Re: [OSL | CCIE_Voice] MVA the right way to configure it

2013-09-18 Thread Lakshmish NS
Hi,

OR

You could assign a different partition to the line that you associate with
remote destination profile. While configuring RDP, the line extension
(Towards left, the partition option is only available after saving the RDP
config) that you see is different from the line that's associated with the
phone.The extension that's associated to the MAC address (IP Phone) is
different than the the extension that's associated to the RDP. So,
assigning a different partition to the RDP line eliminates the busy trigger
problem as the phone cannot access RDP line at all.

Hope you got it.

Cheers,

Laksh


On Wed, Sep 18, 2013 at 9:55 AM, sanity insanity 
networksanitytoinsan...@gmail.com wrote:


 Hi Guys,



 I have been trying to find the right way of configuring MVA. Below is my
 configuration


 Details:
 =

 My config is following

 1) The dial-peers are set in the following way

 dial-peer voice 102 voip
  preference 2
  destination-pattern 3300
  session target ipv4:ip address of the CUCM Pub  dtmf-relay
 h245-alphanumeric
  codec g711ulaw  no vad !
 dial-peer voice 3300 pots
  service cmm
  incoming called-number 3300
  no digit-strip


 2) here is the MVA service url
 !
 application
 service cmm http://ip address of the CUCM
 Pub:8080/ccmivr/pages/IVRMainpage.vxml
 !


 3) I am stripping 3033300 coming from pstn to last  4 digits  using a
 translation-rule on the voice-port level . That is 3033300 becomes 3300
 when it
 reaches CUCM.


 4) On CUCM in the service parameters...

 Enable Mobile Voice access is set to True Mobile voice access number is
 3300
 Matching caller id with Remote Destination is Partial Match Number of
 digits of
 Caller ID Partial Match is 7

 5) The Mobility softkey has been added for on hold and connected at
 the
 softkey template level and applied to the phone ( SB PH1)


 6)At the User  SB phone 1  I have enabled Enable Mobility and Enable
 Mobile
 Voice Access
 also selected the MAC address of the phone


 7) Created a Remote Dest profile and selected user id of sb ph1 and the
 correct
 calling search space for the phone


 8) Added a Remoted Destination number of 525


 9) Also went to device  phone  and selected the Owner User ID of SB Ph1


 10) Cisco Unified Mobile Voice Access Service is running on both Sub and
 Pub on
 CUCM



 Questions :
 


 1) Do I need to change my incoming calling number (coming from pstn)  from
 525 to 9525  because the busy trigger on 3001 (phone)
 is set to 1  and therefore any other calling coming to this number will
 head to Voicemail?


 2) Anything else you find incorrect with my configuration?


 -MJ

 ___
 For more information regarding industry leading CCIE Lab training, please
 visit www.ipexpert.com

 Are you a CCNP or CCIE and looking for a job? Check out
 www.PlatinumPlacement.com

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] LAB -----8 PASSED

2013-09-18 Thread shawn roger
Well done!


On Wed, Sep 18, 2013 at 12:25 AM, tabitha soans tabi.so...@gmail.comwrote:

 Thanks to all i cleared lab 8 i am very happy thanks to everyone for the
 helps its so big lab and extremely hard to manage the time

 thanks

 ___
 For more information regarding industry leading CCIE Lab training, please
 visit www.ipexpert.com

 Are you a CCNP or CCIE and looking for a job? Check out
 www.PlatinumPlacement.com

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] CCIE Voice to CCIE Collaboration Details

2013-09-18 Thread Brian Schear
They have the details out for CCIE Voice to CCIE Collaboration migration now.

https://learningnetwork.cisco.com/docs/DOC-21915

Brian Schear
CCIE #36045 (Voice)





This communication (including any attachments) is intended only for the use of 
the individual or entity to which it is addressed, and may contain information 
that is privileged, confidential and exempt from disclosure under applicable 
law. If you are not the intended recipient, any dissemination, distribution or 
copying of this communication is strictly prohibited. If you have received this 
communication in error, please notify Vital Support Systems at 515 334 5700 and 
delete or destroy all copies and the original document.
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Voice mail to user

2013-09-18 Thread Hesham Abdelkereem
Yes mate its pretty much easy.
All you need to go
Go to Unity Connection --- User -- Say the user with 3002 --- Edit---
Alternate Extensions
in the Alternate Extensions add all the other lines on the same user for
example if the phone has 3002 , 3005 , 3010 , 3020
then add alternate extensions as 3005 , 3010 and 3020

Please let me know if you need anything else


On 18 September 2013 10:53, Dharambir kumar varma dharambi...@gmail.comwrote:

 Hi ALL,

 can we provide voice mail facility to a user having multiple cisco
 phone extensions
 when some body dial 3002, if no answer it should go to A user voice mail
 ..dial 3005 if no answer it should also go to
 A user voice mail.
 means go to  same user voice mail.

 Response will be higly appreciated..
 --
  Regards,
  Dharambir Kumar
 ___
 For more information regarding industry leading CCIE Lab training, please
 visit www.ipexpert.com

 Are you a CCNP or CCIE and looking for a job? Check out
 www.PlatinumPlacement.com

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] Voice mail to user

2013-09-18 Thread Dharambir kumar varma
Hi ALL,

can we provide voice mail facility to a user having multiple cisco
phone extensions
when some body dial 3002, if no answer it should go to A user voice mail
..dial 3005 if no answer it should also go to
A user voice mail.
means go to  same user voice mail.

Response will be higly appreciated..
-- 
 Regards,
 Dharambir Kumar
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com


Re: [OSL | CCIE_Voice] Voice mail to user

2013-09-18 Thread Dharambir kumar varma
user is not getting email notification when voice message comes.

CUE 7.0
i have done settings
1.Enable System-wide notification. Complete these steps:

a.Choose Voice Mail  Message Notification  Notification Administration.

b.Check the Enable system-wide notification forcheckbox and set for
All Messages.

c.Check the box to allow a user to log in to the voice mailbox to
retrieve voice-mail messages after notification.

d.Check the box to send voice messages as .wav file attachments to
email notification messages.

2.Go to System Domain name Settingsand set your domain name
(mycompany.com) and the DNS server(if you have DNS server).

3.Go to System  SMTP Settings and set your SMTP server address, as
well as any authentication if needed.

Note: Sending notifications to a subscriber's e-mail or text messages
to text pagers requires an SMTP server. If there is no SMTP server
configured, the system will not send the e-mail notifications.

4.Go to Configure  User choose the user and check the Enable
notification for this user box at bottom of the screen.

5.Enable the E-mail Notifification under Configure  User 
Notification tab and click on email inbox. Perform these steps:

a.Enter the email address to which the notifications should be sent in
the To: (Email address) field.

b.Enter a subject text for the email.

c.Check the box to Enable notification to this device.

d.Check the box to Attach voice message to email notification messages.

e.Set the Notification preference as All Messages

f.Set up the Notification schedule, these are the hours 00:00 AM to 12:00 AM
that e-mails will be sent.

Please assist



On 9/18/13, Hesham Abdelkereem heshamcentr...@gmail.com wrote:
 Yes mate its pretty much easy.
 All you need to go
 Go to Unity Connection --- User -- Say the user with 3002 --- Edit---
 Alternate Extensions
 in the Alternate Extensions add all the other lines on the same user for
 example if the phone has 3002 , 3005 , 3010 , 3020
 then add alternate extensions as 3005 , 3010 and 3020

 Please let me know if you need anything else


 On 18 September 2013 10:53, Dharambir kumar varma
 dharambi...@gmail.comwrote:

 Hi ALL,

 can we provide voice mail facility to a user having multiple cisco
 phone extensions
 when some body dial 3002, if no answer it should go to A user voice mail
 ..dial 3005 if no answer it should also go to
 A user voice mail.
 means go to  same user voice mail.

 Response will be higly appreciated..
 --
  Regards,
  Dharambir Kumar
 ___
 For more information regarding industry leading CCIE Lab training, please
 visit www.ipexpert.com

 Are you a CCNP or CCIE and looking for a job? Check out
 www.PlatinumPlacement.com




-- 
 Regards,
 Dharambir Kumar
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com


Re: [OSL | CCIE_Voice] CCIE Voice to CCIE Collaboration Details

2013-09-18 Thread shawn roger
Cisco is really smart :)

They need money from anywhere ha ha :)

But only 1 problem they should do option 2 till collaboration end :) not
only for 3 months that means if a person do not pass in collaboration
his voice also useless + collaboration also useless for him

They are dam smart


On Wed, Sep 18, 2013 at 11:03 PM, Brian Schear
brian.sch...@vitalsite.comwrote:

  They have the details out for CCIE Voice to CCIE Collaboration migration
 now.



 https://learningnetwork.cisco.com/docs/DOC-21915



 *Brian Schear*

 *CCIE #36045 (Voice)*





 --

 This communication (including any attachments) is intended only for the
 use of the individual or entity to which it is addressed, and may contain
 information that is privileged, confidential and exempt from disclosure
 under applicable law. If you are not the intended recipient, any
 dissemination, distribution or copying of this communication is strictly
 prohibited. If you have received this communication in error, please notify
 Vital Support Systems at 515 334 5700 and delete or destroy all copies and
 the original document.

 ___
 For more information regarding industry leading CCIE Lab training, please
 visit www.ipexpert.com

 Are you a CCNP or CCIE and looking for a job? Check out
 www.PlatinumPlacement.com

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] CCIE Voice to CCIE Collaboration Details

2013-09-18 Thread Mark Holloway
3 months?  You have until 2016 to convert from CCIE Voice to CCIE 
Collaboration. 

--snip--

Pass the CCIE Collaboration Written Exam and then permanently convert your CCIE 
Voice certification to a CCIE Collaboration certification between November 21, 
2013 and February 13, 2016. 



On Sep 18, 2013, at 6:03 PM, shawn roger shawn.roge...@gmail.com wrote:

 Cisco is really smart :)
 
 They need money from anywhere ha ha :)
 
 But only 1 problem they should do option 2 till collaboration end :) not only 
 for 3 months that means if a person do not pass in collaboration 
 his voice also useless + collaboration also useless for him 
 
 They are dam smart
 
 
 On Wed, Sep 18, 2013 at 11:03 PM, Brian Schear brian.sch...@vitalsite.com 
 wrote:
 They have the details out for CCIE Voice to CCIE Collaboration migration now.
 
  
 https://learningnetwork.cisco.com/docs/DOC-21915
 
  
 Brian Schear
 
 CCIE #36045 (Voice)
 
  
  
 
 
 This communication (including any attachments) is intended only for the use 
 of the individual or entity to which it is addressed, and may contain 
 information that is privileged, confidential and exempt from disclosure under 
 applicable law. If you are not the intended recipient, any dissemination, 
 distribution or copying of this communication is strictly prohibited. If you 
 have received this communication in error, please notify Vital Support 
 Systems at 515 334 5700 and delete or destroy all copies and the original 
 document.
 
 ___
 For more information regarding industry leading CCIE Lab training, please 
 visit www.ipexpert.com
 
 Are you a CCNP or CCIE and looking for a job? Check out 
 www.PlatinumPlacement.com
 
 ___
 For more information regarding industry leading CCIE Lab training, please 
 visit www.ipexpert.com
 
 Are you a CCNP or CCIE and looking for a job? Check out 
 www.PlatinumPlacement.com

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com