Re: [OSL | CCIE_Voice] [CORRECTED] CUE QOS on the Switch
thanks bill !! And thats why we call it state of the art, greatest, cutting edge Catalyst :) .. honor my sarcasm...i spent couple of hours playing with the accesslist, policymaps etc ... From: b...@ucguerrilla.com Date: Wed, 17 Apr 2013 19:08:11 -0400 To: kamina.j...@yahoo.com CC: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] [CORRECTED] CUE QOS on the Switch Yeah, on the catalyst switch you won't see the counters increment. That's normal. I would tweak the policy-map: policy-map CUEMAP class CUE-SIGNAL set ip dscp cs3 police 32 8000 exceed-action policed-dscp-transmit!You also need to modify your policed-dscp map: mls qos map policed-dscp 24 to 0 -Bill --William Bell, CCIE #38914blog: http://ucguerrilla.comtwitter: @ucguerrilla On Apr 17, 2013, at 5:59 PM, Jack Kamina wrote:on one of the practice lab the need is to police the signaling packets to and from CUE inbound into the HQ switch to 32 kbps and then remark the DSCP to 0. I built up the config below but dont see any packets matched on the show policy-map interface command. CUE IP is 10.1.6.253 . CUCM IP is 10.10.210.10 (pub) and 10.10.210.11 (sub) .is the access list built correctly? access-list 110 permit tcp host 10.1.6.253 any eq 2748 ! class-map match-all CUE-SIGNAL match access-group 110 ! policy-map CUEMAP class CUE-SIGNAL set dscp af31 bandwidth 20 ! interface Fa0/1/0 description HQ-ROUTER-INTERFACE service-policy input CUEMAP mls qosmls qos map cos 0 8 16 24 32 46 48 56mls qos map policed-dscp 24 26 to 8 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] UCCX in site C
Hi ALL the servers must be in the HQ site Regards Chrysostomos From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of ikizoo hello Sent: 18 April 2013 05:30 To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] UCCX in site C Hi All, i am trying UCCX in site C DN 4000, wondering if this DN located in HQ or SC. if SC, then call from PSTN to 4000 come across WAN with g711 which break codec requirement. and RSVP not triggered since MTP has g729 only so it should be HQ, please let me know any concerns. -ikizoo ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Full Lab, More than one question
Hi Answers below with red From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of CCIEing Sent: 18 April 2013 03:17 To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Full Lab, More than one question Hi All, Today I tried to make a full lab , it was my 1st try to do all tasks in 8 hours session! the following questions appeared : 1-Do i need to enable the auto registration on both CUCM servers, including the starting/End DN information ? No its ok with only one cucm server 2- When you use the auto registration method to register your phone, what exactly define which device pool the new registered phone will belong to The default device pool. Then edit to the correct. Note that sometimes you get an error with the auto registration so you have to disable all the security services at both cucms and ADD the phones manually 3- What can be checked if SiteB Routed was not synchronized wirt HQ-Router, my router stay un-synchronize Which interface in HQ router is the ntp master? If is the loopback then try to add ip ospf network point-to-point into the HQ Loopback interface 4- When it comes to any update of the Ringlists, do I need to restart TFTP service in both servers, and does it mandatory to upload the Files to both TFTP? Yes for both questions And Finally, I really shocked how much time the full lab needs, I did not finish 50 % of the lab in the 8 hours, I really need your advise regarding the time challenge !! The best choice is the device base approach. Search into YouTube to understand the process Best Regards ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Directory service
Hi ALLi face a weird behavior with Directory service in No service configured requirement.a 7965 has internal in service provision and all phone service(except voicemail) are deleted in CUCM. but the 7965 shows recieved calls/placed calls/missed call/intercom history, it should show nothing with no service configured. when i put the both in service provision then it shows the 4 directories which is assigned in xml file in UCCX under those 4 directorie, so it shows total 8 directories.i dont see any clue where is this 4 directories come from. i have 7965 and CIPC in the lab. CIPC not have this be havior. anyone has experience this kind of wired? -ikizoo ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CCIE VOICE LAB FOR SALE - Melbourne Australia
Hi Guys, Just resend this for anyone who will be interested. Thanks Gary On 17/04/2013, at 0:51, gary zhou garyzh...@gmail.com wrote: Hi All Just passed my CCIE Voice and want to sell my lab at the price 3,800 AUD - save 1,500 dollars or more if buying from ebay. Also including software and STUDY MATERIAL to PASS the lab for free. Please check the list of the equipment below. It is enough to simulate the real V3 voice lab topology and all kinds of CCVP/CCIE senarios. All equipment has been carefully tested and guaranteed to be fully working. If you are interested or need show ver or show inv output, please send email to my address: garyzh888 (at) gmail.com I am in Melbourne, Australia. Local pickup with cash or bank transfer is preferred. Additional cost for shipping. Thanks HQ-SWITCH WS-C3750-24PS-S Cisco Catalyst 3750 24 Port PoE WS-C3750-24PS-S Catalyst 3750 24 10/100 PoE + 2 SFP Standard Image HQ CISCO2801 Integrated services router with AC power, 2FE, 4 Interface Card Slots, 2 PVDM slots, 2 AIMs, and Cisco IOS IP Base Software PVDM2-48Cisco PVDM2-48 48 channel PVDM packet fax and voice DSP module PVDM2-16Cisco PVDM2-16 16 channel PVDM packet fax and voice DSP module VWIC-1MFT-T1VWIC-1MFT-T1 1-Port RJ-48 Multiflex Trunk - T1 WIC-2T WIC-2T 2-Port Serial WAN Interface Card MEM2801-256D256mb DRAM Memory for Cisco 2801 Router 256M FLASH 256mb Flash Memory for Cisco 2800 Series SITE-B CISCO2801 Integrated services router with AC power, 2FE, 4 Interface Card Slots, 2 PVDM slots, 2 AIMs, and Cisco IOS IP Base Software PVDM2-48Cisco PVDM2-48 48 channel PVDM packet fax and voice DSP module VWIC-1MFT-T1VWIC-1MFT-T1 1-Port RJ-48 Multiflex Trunk - T1 WIC-2T WIC-2T 2-Port Serial WAN Interface Card HWIC-4ESW Cisco EtherSwitch 4-Port High-Speed WAN Interface Cards MEM2801-256D256mb DRAM Memory for Cisco 2801 Router 256M FLASH 256mb Flash Memory for Cisco 2800 Series SITE-C CISCO2821 Integrated services router with AC power, 2GE, 1 NME-X, 1 EVM, 4 HWICs, 3 PVDM slots, 2 AIMs, and Cisco IOS IP Base Software PVDM2-32Cisco PVDM2-32 32 channel PVDM packet fax and voice DSP module PVDM2-16Cisco PVDM2-16 16 channel PVDM packet fax and voice DSP module PVDM2-16Cisco PVDM2-16 16 channel PVDM packet fax and voice DSP module VWIC-1MFT-E1VWIC-1MFT-E1 Single-port RJ-48 Multiflex Trunk-E1 Voice/WAN Interface Card HWIC-4ESW Cisco EtherSwitch 4-Port High-Speed WAN Interface Cards WIC-2T WIC-2T 2-Port Serial WAN Interface Card NM-CUE NM-CUE Cisco Unity Express Network Module (includes SCUE-12-VM) 256M FLASH 256mb Flash Memory for Cisco 2800 Series PSTN CISCO2811 Integrated services router with AC power, 2FE, 1 NME, 4 HWICs, 2 PVDM slots, 2 AIMs, and Cisco IOS IP Base Software WIC-2T WIC-2T 2-Port Serial WAN Interface Card WIC-2T WIC-2T 2-Port Serial WAN Interface Card NM-HDV2-2T1/E1 NM-HDV2 IP Communications High-Density Digital Voice or Fax Network Modules PVDM2-16Cisco PVDM2-16 16 channel PVDM packet fax and voice DSP module PVDM2-16Cisco PVDM2-16 16 channel PVDM packet fax and voice DSP module PVDM2-64Cisco PVDM2-64 64 channel PVDM packet fax and voice DSP module VWIC-1MFT-E1VWIC-1MFT-E1 Single-port RJ-48 Multiflex Trunk-E1 Voice/WAN Interface Card 256M FLASH 256mb Flash Memory for Cisco 2800 Series IP Phones 2 * Cisco 7912 IP Phone 2 * Cisco 7960 IP Phone 2 * Cisco 7940 IP Phone Accessories 3 * Serial back-to-back cable 3 * T1/E1 Cable 4 * Power Cable 2 * Console Cable 6 * Ethernet Cable Regards, Gary ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] [AAR : SLRG and Plus Routing]
Dear All, For the AAR is it permitted to USE SLRG and PLUS routing in the lab. Thanking you as always, Ravi. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Full Lab, More than one question
Thank man for your input. Appreciate it On Thu, Apr 18, 2013 at 9:04 AM, Chrysostomos Christofi ch.christ...@logicom.net wrote: Hi ** ** Answers below with red ** ** *From:* ccie_voice-boun...@onlinestudylist.com [mailto: ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *CCIEing *Sent:* 18 April 2013 03:17 *To:* ccie_voice@onlinestudylist.com *Subject:* [OSL | CCIE_Voice] Full Lab, More than one question ** ** Hi All, ** ** Today I tried to make a full lab , it was my 1st try to do all tasks in 8 hours session! ** ** the following questions appeared : ** ** 1-Do i need to enable the auto registration on both CUCM servers, including the starting/End DN information ? No its ok with only one cucm server ** ** 2- When you use the auto registration method to register your phone, what exactly define which device pool the new registered phone will belong to The default device pool. Then edit to the correct. Note that sometimes you get an error with the auto registration so you have to disable all the security services at both cucms and ADD the phones manually ** ** 3- What can be checked if SiteB Routed was not synchronized wirt HQ-Router, my router stay un-synchronize Which interface in HQ router is the ntp master? If is the loopback then try to add ip ospf network point-to-point into the HQ Loopback interface** ** ** ** 4- When it comes to any update of the Ringlists, do I need to restart TFTP service in both servers, and does it mandatory to upload the Files to both TFTP? Yes for both questions And Finally, I really shocked how much time the full lab needs, I did not finish 50 % of the lab in the 8 hours, I really need your advise regarding the time challenge !! The best choice is the device base approach. Search into YouTube to understand the process Best Regards ** ** ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] IPexpert SiteB DID's
Hi all, For the seek of solving the MVA task for siteB, a DID number needed. How to know the range of DID's for the T1 PRI used with Site B? Appreciate your input ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] UCCX in site C
Even in real labs it is on HQ side i dont understand the logic. add me if anyone ready to practice lab 8 with me which i got now in lab all stuff is new tk On Thu, Apr 18, 2013 at 11:25 AM, Chrysostomos Christofi ch.christ...@logicom.net wrote: Hi ** ** ALL the servers must be in the HQ site ** ** Regards Chrysostomos ** ** ** ** *From:* ccie_voice-boun...@onlinestudylist.com [mailto: ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *ikizoo hello *Sent:* 18 April 2013 05:30 *To:* ccie_voice@onlinestudylist.com *Subject:* [OSL | CCIE_Voice] UCCX in site C ** ** Hi All, i am trying UCCX in site C DN 4000, wondering if this DN located in HQ or SC. if SC, then call from PSTN to 4000 come across WAN with g711 which break codec requirement. and RSVP not triggered since MTP has g729 only ** ** so it should be HQ, please let me know any concerns. -ikizoo ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CCIE VOICE LAB FOR SALE - Melbourne Australia
U are very luck no lab 8 for u On Thu, Apr 18, 2013 at 12:29 PM, Gary Zhu garyzh...@gmail.com wrote: Hi Guys, Just resend this for anyone who will be interested. Thanks Gary On 17/04/2013, at 0:51, gary zhou garyzh...@gmail.com wrote: Hi All Just passed my CCIE Voice and want to sell my lab at the price 3,800 AUD - save 1,500 dollars or more if buying from ebay. Also including software and STUDY MATERIAL to PASS the lab for free. Please check the list of the equipment below. It is enough to simulate the real V3 voice lab topology and all kinds of CCVP/CCIE senarios. All equipment has been carefully tested and guaranteed to be fully working. If you are interested or need show ver or show inv output, please send email to my address: garyzh888 (at) gmail.com I am in Melbourne, Australia. Local pickup with cash or bank transfer is preferred. Additional cost for shipping. Thanks *HQ-SWITCH* WS-C3750-24PS-S Cisco Catalyst 3750 24 Port PoE WS-C3750-24PS-S Catalyst 3750 24 10/100 PoE + 2 SFP Standard Image *HQ* CISCO2801 Integrated services router with AC power, 2FE, 4 Interface Card Slots, 2 PVDM slots, 2 AIMs, and Cisco IOS IP Base Software PVDM2-48Cisco PVDM2-48 48 channel PVDM packet fax and voice DSP module PVDM2-16Cisco PVDM2-16 16 channel PVDM packet fax and voice DSP module VWIC-1MFT-T1VWIC-1MFT-T1 1-Port RJ-48 Multiflex Trunk - T1 WIC-2T WIC-2T 2-Port Serial WAN Interface Card MEM2801-256D256mb DRAM Memory for Cisco 2801 Router 256M FLASH 256mb Flash Memory for Cisco 2800 Series *SITE-B* CISCO2801 Integrated services router with AC power, 2FE, 4 Interface Card Slots, 2 PVDM slots, 2 AIMs, and Cisco IOS IP Base Software PVDM2-48Cisco PVDM2-48 48 channel PVDM packet fax and voice DSP module VWIC-1MFT-T1VWIC-1MFT-T1 1-Port RJ-48 Multiflex Trunk - T1 WIC-2T WIC-2T 2-Port Serial WAN Interface Card HWIC-4ESW Cisco EtherSwitch 4-Port High-Speed WAN Interface Cards MEM2801-256D256mb DRAM Memory for Cisco 2801 Router 256M FLASH 256mb Flash Memory for Cisco 2800 Series *SITE-C* CISCO2821 Integrated services router with AC power, 2GE, 1 NME-X, 1 EVM, 4 HWICs, 3 PVDM slots, 2 AIMs, and Cisco IOS IP Base Software PVDM2-32Cisco PVDM2-32 32 channel PVDM packet fax and voice DSP module PVDM2-16Cisco PVDM2-16 16 channel PVDM packet fax and voice DSP module PVDM2-16Cisco PVDM2-16 16 channel PVDM packet fax and voice DSP module VWIC-1MFT-E1VWIC-1MFT-E1 Single-port RJ-48 Multiflex Trunk-E1 Voice/WAN Interface Card HWIC-4ESW Cisco EtherSwitch 4-Port High-Speed WAN Interface Cards WIC-2T WIC-2T 2-Port Serial WAN Interface Card NM-CUE NM-CUE Cisco Unity Express Network Module (includes SCUE-12-VM) 256M FLASH 256mb Flash Memory for Cisco 2800 Series *PSTN* CISCO2811 Integrated services router with AC power, 2FE, 1 NME, 4 HWICs, 2 PVDM slots, 2 AIMs, and Cisco IOS IP Base Software WIC-2T WIC-2T 2-Port Serial WAN Interface Card WIC-2T WIC-2T 2-Port Serial WAN Interface Card NM-HDV2-2T1/E1 NM-HDV2 IP Communications High-Density Digital Voice or Fax Network Modules PVDM2-16Cisco PVDM2-16 16 channel PVDM packet fax and voice DSP module PVDM2-16Cisco PVDM2-16 16 channel PVDM packet fax and voice DSP module PVDM2-64Cisco PVDM2-64 64 channel PVDM packet fax and voice DSP module VWIC-1MFT-E1VWIC-1MFT-E1 Single-port RJ-48 Multiflex Trunk-E1 Voice/WAN Interface Card 256M FLASH 256mb Flash Memory for Cisco 2800 Series IP Phones 2 * Cisco 7912 IP Phone 2 * Cisco 7960 IP Phone 2 * Cisco 7940 IP Phone Accessories 3 * Serial back-to-back cable 3 * T1/E1 Cable 4 * Power Cable 2 * Console Cable 6 * Ethernet Cable Regards, Gary ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] [AAR : SLRG and Plus Routing]
u can use anything it shld only work AAR is nothing work on new requirements as per lab 8 it is very hard On Thu, Apr 18, 2013 at 2:21 PM, ie ravindra ieravin...@gmail.com wrote: Dear All, For the AAR is it permitted to USE SLRG and PLUS routing in the lab. Thanking you as always, Ravi. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CCIE VOICE LAB FOR SALE - Melbourne Australia
Hi Kevin, What is this Lab 8 story. Is it means did they released their next version of blue print of is it just new exam lab ?. Can you share the information if you have some. My exam has been rescheduled due to some reason. However I just only remains one month to my studies. :-(. Sadly. Thanks, Ravi. On Thu, Apr 18, 2013 at 7:18 PM, Kevin Ronc roncke...@gmail.com wrote: U are very luck no lab 8 for u On Thu, Apr 18, 2013 at 12:29 PM, Gary Zhu garyzh...@gmail.com wrote: Hi Guys, Just resend this for anyone who will be interested. Thanks Gary On 17/04/2013, at 0:51, gary zhou garyzh...@gmail.com wrote: Hi All Just passed my CCIE Voice and want to sell my lab at the price 3,800 AUD - save 1,500 dollars or more if buying from ebay. Also including software and STUDY MATERIAL to PASS the lab for free. Please check the list of the equipment below. It is enough to simulate the real V3 voice lab topology and all kinds of CCVP/CCIE senarios. All equipment has been carefully tested and guaranteed to be fully working. If you are interested or need show ver or show inv output, please send email to my address: garyzh888 (at) gmail.com I am in Melbourne, Australia. Local pickup with cash or bank transfer is preferred. Additional cost for shipping. Thanks *HQ-SWITCH* WS-C3750-24PS-SCisco Catalyst 3750 24 Port PoE WS-C3750-24PS-S Catalyst 3750 24 10/100 PoE + 2 SFP Standard Image *HQ* CISCO2801 Integrated services router with AC power, 2FE, 4 Interface Card Slots, 2 PVDM slots, 2 AIMs, and Cisco IOS IP Base Software PVDM2-48 Cisco PVDM2-48 48 channel PVDM packet fax and voice DSP module PVDM2-16 Cisco PVDM2-16 16 channel PVDM packet fax and voice DSP module VWIC-1MFT-T1 VWIC-1MFT-T1 1-Port RJ-48 Multiflex Trunk - T1 WIC-2T WIC-2T 2-Port Serial WAN Interface Card MEM2801-256D 256mb DRAM Memory for Cisco 2801 Router 256M FLASH 256mb Flash Memory for Cisco 2800 Series *SITE-B* CISCO2801 Integrated services router with AC power, 2FE, 4 Interface Card Slots, 2 PVDM slots, 2 AIMs, and Cisco IOS IP Base Software PVDM2-48 Cisco PVDM2-48 48 channel PVDM packet fax and voice DSP module VWIC-1MFT-T1 VWIC-1MFT-T1 1-Port RJ-48 Multiflex Trunk - T1 WIC-2T WIC-2T 2-Port Serial WAN Interface Card HWIC-4ESW Cisco EtherSwitch 4-Port High-Speed WAN Interface Cards MEM2801-256D 256mb DRAM Memory for Cisco 2801 Router 256M FLASH 256mb Flash Memory for Cisco 2800 Series *SITE-C* CISCO2821 Integrated services router with AC power, 2GE, 1 NME-X, 1 EVM, 4 HWICs, 3 PVDM slots, 2 AIMs, and Cisco IOS IP Base Software PVDM2-32 Cisco PVDM2-32 32 channel PVDM packet fax and voice DSP module PVDM2-16 Cisco PVDM2-16 16 channel PVDM packet fax and voice DSP module PVDM2-16 Cisco PVDM2-16 16 channel PVDM packet fax and voice DSP module VWIC-1MFT-E1 VWIC-1MFT-E1 Single-port RJ-48 Multiflex Trunk-E1 Voice/WAN Interface Card HWIC-4ESW Cisco EtherSwitch 4-Port High-Speed WAN Interface Cards WIC-2T WIC-2T 2-Port Serial WAN Interface Card NM-CUE NM-CUE Cisco Unity Express Network Module (includes SCUE-12-VM) 256M FLASH 256mb Flash Memory for Cisco 2800 Series *PSTN* CISCO2811 Integrated services router with AC power, 2FE, 1 NME, 4 HWICs, 2 PVDM slots, 2 AIMs, and Cisco IOS IP Base Software WIC-2T WIC-2T 2-Port Serial WAN Interface Card WIC-2T WIC-2T 2-Port Serial WAN Interface Card NM-HDV2-2T1/E1 NM-HDV2 IP Communications High-Density Digital Voice or Fax Network Modules PVDM2-16 Cisco PVDM2-16 16 channel PVDM packet fax and voice DSP module PVDM2-16 Cisco PVDM2-16 16 channel PVDM packet fax and voice DSP module PVDM2-64 Cisco PVDM2-64 64 channel PVDM packet fax and voice DSP module VWIC-1MFT-E1 VWIC-1MFT-E1 Single-port RJ-48 Multiflex Trunk-E1 Voice/WAN Interface Card 256M FLASH 256mb Flash Memory for Cisco 2800 Series IP Phones 2 * Cisco 7912 IP Phone 2 * Cisco 7960 IP Phone 2 * Cisco 7940 IP Phone Accessories 3 * Serial back-to-back cable 3 * T1/E1 Cable 4 * Power Cable 2 * Console Cable 6 * Ethernet Cable Regards, Gary ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more
Re: [OSL | CCIE_Voice] [AAR : SLRG and Plus Routing]
AAR should use SLRG and Plus routing.-ikizoo Date: Thu, 18 Apr 2013 14:21:34 +0530 From: ieravin...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] [AAR : SLRG and Plus Routing] Dear All, For the AAR is it permitted to USE SLRG and PLUS routing in the lab. Thanking you as always, Ravi. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Directory service
i just tried 7975 and it work fine, only 7965 shows the issue. -ikizoo From: ikiz...@hotmail.com To: pe...@grayrigg.com Subject: RE: [OSL | CCIE_Voice] Directory service Date: Thu, 18 Apr 2013 10:34:40 -0700 yes. i did reset couple of times, the issue still exist -ikizoo Date: Thu, 18 Apr 2013 08:29:34 +0100 From: pe...@grayrigg.com To: ikiz...@hotmail.com Subject: Re: [OSL | CCIE_Voice] Directory service Did you reset the phone after making CUCM changes? I've seen this behaviour before if I make all the changes on CUCM and then don't reset the phones afterwards. regards Peter On 4/18/2013 7:50 AM, ikizoo hello wrote: Hi ALL i face a weird behavior with Directory service in No service configured requirement. a 7965 has internal in service provision and all phone service(except voicemail) are deleted in CUCM. but the 7965 shows recieved calls/placed calls/missed call/intercom history, it should show nothing with no service configured. when i put the both in service provision then it shows the 4 directories which is assigned in xml file in UCCX under those 4 directorie, so it shows total 8 directories. i dont see any clue where is this 4 directories come from. i have 7965 and CIPC in the lab. CIPC not have this be havior. anyone has experience this kind of wired? -ikizoo ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] file tail activelog
hi all, how to remember this directory in exam ? admin:file tail activelog *cm/trace/ccm/sdi * what CLI command to show what directory for activelog trace tks D ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] file tail activelog
Donny, Like many things, you have to memorize. If you can't do that then do the following: admin:file list activelog * dir car_db dir ccm_db dir cm dir core dir mgetty dir mohprep dir patches dir platform dir sa dir syslog dir tomcat dir count = 11, file count = 0 admin:file list activelog cm/* dir bin dir cdr dir cdr_repository dir log dir report dir tftpdata dir trace dir count = 7, file count = 0 admin:file list activelog cm/trace/* dir ac dir amc dir bps dir capf dir carsch dir ccm dir ccmmib dir ccmservice dir cdp dir cdpmib dir cdragent dir cdrrep dir cef dir cfrt dir cmi dir cms dir ctftp dir cti dir ctlprovider dir dbl dir dhcpmon dir dirsync dir licensing dir lpm dir ris dir rtmtreporter dir syslogmib dir taps dir tct dir count = 29, file count = 0 admin:file list activelog cm/trace/ccm/* dir Proglogs dir sdi dir sdl dir count = 3, file count = 0 admin:file tail activelog cm/trace/ccm/sdi/ recent Don't forget that recent option. If you just want to look at one file then use file list to look at the contents of the SDI (or SDL) folder. Then pick your file. I'd recommend using the detail option for a more informative list. -Bill -- William Bell, CCIE #38914 blog: http://ucguerrilla.com twitter: @ucguerrilla On Apr 18, 2013, at 2:29 PM, donny f wrote: hi all, how to remember this directory in exam ? admin:file tail activelog cm/trace/ccm/sdi what CLI command to show what directory for activelog trace tks D ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Directory service
solved problem, 7965 had old firmware, after upgrade work fine.-ikizoo From: ikiz...@hotmail.com To: pe...@grayrigg.com; ccie_voice@onlinestudylist.com Date: Thu, 18 Apr 2013 11:08:37 -0700 Subject: Re: [OSL | CCIE_Voice] Directory service i just tried 7975 and it work fine, only 7965 shows the issue. -ikizoo From: ikiz...@hotmail.com To: pe...@grayrigg.com Subject: RE: [OSL | CCIE_Voice] Directory service Date: Thu, 18 Apr 2013 10:34:40 -0700 yes. i did reset couple of times, the issue still exist -ikizoo Date: Thu, 18 Apr 2013 08:29:34 +0100 From: pe...@grayrigg.com To: ikiz...@hotmail.com Subject: Re: [OSL | CCIE_Voice] Directory service Did you reset the phone after making CUCM changes? I've seen this behaviour before if I make all the changes on CUCM and then don't reset the phones afterwards. regards Peter On 4/18/2013 7:50 AM, ikizoo hello wrote: Hi ALL i face a weird behavior with Directory service in No service configured requirement. a 7965 has internal in service provision and all phone service(except voicemail) are deleted in CUCM. but the 7965 shows recieved calls/placed calls/missed call/intercom history, it should show nothing with no service configured. when i put the both in service provision then it shows the 4 directories which is assigned in xml file in UCCX under those 4 directorie, so it shows total 8 directories. i dont see any clue where is this 4 directories come from. i have 7965 and CIPC in the lab. CIPC not have this be havior. anyone has experience this kind of wired? -ikizoo ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] HQ incoming calls Filed until I reload the router
Hi all, Very strange thing happen 2 times during my practice to lab, the calls to hq failed until i reload the router before reload, ISDN status was ok mgcp gateways was registered and everything seems to be fine, the call arrive the gateway but the phone does not ring, then call dropped .. Only when I reload the router of HQ things come fine!!! DO I am hitting a bug or what ? What do you think Guys ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Active call recording with NICE
Hi Folks, We are planning to purchase this solution to our CUCM with 100 phones and 1 PRI trunk, but the pricing quote process is slow. http://www.nice.com/interaction-recording/voip-recording Anybody knows the order of magnitude of its price, for selective recording using this platform ? Like, we're going to record 20 extensions... Thanks, Isamar ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] HQ incoming calls Filed until I reload the router
Was this an MGCP gateway? Sent from my iPhone On Apr 18, 2013, at 6:24 PM, CCIEing aboaz...@gmail.com wrote: Hi all, Very strange thing happen 2 times during my practice to lab, the calls to hq failed until i reload the router before reload, ISDN status was ok mgcp gateways was registered and everything seems to be fine, the call arrive the gateway but the phone does not ring, then call dropped .. Only when I reload the router of HQ things come fine!!! DO I am hitting a bug or what ? What do you think Guys ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] file tail activelog
hi Bill, tks , this is what i am looking for. - what is the - l command in SSH for ? ssh -l admin 10.10.210.10 , why we need - l ? - what is different between file tail activelog /cm/trace/ccm/sdi/ccm0004.txt and file tail activelog /cm/trace/ccm/sdi/ recent ? I guess recent is what we need in exam. D On Thu, Apr 18, 2013 at 1:13 PM, William Bell b...@ucguerrilla.com wrote: Donny, Like many things, you have to memorize. If you can't do that then do the following: *admin:file list activelog ** dir car_db dir ccm_db dir *cm* dir core dir mgetty dir mohprep dir patches dir platform dir sa dir syslog dir tomcat dir count = 11, file count = 0 *admin:file list activelog cm/** dir bin dir cdr dir cdr_repository dir log dir report dir tftpdata *dir trace* dir count = 7, file count = 0 *admin:file list activelog cm/trace/** dir ac dir amc dir bps dir capf dir carsch *dir ccm* dir ccmmib dir ccmservice dir cdp dir cdpmib dir cdragent dir cdrrep dir cef dir cfrt dir cmi dir cms dir ctftp dir cti dir ctlprovider dir dbl dir dhcpmon dir dirsync dir licensing dir lpm dir ris dir rtmtreporter dir syslogmib dir taps dir tct dir count = 29, file count = 0 *admin:file list activelog cm/trace/ccm/** dir Proglogs *dir sdi* dir sdl dir count = 3, file count = 0 *admin:file tail activelog cm/trace/ccm/sdi/ recent* * * Don't forget that recent option. If you just want to look at one file then use file list to look at the contents of the SDI (or SDL) folder. Then pick your file. I'd recommend using the detail option for a more informative list. -Bill -- William Bell, CCIE #38914 blog: http://ucguerrilla.com twitter: @ucguerrilla On Apr 18, 2013, at 2:29 PM, donny f wrote: hi all, how to remember this directory in exam ? admin:file tail activelog *cm/trace/ccm/sdi * what CLI command to show what directory for activelog trace tks D ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] HQ incoming calls Filed until I reload the router
Yes On Fri, Apr 19, 2013 at 2:57 AM, Bill Lake whl...@gmail.com wrote: Was this an MGCP gateway? Sent from my iPhone On Apr 18, 2013, at 6:24 PM, CCIEing aboaz...@gmail.com wrote: Hi all, Very strange thing happen 2 times during my practice to lab, the calls to hq failed until i reload the router before reload, ISDN status was ok mgcp gateways was registered and everything seems to be fine, the call arrive the gateway but the phone does not ring, then call dropped .. Only when I reload the router of HQ things come fine!!! DO I am hitting a bug or what ? What do you think Guys ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] HQ incoming calls Filed until I reload the router
- did u put 'isdn bchan ascend' in serial interface any chance?- did u check 'deb isdn q931' have you seen something like ... channel unavailable -ikizoo Date: Fri, 19 Apr 2013 04:31:36 +0300 From: aboaz...@gmail.com To: whl...@gmail.com CC: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] HQ incoming calls Filed until I reload the router Yes On Fri, Apr 19, 2013 at 2:57 AM, Bill Lake whl...@gmail.com wrote: Was this an MGCP gateway? Sent from my iPhone On Apr 18, 2013, at 6:24 PM, CCIEing aboaz...@gmail.com wrote: Hi all, Very strange thing happen 2 times during my practice to lab, the calls to hq failed until i reload the router before reload, ISDN status was ok mgcp gateways was registered and everything seems to be fine, the call arrive the gateway but the phone does not ring, then call dropped .. Only when I reload the router of HQ things come fine!!! DO I am hitting a bug or what ? What do you think Guys ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] MVA dial-peer
Hi Allin the site b h323 GW has PRI already, so i can use it for remote system access... dial-peer voice xx potsservice mvaport incoming called (translation-rule apply in voice-port) dial-peer voice yy voippointing to CUCM call from PSTN(remote destination) MVA PSTN call is working fine.'allow h323 to h323' no need, since this call is not voip- voip call. 1. in the pstn phone dose not have calling name, but it is not requirement.2. falling into VM issue, in call from PSTN to 3001 is expected behavior. please let me know if you have any concern to discuss. -ikizoo ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com