Anyone has any thoughts of the interaction between Extension Mobility and Local
Route Group? Assuming HQ and BR1 have configured call routing via Local Route
Group. Any suggestions?
___
For more information regarding industry leading CCIE Lab
the current local gateway is
based on Device Pool settings. As a result, his local/long distance call might
not be correct. Any suggestion?
Thanks,
From: Ahmed Ellboudy ahmed_ellbo...@rayacorp.com
To: Qq Ccie cci...@yahoo.com; ccie_voice@onlinestudylist.com
Sent
for 919 area code?
From: Ki Wi kiwi.vo...@gmail.com
To: Qq Ccie cci...@yahoo.com
Cc: ccie_voice@onlinestudylist.com
Sent: Sun, June 5, 2011 11:39:36 PM
Subject: Re: [OSL | CCIE_Voice] Extension Mobility and Local Route Group
In that case, you have a great time of converting everything to e164. =P
Non trust on branches would likely get you the points. However, I have the
same
question as Emin. Can't we configure trust on branches to match on the HQ
side,
especially if there aren't any requirements?
From: Emin Guliyev eguli...@fidelus.com
To: Rogers
I though the CSS on device pool mean for Device Mobility only, not for
Extension
Mobility?
From: Brian btmulg...@gmail.com
To: Qq Ccie cci...@yahoo.com
Cc: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com
Sent: Mon, June 6, 2011 1:06:09 PM
Thanks Cristobal. So Globalized dialing is a prerequisite as well?
From: Cristobal Priego cristobalpri...@gmail.com
To: Qq Ccie cci...@yahoo.com
Cc: Brian btmulg...@gmail.com; ccie_voice@onlinestudylist.com
ccie_voice@onlinestudylist.com
Sent: Mon, June 6
You would need to configure either zone prefix (priority) or tech-prefix for
routing within local zone GK.
From: naser jalouk naser.jal...@gmail.com
To: edot...@ams.net
Cc: ccie_voice@onlinestudylist.com
Sent: Mon, June 6, 2011 6:45:12 PM
Subject: Re: [OSL |
You can use RP to manipulate phone display knowing such changes will be
overwritten by the called party transformation later on.
From: cisco cisco ciscocci...@gmail.com
To: ccie_voice@onlinestudylist.com
Sent: Tue, June 7, 2011 6:01:41 PM
Subject: Re: [OSL |
best practice is on the gateway because most likely you will need it it in SRST
mode as well.
voice translation-rule 10
rule 1 // // type any local
voice translation-profile local
translate called 10
dial-peer voice 97 pots
destination-pattern 9[2-9]..
translation-profile outgoing local
try to enable dhcp debugging and see what is happening
deb ip dhcp server packet
From: Voiper datapack...@gmail.com
To: ccie_voice@onlinestudylist.com
Sent: Thu, June 9, 2011 7:44:23 AM
Subject: [OSL | CCIE_Voice] pstn phone not getting dhcp address
Hi
did you need a xcoder for branches to access the route points?
From: ccieid1ot ccieid...@gmail.com
To: Michael Luo hout...@gmail.com
Cc: ccie_voice@onlinestudylist.com
Sent: Thu, June 9, 2011 10:48:42 AM
Subject: Re: [OSL | CCIE_Voice] UCCX grading
Were they
It is an obsolete command and you would not need it. Similarly, you would
never
need to configure a sip security profile to integrate with cups.
From: Michael Luo hout...@gmail.com
To: ccie_voice@onlinestudylist.com
Sent: Thu, June 9, 2011 9:20:38 PM
: George Goglidze gogli...@gmail.com
To: Qq Ccie cci...@yahoo.com
Cc: Michael Luo hout...@gmail.com; ccie_voice@onlinestudylist.com
Sent: Fri, June 10, 2011 9:14:02 AM
Subject: Re: [OSL | CCIE_Voice] MGCP to H323 fallback
presence will not work properly if you don't modify default SIP Trunk Security
yeah, you don't need it for the lab. Not sure if you need it for real life or
not.
From: Randall Saborio ill2...@gmail.com
To: Qq Ccie cci...@yahoo.com
Cc: Michael Luo hout...@gmail.com; ccie_voice@onlinestudylist.com
Sent: Fri, June 10, 2011 11:32:45 AM
Inline
From: Michael Luo hout...@gmail.com
To: ccie_voice@onlinestudylist.com
Sent: Fri, June 10, 2011 1:20:20 PM
Subject: [OSL | CCIE_Voice] irrelevant commands
From my observation, the biggest challenge in voice lab was - some of the
irrelevant commands
Add display name to rdp and let me know if it helps
Sent from my iPad
On Jul 17, 2011, at 1:14 PM, Peter peter.imman...@rediffmail.com wrote:
Hi,
MVA has been configured for BR1 which is a H.323 Gateway. Users are getting
authenticated and are able to make calls. But for the outgoing
Utils dbreplication reset all
Should work
Sent from my iPad
On Aug 2, 2011, at 4:18 AM, Moataz Mamdouh moataz_m...@yahoo.com wrote:
Hello
this is a very known problem , i faced it during my study and any DB
replication commands issues will not solve the problem .
so my advise to you is
Is there a need to configure clock on the router? No phone will take clock
from the router. Unless it is explicitly being asked, ntp server setting
should be sufficient. Anyone who got full point can comment on it.
Sent from my iPad
On Sep 8, 2011, at 12:47 PM, Adil Shaikh
Moh from router flash is different from cucm multicasting. The difference lies
in router config only. For cucm multicasting, you need to enable ip
multicast-routing and ip pim dense mode on the interfaces. However, in case of
moh from flash, you should not do these steps. Instead, you flood
I have a Dell PowerEdge T110 for sale with the following setup.
CPU Cores: 4 CPUs x 2.526 GHz
Processor Type: Intel(R) Xeon(R) CPU X3440@ 2.53 GHz
Logical Processors: 8
Memory: 8 G
Hard drive: 1 TB
Software:
VMWare ESXi 4.1.0 (License
Dell PowerEdge T110 for sale with the following setup.
CPU Cores: 4 CPUs x 2.526 GHz
Processor Type: Intel(R) Xeon(R) CPU X3440@ 2.53 GHz
Logical Processors: 8
Memory: 8 G
Hard drive: 1 TB
Software:
VMWare ESXi 4.1.0 (License vSphere 4
Sold.
From: Qq Ccie cci...@yahoo.com
To: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com
Sent: Monday, January 16, 2012 2:25 PM
Subject: [OSL | CCIE_Voice] ccie voice lab equipment for sale
Dell PowerEdge T110 for sale with the following
22 matches
Mail list logo