Hi,I am interested also
Original Message
Subject: Re: [OSL | CCIE_Voice] I Passed
From: Bill Lake whl...@gmail.com
Date: Fri, May 27, 2011 9:58 pm
To: Fatai Adekunle fatai_adeku...@yahoo.com
Cc: ccie_voice@onlinestudylist.com
Congratulations, No NDA Stuff but any chance you
I want to you another vendor workbook on ine rack is it possible. Do I have to configure routers from Scratch. Including the frame-relay config.Anthony
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
I want to use another vendor workbook on ine rack is it possible. Do I have to configure routers from Scratch. Including the frame-relay config.Anthony ___
For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Hi,I need help I am setting up MGCP on a 2811 router I am getting TE1-ASSIGNED.CorpHQ#debug isdn q921debug isdn q921 is ON.CorpHQ#ISDN Se0/0/0:23 Q921: User RX - SABMEp sapi=0 tei=0ISDN Se0/0/0:23 **ERROR**: L2IF_SendPkt: idb is NULLISDN Se0/0/0:23 **ERROR**: process_rxdata:L2IF_SendPkt
Hi,I need help I am setting up MGCP on a 2811 router I am getting TE1-ASSIGNED.CorpHQ#debug isdn q921debug isdn q921 is ON.CorpHQ#ISDN Se0/0/0:23 Q921: User RX - SABMEp sapi=0 tei=0ISDN Se0/0/0:23 **ERROR**: L2IF_SendPkt: idb is NULLISDN Se0/0/0:23 **ERROR**: process_rxdata:L2IF_SendPkt
Thanks
Original Message
Subject: Re: [OSL | CCIE_Voice] TEI_ASSIGNED
From: Justin Carney justin.s.car...@gmail.com
Date: Tue, October 01, 2013 5:37 pm
To: Anthony Nwachukwu anwachu...@apafrica.com
Cc: "ccie_voice@onlinestudylist.com (ccie_voice@onlinestudylist.com)"
I need with Translation -rule can someone help me explain the translation rule below.voice translation−rule 1rule 1 /^\(12\)3\(45\)$/ /6\1\2/· Set 1: 12· Set 2: 45· Ignore: 3router#test voice translation−rule 1 12345Matched with rule 1Original number: 12345 Translated number: 61245
I need help to reslove the problem with TEI_ASSIGNED on the T1 Link ISDN Serial0/0/0:23 interface dsl 0, interface ISDN Switchtype = primary-ni L2 Protocol = Q.921 0x L3 Protocol(s) = CCM MANAGER 0x0003 Layer 1 Status: ACTIVE Layer 2 Status: TEI = 0, Ces = 1, SAPI = 0, State = TEI_ASSIGNED
CorpHQ#CorpHQ#ISDN Se0/0/0:23 Q921: User RX - SABMEp sapi=0 tei=0ISDN Se0/0/0:23 Q921: S4_SABME: BACKHAULED vsc_wants_L2_up = FALSEISDN Se0/0/0:23 Q921: User RX - SABMEp sapi=0 tei=0ISDN Se0/0/0:23 Q921: S4_SABME: BACKHAULED vsc_wants_L2_up = FALSECorpHQ#CorpHQ#ISDN Se0/0/0:23 Q921: User RX -
Hi,I need some one to breakdown the commands below. dial-peer voice 3000 voip Destination-pattern 3...$Preference 1session target ipv4: 142.5.64.12voice-class h323 1voice-class codec 1dtmf-relay h245-alphanumericincoming called-number .ip qos dscp cs3 signalingno vaddial-peer voice 3001
Hi,Can some one break down this for me.Voice translation-rule 97 Rule 1 /^.*\(3…$\)/ /\1/exitVoice translation-profile TELCOTranslate called 97Apply this Translation –profile on voice portvoice-port 0/0/0:23Translation-profile incoming TELCO
___
For more
Hi,I need someone to help me explain the translation-rule below.This having issues with thisvoice translation-rule 1rule 1 /0803902\(3\)$/ /\1/rule 2 /^3/ /0803902/rule 3 /4/ /0803902/rule 4 /5/ /0803902/!voice translation-rule 2rule 1 /0803902\(3\)$/ /\1/rule 2 /^3/ /+234803902/rule 3 /4/
Hi,Can someone explain the Route Patterns below.9.1(2-9)XX[2-9]XX9011.!9011.!#9.1(2-9)XX[2-9]XXCheers
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a
HI,
i need some to help me explain the rule below on the router.
R2(config)#voice translation-rule 1
R2(cfg-translation-rule)#rule 1 /^.*\(3...\)$/ /\1/
R2(config)#voice translation-rule 2
R2(cfg-translation-rule)#rule 1 /^3...$/ /972303/ type any national plan any
isdn
R2(config)#voice
Hi,
I need help with explanation of the dial-peer below.
R2(config-dial-peer)#destination-pattern 9[2-9]..
R2(config-dial-peer)#port 1/0/0:23
R2(config)#dial-peer voice 91 pots
R2(config-dial-peer)#translation-profile outgoing nat
R2(config-dial-peer)#destination-pattern
Hi,
I need help with explanation of the
R2(config-dial-peer)#destination-pattern 9[2-9]..
R2(config-dial-peer)#port 1/0/0:23
R2(config)#dial-peer voice 91 pots
R2(config-dial-peer)#translation-profile outgoing nat
R2(config-dial-peer)#destination-pattern 91[2-9]..[2-9]..
Can some one help explain the rule below.
Voice translation-rule 97
Rule 1 /^.*\(3hellip;$\)/ /\1/
exit
Voice translation-profile TELCO
Translate called 97
___
For more information regarding industry leading CCIE Lab training, please visit
17 matches
Mail list logo