails. This list is not here to teach
you, it’s here to help you with specific issue you are having while studying
for the lab.
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of
Anthony,
Which dial-peer are you needing help with?
On Wed, Oct 16, 2013 at 4:05 PM, Anthony Nwachukwu
anwachu...@apafrica.comwrote:
Hi,
I need help with explanation of the dial-peer below.
R2(config-dial-peer)#destination-pattern 9[2-9]..
R2(config-dial-peer)#port 1/0/0:23