Re: [OSL | CCIE_Voice] UCCX prompt recording.

2013-06-14 Thread Gurpreet Singh Kukreja
Drake,

Not sure if this is still an open question but the location where the
Spoken Name upload prompts are stored on the server is, "*C:\Program
Files\wfavvid\tomcat_appadmin\webapps\appadmin\upload*"

Let me know if that is what you're looking for?


Regards
Gurpreet




On Fri, Jun 7, 2013 at 12:28 PM, Drake J  wrote:

> Hello Guys,
>
> I have a  few questions on UCCX script for recording a prompt
>
> 1) How do I find out where my recorded  prompt is being stored for  a
> recording script I create?
>
>
> 2) If I am using spoken name upload  and then using the Upload prompt (
> step)  just before the terminate step in the script then how do find where
> my recording has been stored?
>
>
> Many times  in question ( 2) I can hear my recorded prompt . But when I
> search for it I don't find it.
> I checked the wfavvid folder as well and prompts section.
>
> Can someone help me out with the above  2 questions?
>
> Regards,
> Drake
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] BLUE Screen on SC Phones.

2013-06-14 Thread Barrera, Hugo
Didn’t fully read trail…is this a hardware vpn setup?


From: ccie_voice-boun...@onlinestudylist.com 
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Karen Johnson
Sent: Friday, June 14, 2013 1:03 PM
To: michael.se...@compucom.com; ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] BLUE Screen on SC Phones.

Mike and others,

thanks lot, now the blue screen phone  works.  i haven't try to put back to 
default background.
When i power up next morning, it just work and poick up the DN from UCM. 
Mistery to me.

K

From: "michael.se...@compucom.com" 
mailto:michael.se...@compucom.com>>
To: karen.johnson...@yahoo.ca; 
ccie_voice@onlinestudylist.com
Sent: Thursday, June 13, 2013 10:18:50 AM
Subject: RE: BLUE Screen on SC Phones.

Karen,

I really can’t explain it, technically I can’t explain why this happens.  My 
screens on SC phones turned bright blue with no information and the phones were 
registered.  Finally, in desperation I tried changing the phones back to the 
default background image and it worked.

I also put other background images on the phones and it worked also.  Good Luck.

Michael Sears, CCIE(V)#38404
Cisco Certified Unfied Communications Computing Systems Specialist
E911 Infrastructure Specialist

“Designing and Implementing Cisco Unified Communications on Unified Computing 
Systems”

From: Karen Johnson [mailto:karen.johnson...@yahoo.ca]
Sent: Thursday, June 13, 2013 10:13 AM
To: Sears, Michael (msears); 
ccie_voice@onlinestudylist.com
Subject: Re: BLUE Screen on SC Phones.

ah will test that in moment and update you. but why is that ?


From: "michael.se...@compucom.com" 
mailto:michael.se...@compucom.com>>
To: ccie_voice@onlinestudylist.com
Cc: karen.johnson...@yahoo.ca
Sent: Wednesday, June 12, 2013 7:24:54 PM
Subject: BLUE Screen on SC Phones.

Karen,

I experienced the same thing when studying for the IE in my home lab.  The 
solution for me to get rid of the very blue screen was to check the background 
image and revert to the standard image.  Then my phones showed showed correct 
information.

Michael Sears, CCIE(V)#38404
Cisco Certified Unfied Communications Computing Systems Specialist
E911 Insrastructure Specialist
Compucom Systems Western Region


___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] BLUE Screen on SC Phones.

2013-06-14 Thread Karen Johnson
Mike and others,
 
thanks lot, now the blue screen phone  works.  i haven't try to put back to 
default background.
When i power up next morning, it just work and poick up the DN from UCM. 
Mistery to me.
 
K



From: "michael.se...@compucom.com" 
To: karen.johnson...@yahoo.ca; ccie_voice@onlinestudylist.com 
Sent: Thursday, June 13, 2013 10:18:50 AM
Subject: RE: BLUE Screen on SC Phones.



Karen,
 
I really can’t explain it, technically I can’t explain why this happens.  My 
screens on SC phones turned bright blue with no information and the phones were 
registered.  Finally, in desperation I tried changing the phones back to the 
default background image and it worked.
 
I also put other background images on the phones and it worked also.  Good Luck.
 
Michael Sears, CCIE(V)#38404
Cisco Certified Unfied Communications Computing Systems Specialist
E911 Infrastructure Specialist
   
“Designing and Implementing Cisco Unified Communications on Unified Computing 
Systems”
 
From:Karen Johnson [mailto:karen.johnson...@yahoo.ca] 
Sent: Thursday, June 13, 2013 10:13 AM
To: Sears, Michael (msears); ccie_voice@onlinestudylist.com
Subject: Re: BLUE Screen on SC Phones.
 
ah will test that in moment and update you. but why is that ?
 
 



From:"michael.se...@compucom.com" 
To: ccie_voice@onlinestudylist.com 
Cc: karen.johnson...@yahoo.ca 
Sent: Wednesday, June 12, 2013 7:24:54 PM
Subject: BLUE Screen on SC Phones.

Karen,

I experienced the same thing when studying for the IE in my home lab.  The 
solution for me to get rid of the very blue screen was to check the background 
image and revert to the standard image.  Then my phones showed showed correct 
information.

Michael Sears, CCIE(V)#38404
Cisco Certified Unfied Communications Computing Systems Specialist
E911 Insrastructure Specialist
Compucom Systems Western Region___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] ip pblue multilab version..

2013-06-14 Thread Bill Lake
You have to manually change the MAC addresses on the loopback adapters
you created, I think the first one create ends with 50, so I tend to
change it to 51, 52, 53, ... as needed.

Bill

On 6/14/13, Amit Sharma  wrote:
> Hello guys..
> i have multi lab version and try to sue with cucm
> I want to know how can register multiple ip blue..
> I have 4 loop back adapter but all showing same mac address so how can i
> will use for register separate phone for this ip blue?
>
> can some one help me?
>
> --
> Thanks & Regard's
> Amit Sharma
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com


[OSL | CCIE_Voice] sip trunk

2013-06-14 Thread Dharambir kumar varma
Hi

please tell what parametres are required to integtate CUCM and siemens
sip trunk..

we have already configured sip trunk on both sides but one way calling
is there

from CUCM we are not able to call seimens extension

how can we trace trunk logs on rtmt please help if u can

-- 
 Regards,
 Dharambir Kumar
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com


Re: [OSL | CCIE_Voice] CUCM GK Port Number

2013-06-14 Thread Martin Sloan
Hey Josh,

No worries, it's great to get feedback on this.  I agree with you as well.
It has to be either a mis-wording of the task requirement or an error in
presenting the gatekeeper endpoint data.  I also think the IPExpert
material has been stellar, which made me really cautious to call it an
error in the material without getting some expert feedback.  I didn't think
there was a way to hard code the ports outside of the service parameters
but I wanted to check first.

Marty


On Fri, Jun 14, 2013 at 6:22 AM, Josh Petro  wrote:

> Marty
> Sorry to beat a dead horse but I actually think its easier that that. The
> gatekeeper signaling port from the CUCM should be in that ephemeral range
> on the left and right side of the show command by default (as shown).
> Really, I think all the question is asking is to configure the gatekeeper
> such that the CUCMs both show with the listed name as well as the other
> gateway. You are correct in that the question is listed incorrectly. The
> ephemeral ports should be x or something. IPExpert is actually pretty
> good with the proof reading of their questions compared to others I've
> seen. It is aggravating when you have to take the time to figure out an
> incorrect question though! :)
> Josh
> On Jun 13, 2013 11:56 PM, "Martin Sloan"  wrote:
>
>> Thanks, Josh. I was getting caught up because the signaling ports in the
>> output provided in the task were in the ephemeral range but the task said
>> that port matching was a requirement. Based on the feedback here, I think
>> the screen shot in the task was not right and was supposed to show the
>> ports as 1720.  If that was the case, I'd update the service parameter for
>> the gk trunk, but It seems I can't force a match on the ports that were
>> provided in the task.
>>
>> Thanks all for the help.
>>
>> Marty
>>
>> On Thursday, June 13, 2013, Josh Petro wrote:
>>
>>> Hi Marty
>>> Bill and Justin are correct in that you can change the port number in
>>> the CUCM and the Gateway to reflect the signaling port (first port) The RAS
>>> port (second port listed on the line) will be in the ephemeral range. The
>>> ephemeral port range can't be changed on the CUCM as far as I know. I also
>>> remember Vic talking about that in a VOD in volume 1 (its in the
>>> 4.6 gatekeeper section).
>>> Josh
>>>
>>>
>>> On Jun 13, 2013 7:25 PM, "Bill Lake"  wrote:
>>>
 Marty,

 You got to the first column and select System parameters then scroll
 Dow the the H323 section and there will be your 1720 and there you will put
 the name of the gk trunk setup in your trunk config

 Reset the trunk and it should start using 1720

 Sent from my iPhone

 On Jun 13, 2013, at 4:11 PM, Martin Sloan 
 wrote:

 Justin,

 Thanks for the assist!  I'm still lost on the requirement for this task
 b/c based on the output supplied, the CUCM's register with GK using ports
 40446 and 35246 (gk-trunk_1 and gk-trunk_2).  I'm not sure if:  1) I'm
 misunderstanding the question and/or output 2) The output in the task was
 supposed to show the CUCM's registered with port 1720 3) There is really a
 way to register the CUCM's with the ports they have in the output and I
 don't know how to do it.

 I've attached a SS of the section.  Can you make any suggestions?  I'm
 leaning heavily towards option 1 :-\

 Thanks,
 Marty


 On Thu, Jun 13, 2013 at 4:04 PM, Justin McIntyre <
 justin.mcint...@blackbox.com> wrote:

> With regards to your service parameter.  Just make sure that the name
> of your trunk is listed in this service parameter.  Then re-register your
> UCMs to the Gatekeeper.  Couldn't also hurt to shut / no shut the
> gatekeeper.  The service parameter is the key to what you are looking for
> here.  Depending on what time frames you have entered for your 
> registration
> timeouts you should see it repair after some time as long as you have the
> service parameter configured correctly.
>
> Thanks,
>
> Justin
>
>
> This email and any files transmitted with it are confidential and are
> intended for the sole use of the individual to whom they are addressed.
> Black Box Corporation reserves the right to scan all e-mail traffic for
> restricted content and to monitor all e-mail in general. If you are not 
> the
> intended recipient or you have received this email in error, any use,
> dissemination or forwarding of this email is strictly prohibited. If you
> have received this email in error, please notify the sender by replying to
> this email.
> ___
> For more information regarding industry leading CCIE Lab training,
> please visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>

 

 ___

[OSL | CCIE_Voice] ip pblue multilab version..

2013-06-14 Thread Amit Sharma
Hello guys..
i have multi lab version and try to sue with cucm
I want to know how can register multiple ip blue..
I have 4 loop back adapter but all showing same mac address so how can i
will use for register separate phone for this ip blue?

can some one help me?

-- 
Thanks & Regard's
Amit Sharma
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] Pre-config

2013-06-14 Thread sotetel205
Hello

can you send me Pre-config  (HQ,Br1,Br2,sw,Pstn,Fr) for ccoi-voicelab

cordially

 


jlailia imed 
Voip Administrator 
gsm:0021696819671

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com


Re: [OSL | CCIE_Voice] CUCM GK Port Number

2013-06-14 Thread Josh Petro
Marty
Sorry to beat a dead horse but I actually think its easier that that. The
gatekeeper signaling port from the CUCM should be in that ephemeral range
on the left and right side of the show command by default (as shown).
Really, I think all the question is asking is to configure the gatekeeper
such that the CUCMs both show with the listed name as well as the other
gateway. You are correct in that the question is listed incorrectly. The
ephemeral ports should be x or something. IPExpert is actually pretty
good with the proof reading of their questions compared to others I've
seen. It is aggravating when you have to take the time to figure out an
incorrect question though! :)
Josh
On Jun 13, 2013 11:56 PM, "Martin Sloan"  wrote:

> Thanks, Josh. I was getting caught up because the signaling ports in the
> output provided in the task were in the ephemeral range but the task said
> that port matching was a requirement. Based on the feedback here, I think
> the screen shot in the task was not right and was supposed to show the
> ports as 1720.  If that was the case, I'd update the service parameter for
> the gk trunk, but It seems I can't force a match on the ports that were
> provided in the task.
>
> Thanks all for the help.
>
> Marty
>
> On Thursday, June 13, 2013, Josh Petro wrote:
>
>> Hi Marty
>> Bill and Justin are correct in that you can change the port number in the
>> CUCM and the Gateway to reflect the signaling port (first port) The RAS
>> port (second port listed on the line) will be in the ephemeral range. The
>> ephemeral port range can't be changed on the CUCM as far as I know. I also
>> remember Vic talking about that in a VOD in volume 1 (its in the
>> 4.6 gatekeeper section).
>> Josh
>>
>>
>> On Jun 13, 2013 7:25 PM, "Bill Lake"  wrote:
>>
>>> Marty,
>>>
>>> You got to the first column and select System parameters then scroll Dow
>>> the the H323 section and there will be your 1720 and there you will put the
>>> name of the gk trunk setup in your trunk config
>>>
>>> Reset the trunk and it should start using 1720
>>>
>>> Sent from my iPhone
>>>
>>> On Jun 13, 2013, at 4:11 PM, Martin Sloan 
>>> wrote:
>>>
>>> Justin,
>>>
>>> Thanks for the assist!  I'm still lost on the requirement for this task
>>> b/c based on the output supplied, the CUCM's register with GK using ports
>>> 40446 and 35246 (gk-trunk_1 and gk-trunk_2).  I'm not sure if:  1) I'm
>>> misunderstanding the question and/or output 2) The output in the task was
>>> supposed to show the CUCM's registered with port 1720 3) There is really a
>>> way to register the CUCM's with the ports they have in the output and I
>>> don't know how to do it.
>>>
>>> I've attached a SS of the section.  Can you make any suggestions?  I'm
>>> leaning heavily towards option 1 :-\
>>>
>>> Thanks,
>>> Marty
>>>
>>>
>>> On Thu, Jun 13, 2013 at 4:04 PM, Justin McIntyre <
>>> justin.mcint...@blackbox.com> wrote:
>>>
 With regards to your service parameter.  Just make sure that the name
 of your trunk is listed in this service parameter.  Then re-register your
 UCMs to the Gatekeeper.  Couldn't also hurt to shut / no shut the
 gatekeeper.  The service parameter is the key to what you are looking for
 here.  Depending on what time frames you have entered for your registration
 timeouts you should see it repair after some time as long as you have the
 service parameter configured correctly.

 Thanks,

 Justin


 This email and any files transmitted with it are confidential and are
 intended for the sole use of the individual to whom they are addressed.
 Black Box Corporation reserves the right to scan all e-mail traffic for
 restricted content and to monitor all e-mail in general. If you are not the
 intended recipient or you have received this email in error, any use,
 dissemination or forwarding of this email is strictly prohibited. If you
 have received this email in error, please notify the sender by replying to
 this email.
 ___
 For more information regarding industry leading CCIE Lab training,
 please visit www.ipexpert.com

 Are you a CCNP or CCIE and looking for a job? Check out
 www.PlatinumPlacement.com

>>>
>>> 
>>>
>>> ___
>>> For more information regarding industry leading CCIE Lab training,
>>> please visit www.ipexpert.com
>>>
>>> Are you a CCNP or CCIE and looking for a job? Check out
>>> www.PlatinumPlacement.com
>>>
>>>
>>> ___
>>> For more information regarding industry leading CCIE Lab training,
>>> please visit www.ipexpert.com
>>>
>>> Are you a CCNP or CCIE and looking for a job? Check out
>>> www.PlatinumPlacement.com
>>>
>>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCI