Re: [OSL | CCIE_Voice] Lab IP Routing

[Martin Sloan]

Josh,

For the OSPF question, my current plan is to issue the below as part of a
base config on all routers to make sure I'm advertising the local networks
and hopefully negate any built-in troubleshooting for the routing piece:

router ospf 1
network 0.0.0.0 area 0

I'm interested to hear others opinions though.

Marty



On Tue, Apr 30, 2013 at 10:12 PM, Josh Petro  wrote:

> Hi everyone,
> I'm sorry for asking this question, but it hit me a little while ago that
> for the most part, routing via OSPF is setup on most (if not all) of the
> practice labs. Is that the case in the real lab? I'm trying to make sure I
> don't need to brush up on my OSPF commands prior to my attempt. I know the
> previous versions of the lab had more IP routing in them, but I wasn't sure
> what this version was like.
>
> Also, I'm assuming our connection to the lab is via console cable and
> there is no way to telnet to the gateways, correct? Reason I ask is because
> we're always talking about speed and whatnot and 9600 baud isn't exactly
> what you'd want so I've been practicing my command line switches for
> finding the correct running-config commands.
>
> Any info (without breaking NDA) is appreciate.
>
> Josh
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] IPCC Problem

[Robert Thomas]

You get this greeting whenever your script throws out an exception.

I would reactive debug it and look at what step is failing. Who knows,
perhaps you missed a setting on the CSQ so the script is finding itself
unavailable to route the call to the agent and throwing an exception to
you.




On Mon, Apr 29, 2013 at 11:39 PM, CISCO CCIE VOICE wrote:

> Hi,
> whn i call frm PSTN to 2022400 it play the " Thank you for calling" then
> "Thank You for waiting, we wll connect you with our Agent HQ1 " then i am
> getting MOH audio after that call will goes to Site B Phone 1 and play the
> prompt as ""Thank You for waiting, we wll connect you with our Agent
> SiteB1" and then i am able hear MOH audio .After that i getting "i am sorry
> we r currently facing system problm and r unable t process ur call
>
>
>
>
>
> On Tue, Apr 30, 2013 at 9:26 AM, Hesham Abdelkereem <
> heshamcentr...@gmail.com> wrote:
>
>> Thats definitely a wrong script was made however ,
>> If you want to update the script make the following steps
>>
>> 1-Edit the script on the UCCX Editor Application
>> 2-Save As anything (the old name same as listed on UCCX Admin)
>> 3-Validate the script on UCCX Editor and make sure its successfully
>> validated
>> 4-Then go to UCCX Admin > Script Management -> Upload the Script
>> --> Overwrite the Script --> Then Refresh The Script
>> 5-Refresh the Application Script
>>
>> Then you should be good to go
>>
>> Thanks,
>> Hesham
>>
>>
>> On 29 April 2013 23:03, CISCO CCIE VOICE  wrote:
>>
>>> Hi Experts,
>>>
>>> I am getting an error "i am sorry we r currently facing system problm
>>> and r unable t process ur call" during CSQ
>>>
>>> Thanks
>>>
>>>
>>> ___
>>> For more information regarding industry leading CCIE Lab training,
>>> please visit www.ipexpert.com
>>>
>>> Are you a CCNP or CCIE and looking for a job? Check out
>>> www.PlatinumPlacement.com
>>>
>>
>>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>



-- 
Robert Thomas Zamora
tho...@gmail.com +50689389544
http://cr.linkedin.com/pub/robert-thomas-zamora/29/913/8a8
CCNP, CCNP Voice
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Lab IP Routing

[Robert Thomas]

Josh,

As a piece of advise, I would have some basic level of troubleshooting
regarding OSPF and routing. I have heard instances of interfaces or
loopbacks that might not be reachable from the default config.

Although you don't want to spend a whole lot of time on this, I would
expect a CCIE to have some basic level of config and troubleshooting should
something not have connectivity. Again the type of issues that could be
induced in the lab are very limited.




On Tue, Apr 30, 2013 at 7:12 PM, Josh Petro  wrote:

> Hi everyone,
> I'm sorry for asking this question, but it hit me a little while ago that
> for the most part, routing via OSPF is setup on most (if not all) of the
> practice labs. Is that the case in the real lab? I'm trying to make sure I
> don't need to brush up on my OSPF commands prior to my attempt. I know the
> previous versions of the lab had more IP routing in them, but I wasn't sure
> what this version was like.
>
> Also, I'm assuming our connection to the lab is via console cable and
> there is no way to telnet to the gateways, correct? Reason I ask is because
> we're always talking about speed and whatnot and 9600 baud isn't exactly
> what you'd want so I've been practicing my command line switches for
> finding the correct running-config commands.
>
> Any info (without breaking NDA) is appreciate.
>
> Josh
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>



-- 
Robert Thomas Zamora
tho...@gmail.com +50689389544
http://cr.linkedin.com/pub/robert-thomas-zamora/29/913/8a8
CCNP, CCNP Voice
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Buying home lab or Waiting for Cisco Live in June

[Robert Thomas]

Thanks for the Advise.  CCIE salary expectations vary on time and they also
vary on Geography.

Currently a CCNP in CR (Costa Rica) makes somewhere 25K a year. (Yeah we
are cheap, perhaps not as cheap as India) and a CCIE makes somewhere aroun
50K a year. You can leave pretty decently on this country anywhere above
the 20K.

I'm planning to buy the whole Routers, Switch, PVDM2 and so on, just like
the lab. Perhaps I might skip over the 4ESW modules.

For the server I'm planning to use my good old I7, 24GB RAM Desktop, that
has suite me well.

Eventhoug Cisco refresh to CUCM and go ballistic, with a 2 Cluster Setup
and multiple products, I don't think they will go beyond the 32GB ball
park. Specially looking at the UCS TRC, and the B6K, so people have
equipment to play with.

One of the factor cost is shipping large stuff, like servers became a
logistic hassle. Routers and SW, and small parts are easy to
"transit" through customs.









On Tue, Apr 30, 2013 at 7:19 PM, Hesham Abdelkereem <
heshamcentr...@gmail.com> wrote:

> Also , It's good to mention that if you've decided to wait for a new
> version.
> You have to wait for a very long time at least a year after the new
> version released.
> As  you must wait for a new workbook versions as well as you need to
> consult people who took and passed the new version so that will never be in
> a couple of months and you talkin' at least a year for things to get
> cleared to you if you will wait for a new version so you talkin' about 2
> years from now to make your first attempt.
> I see go ahead look for the equipment right this minute , Practice and
> Study and good luck
>
>
> On 30 April 2013 19:12, Hesham Abdelkereem wrote:
>
>> Robert,
>>
>> Robert my good advice for you.
>> But the lab with the highest end Server something like DELL POWER EDGE V3
>> which has 64 gb rams and 4 TB hard drives the server will be valid for any
>> other application you want.
>> CUCM Cluster V9 , Microsoft Server 2012 , Exchange 2013 and LYNC 2013.
>> Make sure your server is powerful in the first place and that will not
>> cost you more than $950 from ebay.com.
>> For the routers and switches If you bought it as components and you would
>> like to sell it as component it will still sell slightly more or less than
>> the price you get.
>> I see don't hesitate just buy your homelab nowadays from ebay.com and
>> Never give up.
>> If you have only this year for this current version then keep calm and
>> carry on.
>> Study and If you didn't pass schedule a test every 30 days exactly till
>> the abolishment date.
>> You will find a spot somewhere for sure whether in SJC , RTP , Europe ,
>> Dubai and it worth to travel if needed.
>> We have to struggle for something which will give us the lifeline and
>> CCIE is a big lifeline for many people not necessarily R/S as it lost it's
>> value in the market already but CCIE Voice is unique and demanded and if
>> you invested 20K for lab equipment , lab attempts , workbooks and etc.
>> believe me you will get compensated right away as soon as you achieve it.
>> If you value in the market now 80K - 120K with your current experience +
>> CCVP then when you become CCIE V you will get a job for 150K or 150K+ then
>> its worth it its lifetime investment do it mate.
>>
>> Thanks,
>> Hesham
>>
>> On 30 April 2013 18:35, Bill Lake  wrote:
>>
>>> I know this can be true.  When I took my lab, another version was
>>> updating and I talked to one of the guys taking it.  he said that all the
>>> seats were full for the next 6 weeks.  So if he did not pass, he most
>>> likely would not get another chance.  Not sure what people do, book extra
>>> labs just in case?  Then what do you do with the extra one if you pass?  Oh
>>> well, don't have to worry about that.
>>>
>>>
>>> On Tue, Apr 30, 2013 at 8:26 PM, Robert Thomas  wrote:
>>>

 Eventhough they refresh the HW I don't expect any major changes. I mean
 I think people will continue to use 28XX series and PVDM2 for a while...

 Most likely they will upgrade to CUCM 8.6, 9 is still too early on the
 field.  10 wont be comming out until next year to the customers.

 The only thing that concerns me, is if they anounce a change, everyone
 is going to book their last attempts and buyout any remaining spots for the
 year.

 Cisco might go for a refresher just to "increase demand" for spots






 On Sun, Apr 28, 2013 at 12:02 PM, Bill  wrote:

> If they announce a new version in June you will have about 6 months
> from then to pass your lab.
>
> My recommendation from there is if you have plenty of study/lab time
> then go for it.  If you don't and have to squeeze it in then you might be
> better off waiting to see.
>
>  My thought is that 600 to 1200 hours of lab time is needed, more if
> you spread it out and less if you can focus solely on Cisco voice stuff.
>
> Sent from my iPad

Re: [OSL | CCIE_Voice] !!Questions on H323 trunk troubleshooting!!

[Mark Thrash (marthras)]

Just configure it as an h323 gateway, it is still a "trunk" and it is the 
shortest distance between two points.


From: Robert Thomas mailto:tho...@gmail.com>>
Date: Tuesday, April 30, 2013 9:00 PM
To: ikizoo hello mailto:ikiz...@hotmail.com>>
Cc: "ccie_voice@onlinestudylist.com" 
mailto:ccie_voice@onlinestudylist.com>>, sanity 
insanity 
mailto:networksanitytoinsan...@gmail.com>>
Subject: Re: [OSL | CCIE_Voice] !!Questions on H323 trunk troubleshooting!!


I don't think you go for the ICT of the H323 Gateway.

The recommendation is a H225 Trunk. When you create a new trunk you have 
multiple options: "ICT GK controlled, ICT non GK controlled and H255 Trunk.

I would go for the last.




On Thu, Apr 25, 2013 at 12:55 PM, ikizoo hello 
mailto:ikiz...@hotmail.com>> wrote:
i have different perspective,,
according to cisco recommendation ICT is only for between 2 CUCM clusters, and 
lab requirement  saying POC of H323 trunk for PSTN access. so i would choose GW 
instead.

-ikizoo


From: mmac...@bcbsal.org
To: 
networksanitytoinsan...@gmail.com; 
ccie_voice@onlinestudylist.com
Date: Thu, 25 Apr 2013 08:23:21 -0500
Subject: Re: [OSL | CCIE_Voice] !!Questions on H323 trunk troubleshooting!!



1)The question says trunk so it must be a trunk (inter cluster trunk)

2) that’s more difficult.  Usually it’s a codec mismatch.  And is found in the 
trace ( I forget exact wording you are looking for).  Hopefully someone else 
can provide better detail.



M



From:ccie_voice-boun...@onlinestudylist.com
 
[mailto:ccie_voice-boun...@onlinestudylist.com]
 On Behalf Of sanity insanity
Sent: Thursday, April 25, 2013 12:00 AM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] !!Questions on H323 trunk troubleshooting!!





hi All,

I have a few questions in relation to H323 troubleshooting

We are required to provision a proof of concept (POC) H323 trunk between CUCM 
and voip service
provider . The cucm should send H323 traffic to service provider on ip address 
XX.XX.XX.XX (public Ip address) . This call should be available for HQ Phones 
only.
Inbound H.323 calls from VoIP service provider is not needed for the PoC test.


Questions :-

1) Should we use a H323 gateway or H323 trunk ( no gatekeeper controlled) to 
achieve the above requirement?

2) If we need provide the appropriate debug or traces to verify whether or not
No way audio instances prevalent for HQ Phones . Then what do we look for in 
the logs ?


Thanks ,
MJ





***CONFIDENTIALITY NOTICE***
This e-mail is intended for the sole use of the individual(s) to whom it is 
addressed, and may contain information that is privileged, confidential and 
exempt from disclosure under applicable law. You are hereby notified that any 
dissemination, duplication, or distribution of this transmission by someone 
other than the intended addressee or its designated agent is strictly 
prohibited. If you receive this e-mail in error, please notify me immediately 
by replying to this e-mail.
___ For more information regarding 
industry leading CCIE Lab training, please visit 
www.ipexpert.com Are you a CCNP or CCIE and looking 
for a job? Check out www.PlatinumPlacement.com

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com



--
Robert Thomas Zamora
tho...@gmail.com +50689389544
http://cr.linkedin.com/pub/robert-thomas-zamora/29/913/8a8
CCNP, CCNP Voice
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Buying home lab or Waiting for Cisco Live in June

[Hesham Abdelkereem]

Also , It's good to mention that if you've decided to wait for a new
version.
You have to wait for a very long time at least a year after the new version
released.
As  you must wait for a new workbook versions as well as you need to
consult people who took and passed the new version so that will never be in
a couple of months and you talkin' at least a year for things to get
cleared to you if you will wait for a new version so you talkin' about 2
years from now to make your first attempt.
I see go ahead look for the equipment right this minute , Practice and
Study and good luck


On 30 April 2013 19:12, Hesham Abdelkereem  wrote:

> Robert,
>
> Robert my good advice for you.
> But the lab with the highest end Server something like DELL POWER EDGE V3
> which has 64 gb rams and 4 TB hard drives the server will be valid for any
> other application you want.
> CUCM Cluster V9 , Microsoft Server 2012 , Exchange 2013 and LYNC 2013.
> Make sure your server is powerful in the first place and that will not
> cost you more than $950 from ebay.com.
> For the routers and switches If you bought it as components and you would
> like to sell it as component it will still sell slightly more or less than
> the price you get.
> I see don't hesitate just buy your homelab nowadays from ebay.com and
> Never give up.
> If you have only this year for this current version then keep calm and
> carry on.
> Study and If you didn't pass schedule a test every 30 days exactly till
> the abolishment date.
> You will find a spot somewhere for sure whether in SJC , RTP , Europe ,
> Dubai and it worth to travel if needed.
> We have to struggle for something which will give us the lifeline and CCIE
> is a big lifeline for many people not necessarily R/S as it lost it's value
> in the market already but CCIE Voice is unique and demanded and if you
> invested 20K for lab equipment , lab attempts , workbooks and etc. believe
> me you will get compensated right away as soon as you achieve it.
> If you value in the market now 80K - 120K with your current experience +
> CCVP then when you become CCIE V you will get a job for 150K or 150K+ then
> its worth it its lifetime investment do it mate.
>
> Thanks,
> Hesham
>
> On 30 April 2013 18:35, Bill Lake  wrote:
>
>> I know this can be true.  When I took my lab, another version was
>> updating and I talked to one of the guys taking it.  he said that all the
>> seats were full for the next 6 weeks.  So if he did not pass, he most
>> likely would not get another chance.  Not sure what people do, book extra
>> labs just in case?  Then what do you do with the extra one if you pass?  Oh
>> well, don't have to worry about that.
>>
>>
>> On Tue, Apr 30, 2013 at 8:26 PM, Robert Thomas  wrote:
>>
>>>
>>> Eventhough they refresh the HW I don't expect any major changes. I mean
>>> I think people will continue to use 28XX series and PVDM2 for a while...
>>>
>>> Most likely they will upgrade to CUCM 8.6, 9 is still too early on the
>>> field.  10 wont be comming out until next year to the customers.
>>>
>>> The only thing that concerns me, is if they anounce a change, everyone
>>> is going to book their last attempts and buyout any remaining spots for the
>>> year.
>>>
>>> Cisco might go for a refresher just to "increase demand" for spots
>>>
>>>
>>>
>>>
>>>
>>>
>>> On Sun, Apr 28, 2013 at 12:02 PM, Bill  wrote:
>>>
 If they announce a new version in June you will have about 6 months
 from then to pass your lab.

 My recommendation from there is if you have plenty of study/lab time
 then go for it.  If you don't and have to squeeze it in then you might be
 better off waiting to see.

  My thought is that 600 to 1200 hours of lab time is needed, more if
 you spread it out and less if you can focus solely on Cisco voice stuff.

 Sent from my iPad

 On Apr 28, 2013, at 12:38 PM, Alex Mendoza 
 wrote:

 Did you know the official date for new version?

 I assume that I'll be ready for Sep/oct 2013

 Best Regards

 AA Mendoza
 Sent from my iPhone 

 On 28/04/2013, at 10:33, Robert Thomas  wrote:

 Hi,

 I'm thinking on buying a home lab to start my studies.
 It would run around 3K investment according to my amazon shopping list.

 However I'm thinking to wait for June and Cisco Live
 for announcement about the new version.

 I don't expect major changes on the setup, perhaps some new phone
 models like 99XX, or 89XX on the phones. And upgrade to the routers 29XX.

 However I don't expect major new features from the 29XX roll out on the
 exam.

 I would appreciate your opinions on this.

 --
 Robert Thomas Zamora
 tho...@gmail.com +50689389544
 http://cr.linkedin.com/pub/robert-thomas-zamora/29/913/8a8
 CCNP, CCNP Voice

 ___
 For more information regarding industry leading CCIE

Re: [OSL | CCIE_Voice] Buying home lab or Waiting for Cisco Live in June

[Abel ...]

The system only allow one booking per time.
On Apr 30, 2013 10:02 PM, "Bill Lake"  wrote:

> I know this can be true.  When I took my lab, another version was updating
> and I talked to one of the guys taking it.  he said that all the seats were
> full for the next 6 weeks.  So if he did not pass, he most likely would not
> get another chance.  Not sure what people do, book extra labs just in
> case?  Then what do you do with the extra one if you pass?  Oh well, don't
> have to worry about that.
>
>
> On Tue, Apr 30, 2013 at 8:26 PM, Robert Thomas  wrote:
>
>>
>> Eventhough they refresh the HW I don't expect any major changes. I mean I
>> think people will continue to use 28XX series and PVDM2 for a while...
>>
>> Most likely they will upgrade to CUCM 8.6, 9 is still too early on the
>> field.  10 wont be comming out until next year to the customers.
>>
>> The only thing that concerns me, is if they anounce a change, everyone is
>> going to book their last attempts and buyout any remaining spots for the
>> year.
>>
>> Cisco might go for a refresher just to "increase demand" for spots
>>
>>
>>
>>
>>
>>
>> On Sun, Apr 28, 2013 at 12:02 PM, Bill  wrote:
>>
>>> If they announce a new version in June you will have about 6 months from
>>> then to pass your lab.
>>>
>>> My recommendation from there is if you have plenty of study/lab time
>>> then go for it.  If you don't and have to squeeze it in then you might be
>>> better off waiting to see.
>>>
>>>  My thought is that 600 to 1200 hours of lab time is needed, more if you
>>> spread it out and less if you can focus solely on Cisco voice stuff.
>>>
>>> Sent from my iPad
>>>
>>> On Apr 28, 2013, at 12:38 PM, Alex Mendoza 
>>> wrote:
>>>
>>> Did you know the official date for new version?
>>>
>>> I assume that I'll be ready for Sep/oct 2013
>>>
>>> Best Regards
>>>
>>> AA Mendoza
>>> Sent from my iPhone 
>>>
>>> On 28/04/2013, at 10:33, Robert Thomas  wrote:
>>>
>>> Hi,
>>>
>>> I'm thinking on buying a home lab to start my studies.
>>> It would run around 3K investment according to my amazon shopping list.
>>>
>>> However I'm thinking to wait for June and Cisco Live
>>> for announcement about the new version.
>>>
>>> I don't expect major changes on the setup, perhaps some new phone models
>>> like 99XX, or 89XX on the phones. And upgrade to the routers 29XX.
>>>
>>> However I don't expect major new features from the 29XX roll out on the
>>> exam.
>>>
>>> I would appreciate your opinions on this.
>>>
>>> --
>>> Robert Thomas Zamora
>>> tho...@gmail.com +50689389544
>>> http://cr.linkedin.com/pub/robert-thomas-zamora/29/913/8a8
>>> CCNP, CCNP Voice
>>>
>>> ___
>>> For more information regarding industry leading CCIE Lab training,
>>> please visit www.ipexpert.com
>>>
>>> Are you a CCNP or CCIE and looking for a job? Check out
>>> www.PlatinumPlacement.com
>>>
>>> ___
>>> For more information regarding industry leading CCIE Lab training,
>>> please visit www.ipexpert.com
>>>
>>> Are you a CCNP or CCIE and looking for a job? Check out
>>> www.PlatinumPlacement.com
>>>
>>>
>>
>>
>> --
>> Robert Thomas Zamora
>> tho...@gmail.com +50689389544
>> http://cr.linkedin.com/pub/robert-thomas-zamora/29/913/8a8
>> CCNP, CCNP Voice
>>
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] Lab IP Routing

[Josh Petro]

Hi everyone,
I'm sorry for asking this question, but it hit me a little while ago that
for the most part, routing via OSPF is setup on most (if not all) of the
practice labs. Is that the case in the real lab? I'm trying to make sure I
don't need to brush up on my OSPF commands prior to my attempt. I know the
previous versions of the lab had more IP routing in them, but I wasn't sure
what this version was like.

Also, I'm assuming our connection to the lab is via console cable and there
is no way to telnet to the gateways, correct? Reason I ask is because we're
always talking about speed and whatnot and 9600 baud isn't exactly what
you'd want so I've been practicing my command line switches for finding the
correct running-config commands.

Any info (without breaking NDA) is appreciate.

Josh
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Buying home lab or Waiting for Cisco Live in June

[Hesham Abdelkereem]

Robert,

Robert my good advice for you.
But the lab with the highest end Server something like DELL POWER EDGE V3
which has 64 gb rams and 4 TB hard drives the server will be valid for any
other application you want.
CUCM Cluster V9 , Microsoft Server 2012 , Exchange 2013 and LYNC 2013.
Make sure your server is powerful in the first place and that will not cost
you more than $950 from ebay.com.
For the routers and switches If you bought it as components and you would
like to sell it as component it will still sell slightly more or less than
the price you get.
I see don't hesitate just buy your homelab nowadays from ebay.com and Never
give up.
If you have only this year for this current version then keep calm and
carry on.
Study and If you didn't pass schedule a test every 30 days exactly till the
abolishment date.
You will find a spot somewhere for sure whether in SJC , RTP , Europe ,
Dubai and it worth to travel if needed.
We have to struggle for something which will give us the lifeline and CCIE
is a big lifeline for many people not necessarily R/S as it lost it's value
in the market already but CCIE Voice is unique and demanded and if you
invested 20K for lab equipment , lab attempts , workbooks and etc. believe
me you will get compensated right away as soon as you achieve it.
If you value in the market now 80K - 120K with your current experience +
CCVP then when you become CCIE V you will get a job for 150K or 150K+ then
its worth it its lifetime investment do it mate.

Thanks,
Hesham

On 30 April 2013 18:35, Bill Lake  wrote:

> I know this can be true.  When I took my lab, another version was updating
> and I talked to one of the guys taking it.  he said that all the seats were
> full for the next 6 weeks.  So if he did not pass, he most likely would not
> get another chance.  Not sure what people do, book extra labs just in
> case?  Then what do you do with the extra one if you pass?  Oh well, don't
> have to worry about that.
>
>
> On Tue, Apr 30, 2013 at 8:26 PM, Robert Thomas  wrote:
>
>>
>> Eventhough they refresh the HW I don't expect any major changes. I mean I
>> think people will continue to use 28XX series and PVDM2 for a while...
>>
>> Most likely they will upgrade to CUCM 8.6, 9 is still too early on the
>> field.  10 wont be comming out until next year to the customers.
>>
>> The only thing that concerns me, is if they anounce a change, everyone is
>> going to book their last attempts and buyout any remaining spots for the
>> year.
>>
>> Cisco might go for a refresher just to "increase demand" for spots
>>
>>
>>
>>
>>
>>
>> On Sun, Apr 28, 2013 at 12:02 PM, Bill  wrote:
>>
>>> If they announce a new version in June you will have about 6 months from
>>> then to pass your lab.
>>>
>>> My recommendation from there is if you have plenty of study/lab time
>>> then go for it.  If you don't and have to squeeze it in then you might be
>>> better off waiting to see.
>>>
>>>  My thought is that 600 to 1200 hours of lab time is needed, more if you
>>> spread it out and less if you can focus solely on Cisco voice stuff.
>>>
>>> Sent from my iPad
>>>
>>> On Apr 28, 2013, at 12:38 PM, Alex Mendoza 
>>> wrote:
>>>
>>> Did you know the official date for new version?
>>>
>>> I assume that I'll be ready for Sep/oct 2013
>>>
>>> Best Regards
>>>
>>> AA Mendoza
>>> Sent from my iPhone 
>>>
>>> On 28/04/2013, at 10:33, Robert Thomas  wrote:
>>>
>>> Hi,
>>>
>>> I'm thinking on buying a home lab to start my studies.
>>> It would run around 3K investment according to my amazon shopping list.
>>>
>>> However I'm thinking to wait for June and Cisco Live
>>> for announcement about the new version.
>>>
>>> I don't expect major changes on the setup, perhaps some new phone models
>>> like 99XX, or 89XX on the phones. And upgrade to the routers 29XX.
>>>
>>> However I don't expect major new features from the 29XX roll out on the
>>> exam.
>>>
>>> I would appreciate your opinions on this.
>>>
>>> --
>>> Robert Thomas Zamora
>>> tho...@gmail.com +50689389544
>>> http://cr.linkedin.com/pub/robert-thomas-zamora/29/913/8a8
>>> CCNP, CCNP Voice
>>>
>>> ___
>>> For more information regarding industry leading CCIE Lab training,
>>> please visit www.ipexpert.com
>>>
>>> Are you a CCNP or CCIE and looking for a job? Check out
>>> www.PlatinumPlacement.com
>>>
>>> ___
>>> For more information regarding industry leading CCIE Lab training,
>>> please visit www.ipexpert.com
>>>
>>> Are you a CCNP or CCIE and looking for a job? Check out
>>> www.PlatinumPlacement.com
>>>
>>>
>>
>>
>> --
>> Robert Thomas Zamora
>> tho...@gmail.com +50689389544
>> http://cr.linkedin.com/pub/robert-thomas-zamora/29/913/8a8
>> CCNP, CCNP Voice
>>
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.Pl

[OSL | CCIE_Voice] Lab for sale

[Leslie Meade]

So after passing my lab, my home lab is sitting idle..
I am located in Canada, if there are any takers feel free to reach out.

Cheers

Leslie
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] MGCP Auto vs Manual configuration

[Robert Thomas]

As far I was aware those parameters are just for 6608 GW running as MGCP.
 You should not be using those for auto config.

Basically if you want to configure a fractional, just throug the command
manually and modify the timeslots when you configure your pri-group.




On Sun, Apr 28, 2013 at 4:09 AM, Suresh Bhandari  wrote:

> I believe that when you configure fractional PRI from IOS, and if you have
> to expand the channels later, you have to reconfigure mgcp... that is you
> have to shut your voice port, controller, bind-l3 command in the D-channel
> etc
>
> On the other hand, if you have busy out the channels from the UCM, you can
> simply change the channels to required numbers, and save the service
> parameter.
>
> Please update if there are other, must be there, benefits.
>
> HTH | TIA
>
>
> On Sun, Apr 28, 2013 at 4:50 PM, CISCO CCIE VOICE 
> wrote:
>
>> What is the purpose of doing  busy out channels from 7-23 if we are its
>> not using  Fractional PRI ,If we are busy out channel from 7-23 which means
>> that we are using only 6 channels so its a fractional PRI line
>>
>> Please Experts correct us on ths...
>>
>> Thanks
>>
>>
>>
>> On Sun, Apr 28, 2013 at 11:28 AM, Suresh Bhandari wrote:
>>
>>> If you are busying out the channels in CUCM using automatic mgcp
>>> configuration, it will not be Fractional PRI... Experts, please correct me
>>> if I am wrong!
>>>
>>>
>>> On Sun, Apr 28, 2013 at 2:01 PM, CISCO CCIE VOICE >> > wrote:
>>>
 HI Thanks Again, So i can use Fractional T1/E1 PRI with Automatic
 MGCP Configuration?


 On Sun, Apr 28, 2013 at 10:56 AM, Suresh Bhandari 
 wrote:

> Regarding your question about busyout channels in CUCM, you will use
> the MGCP gateway address as appeared in your CUCM gateway page and busyout
> channels using 1.
>
> You can find a good example by clicking the parameter.
> For your reference, for say your SA site, the SP "Change B-Channel
> Maintenance Status 1" will be S0/SU0/DS1-0@*SA-RTR* =  0011 
>    to busyout channels 7-23.
>
> Notice the boldface text that represents your gateway.
>
> Further, you have to check Enable status Poll in your gateway page.
>
> Hope this helps.
>
>
> On Sun, Apr 28, 2013 at 12:45 PM, CISCO CCIE VOICE <
> ccievoic...@gmail.com> wrote:
>
>> HI Thanks,
>>
>> but if suppose i want to use 6 channel from T1 PRI  on HQ Router and
>> 12 channel of E1 PRI from Branch-2 router,so how can i busy out channels
>> under service parameter ? and how does CUCM knows about which router
>> interface to busy out as i have two site with different fractional PRI
>>
>> Any reference or document on ths will be g8rt help...
>>
>> thanks
>>
>>
>> On Sun, Apr 28, 2013 at 9:46 AM, Mohamed Gazzaz 
>> wrote:
>>
>>> Pick up whatever method you are comfortable with and
>>> practice, practice. practice ..
>>>
>>> Try both methods and see which one is faster for you.
>>>
>>> --
>>> Date: Sun, 28 Apr 2013 09:10:30 +0300
>>> From: ccievoic...@gmail.com
>>> To: ccie_voice@onlinestudylist.com
>>> Subject: [OSL | CCIE_Voice] MGCP Auto vs Manual configuration
>>>
>>>
>>> Hi Experts
>>>
>>> Which method to be use in CCIE Voice lab exam in order to configure
>>> MGCP Auto or Manually.
>>>
>>>
>>> Thanks
>>>
>>>
>>>
>>>
>>> ___ For more information
>>> regarding industry leading CCIE Lab training, please visit
>>> www.ipexpert.com Are you a CCNP or CCIE and looking for a job?
>>> Check out www.PlatinumPlacement.com
>>>
>>
>>
>> ___
>> For more information regarding industry leading CCIE Lab training,
>> please visit www.ipexpert.com
>>
>> Are you a CCNP or CCIE and looking for a job? Check out
>> www.PlatinumPlacement.com
>>
>
>
>
> --
> Suresh Bhandari
>


>>>
>>>
>>> --
>>> Suresh Bhandari
>>>
>>
>>
>
>
> --
> Suresh Bhandari
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>



-- 
Robert Thomas Zamora
tho...@gmail.com +50689389544
http://cr.linkedin.com/pub/robert-thomas-zamora/29/913/8a8
CCNP, CCNP Voice
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] !!Questions on H323 trunk troubleshooting!!

[Robert Thomas]

I don't think you go for the ICT of the H323 Gateway.

The recommendation is a H225 Trunk. When you create a new trunk you have
multiple options: "ICT GK controlled, ICT non GK controlled and H255 Trunk.

I would go for the last.




On Thu, Apr 25, 2013 at 12:55 PM, ikizoo hello  wrote:

> i have different perspective,,
> according to cisco recommendation ICT is only for between 2 CUCM clusters,
> and lab requirement  saying POC of H323 trunk for PSTN access. so i would
> choose GW instead.
>
> -ikizoo
>
> --
> From: mmac...@bcbsal.org
> To: networksanitytoinsan...@gmail.com; ccie_voice@onlinestudylist.com
> Date: Thu, 25 Apr 2013 08:23:21 -0500
> Subject: Re: [OSL | CCIE_Voice] !!Questions on H323 trunk troubleshooting!!
>
>
> 1)The question says trunk so it must be a trunk (inter cluster trunk)
>
> 2) that’s more difficult.  Usually it’s a codec mismatch.  And is found in
> the trace ( I forget exact wording you are looking for).  Hopefully someone
> else can provide better detail.
>
>
>
> *M*
>
>
>
> *From:* ccie_voice-boun...@onlinestudylist.com [mailto:
> ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *sanity insanity
> *Sent:* Thursday, April 25, 2013 12:00 AM
> *To:* ccie_voice@onlinestudylist.com
> *Subject:* [OSL | CCIE_Voice] !!Questions on H323 trunk troubleshooting!!
>
>
>
>
>
> hi All,
>
> I have a few questions in relation to H323 troubleshooting
>
> We are required to provision a proof of concept (POC) H323 trunk between
> CUCM and voip service
> provider . The cucm should send H323 traffic to service provider on ip
> address XX.XX.XX.XX (public Ip address) . This call should be available for
> HQ Phones only.
> Inbound H.323 calls from VoIP service provider is not needed for the PoC
> test.
>
>
> Questions :-
>
> 1) Should we use a H323 gateway or H323 trunk ( no gatekeeper controlled)
> to achieve the above requirement?
>
> 2) If we need provide the appropriate debug or traces to verify whether or
> not
> No way audio instances prevalent for HQ Phones . Then what do we look for
> in the logs ?
>
>
> Thanks ,
> MJ
>
>
>
>
>
> ***CONFIDENTIALITY NOTICE***
> This e-mail is intended for the sole use of the individual(s) to whom it
> is addressed, and may contain information that is privileged, confidential
> and exempt from disclosure under applicable law. You are hereby notified
> that any dissemination, duplication, or distribution of this transmission
> by someone other than the intended addressee or its designated agent is
> strictly prohibited. If you receive this e-mail in error, please notify me
> immediately by replying to this e-mail.
> ___ For more information
> regarding industry leading CCIE Lab training, please visit
> www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>



-- 
Robert Thomas Zamora
tho...@gmail.com +50689389544
http://cr.linkedin.com/pub/robert-thomas-zamora/29/913/8a8
CCNP, CCNP Voice
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] CUE signaling QOS on switch

[ikizoo hello]

the way 3750 packet forwarding by using asic which is different from ios router 
dose, as a result the cli is not supported , use 'show mls qos xxx stat' 
instead.-ikizoo
Date: Wed, 17 Apr 2013 14:46:40 -0700
From: kamina.j...@yahoo.com
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] CUE signaling QOS on switch

on one of the practice lab the need is to police the signaling packets to and 
from CUE inbound into the HQ switch to 32 kbps and then remark the DSCP to 0. I 
built up the config below but dont see any packets matched on the show 
policy-map interface command. CUE IP is 10.1.6.253 . CUCM IP is 10.10.210.10 
(pub) and 10.10.210.11 (sub) .is the access list built correctly?
access-list 110 permit tcp host 10.1.6.253 any eq 2748
!
class-map match-all CUE-SIGNAL
 match access-group 110
!
policy-map CUEMAP
 class cti-qbe
 set dscp af31
 bandwidth 20
!
interface Fa0/1/0
description  HQ-ROUTER-INTERFACE service-policy input CUEMAP
mls
 qosmls qos map cos 0 8 16 24 32 46 48 56mls qos map policed-dscp 24 26 to 8

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com ___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Buying home lab or Waiting for Cisco Live in June

[Bill Lake]

I know this can be true.  When I took my lab, another version was updating
and I talked to one of the guys taking it.  he said that all the seats were
full for the next 6 weeks.  So if he did not pass, he most likely would not
get another chance.  Not sure what people do, book extra labs just in
case?  Then what do you do with the extra one if you pass?  Oh well, don't
have to worry about that.


On Tue, Apr 30, 2013 at 8:26 PM, Robert Thomas  wrote:

>
> Eventhough they refresh the HW I don't expect any major changes. I mean I
> think people will continue to use 28XX series and PVDM2 for a while...
>
> Most likely they will upgrade to CUCM 8.6, 9 is still too early on the
> field.  10 wont be comming out until next year to the customers.
>
> The only thing that concerns me, is if they anounce a change, everyone is
> going to book their last attempts and buyout any remaining spots for the
> year.
>
> Cisco might go for a refresher just to "increase demand" for spots
>
>
>
>
>
>
> On Sun, Apr 28, 2013 at 12:02 PM, Bill  wrote:
>
>> If they announce a new version in June you will have about 6 months from
>> then to pass your lab.
>>
>> My recommendation from there is if you have plenty of study/lab time then
>> go for it.  If you don't and have to squeeze it in then you might be better
>> off waiting to see.
>>
>>  My thought is that 600 to 1200 hours of lab time is needed, more if you
>> spread it out and less if you can focus solely on Cisco voice stuff.
>>
>> Sent from my iPad
>>
>> On Apr 28, 2013, at 12:38 PM, Alex Mendoza  wrote:
>>
>> Did you know the official date for new version?
>>
>> I assume that I'll be ready for Sep/oct 2013
>>
>> Best Regards
>>
>> AA Mendoza
>> Sent from my iPhone 
>>
>> On 28/04/2013, at 10:33, Robert Thomas  wrote:
>>
>> Hi,
>>
>> I'm thinking on buying a home lab to start my studies.
>> It would run around 3K investment according to my amazon shopping list.
>>
>> However I'm thinking to wait for June and Cisco Live
>> for announcement about the new version.
>>
>> I don't expect major changes on the setup, perhaps some new phone models
>> like 99XX, or 89XX on the phones. And upgrade to the routers 29XX.
>>
>> However I don't expect major new features from the 29XX roll out on the
>> exam.
>>
>> I would appreciate your opinions on this.
>>
>> --
>> Robert Thomas Zamora
>> tho...@gmail.com +50689389544
>> http://cr.linkedin.com/pub/robert-thomas-zamora/29/913/8a8
>> CCNP, CCNP Voice
>>
>> ___
>> For more information regarding industry leading CCIE Lab training, please
>> visit www.ipexpert.com
>>
>> Are you a CCNP or CCIE and looking for a job? Check out
>> www.PlatinumPlacement.com
>>
>> ___
>> For more information regarding industry leading CCIE Lab training, please
>> visit www.ipexpert.com
>>
>> Are you a CCNP or CCIE and looking for a job? Check out
>> www.PlatinumPlacement.com
>>
>>
>
>
> --
> Robert Thomas Zamora
> tho...@gmail.com +50689389544
> http://cr.linkedin.com/pub/robert-thomas-zamora/29/913/8a8
> CCNP, CCNP Voice
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Buying home lab or Waiting for Cisco Live in June

[Robert Thomas]

Eventhough they refresh the HW I don't expect any major changes. I mean I
think people will continue to use 28XX series and PVDM2 for a while...

Most likely they will upgrade to CUCM 8.6, 9 is still too early on the
field.  10 wont be comming out until next year to the customers.

The only thing that concerns me, is if they anounce a change, everyone is
going to book their last attempts and buyout any remaining spots for the
year.

Cisco might go for a refresher just to "increase demand" for spots






On Sun, Apr 28, 2013 at 12:02 PM, Bill  wrote:

> If they announce a new version in June you will have about 6 months from
> then to pass your lab.
>
> My recommendation from there is if you have plenty of study/lab time then
> go for it.  If you don't and have to squeeze it in then you might be better
> off waiting to see.
>
>  My thought is that 600 to 1200 hours of lab time is needed, more if you
> spread it out and less if you can focus solely on Cisco voice stuff.
>
> Sent from my iPad
>
> On Apr 28, 2013, at 12:38 PM, Alex Mendoza  wrote:
>
> Did you know the official date for new version?
>
> I assume that I'll be ready for Sep/oct 2013
>
> Best Regards
>
> AA Mendoza
> Sent from my iPhone 
>
> On 28/04/2013, at 10:33, Robert Thomas  wrote:
>
> Hi,
>
> I'm thinking on buying a home lab to start my studies.
> It would run around 3K investment according to my amazon shopping list.
>
> However I'm thinking to wait for June and Cisco Live
> for announcement about the new version.
>
> I don't expect major changes on the setup, perhaps some new phone models
> like 99XX, or 89XX on the phones. And upgrade to the routers 29XX.
>
> However I don't expect major new features from the 29XX roll out on the
> exam.
>
> I would appreciate your opinions on this.
>
> --
> Robert Thomas Zamora
> tho...@gmail.com +50689389544
> http://cr.linkedin.com/pub/robert-thomas-zamora/29/913/8a8
> CCNP, CCNP Voice
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
>


-- 
Robert Thomas Zamora
tho...@gmail.com +50689389544
http://cr.linkedin.com/pub/robert-thomas-zamora/29/913/8a8
CCNP, CCNP Voice
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] UCCX issue

[Alex Mendoza]

Hello Experts

Silly question, 

I'm not looking in deep regarding this but let me ask first maybe is something 
easy to resolve.

When I call from PSTN phone to IPCC CSQ (task 9.2 from kevin's videos).

I should hear "thank you for calling all representative …" instead I hear "you 
for calling all representative..."

Seems like CSQ released the audio very quick and PSTN's Phone gets the audio 
with delay.


best regards
AA



___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] can i install many phones from pc?

[Suresh Bhandari]

You can download IPblue softphone. It provides you 5 instances of phones,
enough for most of the labs. You can use it as the SCCP phone. For SIP
phone, you can use CIPC.


On Tue, Apr 30, 2013 at 5:23 PM, Amit Sharma  wrote:

> AS i am connected for lab over vpn and trying to register soft clients
> with cucm...and cme...can i use multiple phones to register?
>
> would be work if i have multiple loopback ports of network in system?
> i created 2 loopback of ethernet in system...each for each soft phone..
> can vpn adaptor sue with cipc?
>
> please help me if anyone have idea
>
> thanks
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>



-- 
Suresh Bhandari
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] can i install many phones from pc?

[Bill Lake]

Yes use loopbacks and get multilab IPBLUE softphone, it will work and I
believe IPExpert has a write up on it.

http://www.ipblue.com/download.asp?product=vtgo

Be sure to get the multilab version


On Tue, Apr 30, 2013 at 6:38 AM, Amit Sharma  wrote:

> AS i am connected for lab over vpn and trying to register soft clients
> with cucm...and cme...can i use multiple phones to register?
>
> would be work if i have multiple loopback ports of network in system?
> i created 2 loopback of ethernet in system...each for each soft phone..
> can vpn adaptor sue with cipc?
>
> please help me if anyone have idea
>
> thanks
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] STARTING PRACTICE LAB (8)

[Charlie Spencer]

I am in


On Tue, Apr 30, 2013 at 12:02 AM, Kevin Ronc  wrote:

> From today i am again starting practise for lab (-8-) if anyone interested
> please
> add me in skype my id is ric.terry
>
> Mostly want to discuss about H323 Troubleshooting which ciso has added in
> lab
>
> FASTSTART INBOUND / OUTBOUND
>
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] can i install many phones from pc?

[Amit Sharma]

AS i am connected for lab over vpn and trying to register soft clients with
cucm...and cme...can i use multiple phones to register?

would be work if i have multiple loopback ports of network in system?
i created 2 loopback of ethernet in system...each for each soft phone..
can vpn adaptor sue with cipc?

please help me if anyone have idea

thanks
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Network hold audio source

[Suresh Bhandari]

Please discard this question, as it is now resolved.

The mistake was MRG was not selected in the MRGL :(

Thanks.


On Tue, Apr 30, 2013 at 10:59 AM, Suresh Bhandari wrote:

> Sergey,
>
> The codec used is g711. IP voice media streaming is set to default, that
> is, using g711.
>
> When I set no MRGL on the DP, there is the default MoH. But when I set DP
> MRGL to Publisher MoH, and Network hold audio source of the CUCM Telephony
> CCG to another MoH source (ringback2.wav from uccx server set as alternate
> MoH/ringback), I hear nothing on the caller when the agent phone is ringing.
>
> A simple script (provided by IPExpert for the task) with queue prompt,
> call hold, 30 sec break for MoH, call unhold is used.
>
> Any idea now?
>
>
>
> On Mon, Apr 29, 2013 at 11:19 PM, Sergey Heyphets wrote:
>
>> Not knowing, your environment, just a wild guess that you may be using
>> G729 codec in UCCX, but your IP Voice Streaming Media service is configured
>> (by default) to provide music on hold using G711 codec only.
>>
>> Sergey
>>
>>
>> On Mon, Apr 29, 2013 at 1:01 PM, Suresh Bhandari wrote:
>>
>>> Experts!
>>>
>>> Objective is to provide the caller the ringback tone when it is
>>> forwarded to an agent. (5 Lab Workbook lab 4 script)
>>>
>>> Even after configuring the Network hold audio source for the CM
>>> Telephony Group to provide ringback to the caller, caller is not getting
>>> it! Followed the steps in the DSG but no avail :(
>>>
>>> What probably am I missing?
>>>
>>> --
>>> Suresh Bhandari
>>>
>>> ___
>>> For more information regarding industry leading CCIE Lab training,
>>> please visit www.ipexpert.com
>>>
>>> Are you a CCNP or CCIE and looking for a job? Check out
>>> www.PlatinumPlacement.com
>>>
>>
>>
>> ___
>> For more information regarding industry leading CCIE Lab training, please
>> visit www.ipexpert.com
>>
>> Are you a CCNP or CCIE and looking for a job? Check out
>> www.PlatinumPlacement.com
>>
>
>
>
> --
> Suresh Bhandari
>



-- 
Suresh Bhandari
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] IPCC Problem

[CISCO CCIE VOICE]

I am facing the same problem when is use  default icd.aef script
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] IPCC Problem

[CISCO CCIE VOICE]

Hi,
whn i call frm PSTN to 2022400 it play the " Thank you for calling" then
"Thank You for waiting, we wll connect you with our Agent HQ1 " then i am
getting MOH audio after that call will goes to Site B Phone 1 and play the
prompt as ""Thank You for waiting, we wll connect you with our Agent
SiteB1" and then i am able hear MOH audio .After that i getting "i am sorry
we r currently facing system problm and r unable t process ur call





On Tue, Apr 30, 2013 at 9:26 AM, Hesham Abdelkereem <
heshamcentr...@gmail.com> wrote:

> Thats definitely a wrong script was made however ,
> If you want to update the script make the following steps
>
> 1-Edit the script on the UCCX Editor Application
> 2-Save As anything (the old name same as listed on UCCX Admin)
> 3-Validate the script on UCCX Editor and make sure its successfully
> validated
> 4-Then go to UCCX Admin > Script Management -> Upload the Script
> --> Overwrite the Script --> Then Refresh The Script
> 5-Refresh the Application Script
>
> Then you should be good to go
>
> Thanks,
> Hesham
>
>
> On 29 April 2013 23:03, CISCO CCIE VOICE  wrote:
>
>> Hi Experts,
>>
>> I am getting an error "i am sorry we r currently facing system problm and
>> r unable t process ur call" during CSQ
>>
>> Thanks
>>
>>
>> ___
>> For more information regarding industry leading CCIE Lab training, please
>> visit www.ipexpert.com
>>
>> Are you a CCNP or CCIE and looking for a job? Check out
>> www.PlatinumPlacement.com
>>
>
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com