Hi All,
I have my Lab setup done and have started practicing.
On technical side, I have 24 hrs Lab access, so i can practice and get
better on it.
I have not taken any professional help from any vendors. Till now all my
learning is self study and job exp. only.
Do you know which vendor will be
Hi All,
Will the pressing Tab help be available during CCIE Voice Lab exam?
Is Fax also part of syllabus ?
Will configuration of FXS post be there in exam ?
Kindly clarify,
Regards,
Aman
___
For more information regarding industry leading CCIE Lab
When I am applying ip pim sparse-dense mode on virtual template 200 of HQ
and BR1 routers,
Which are connected by Frame relay ,. The Two routers stop pinging each
other.
What could be the issue.??
___
For more information regarding industry leading CCIE
-- Forwarded message --
From: aman sinha aman.i...@gmail.com
Date: Fri, Aug 2, 2013 at 1:21 PM
Subject: Multicast MOH to BR1
To: ccie_vo...@onlinestudylist.co
I want multicast to be played frmo HQ to BR1
When I am applying ip pim sparse-dense mode on virtual template 200
Hi All,
Config : XYZ --G729- SiteA_Region
Just discovered why Changing the Name of Default Region to SiteA_Region
is done instead of making a new Region called SiteA_Region.
While receiving call from Gatekeeper (Region XYZ) to Site A Phone (Region
SiteA_Region)
the show gatekeeper calls
Hi All ,
Tested the 2nd scenarios as well. That is also a correct resolution.
Now I am more confused , How can a Inter-region call be affected by an
Intraregion Service Parameter Setting ?
On Thu, Aug 8, 2013 at 3:24 PM, aman sinha aman.i...@gmail.com wrote:
Hi All,
Config : XYZ
Hi All ..
In Lab 5 Hand book -- 5th Lab,
Not Unity Connection not recognizing the password (no DTMF) when the call
is routed as following during a high availability situation. DTMF via SIP
Trunk works fine.
Call flow with DTMF Problem:
SiteB PH2 --- MGCP T1 Port of SiteB GW My PSTN GW
all sites via pots dialpeers) - SiteA H323 GW - CUCM
SUB Unity Connection.
Regards,
Aman
On Fri, Aug 9, 2013 at 3:34 PM, aman sinha aman.i...@gmail.com wrote:
Hi All ..
In Lab 5 Hand book -- 5th Lab,
Not Unity Connection not recognizing the password (no DTMF) when the call
.
I have not gone through those questions : but following is my
interpretation.
the setting must be done in the Unity Connection .. and Call handler would
be setup for the 4 digit calling number.
VM Mask keeps the calling number to last 4 digits
If this is not configured, your calling number
then Telnet/SSH to the MGCP Gateway/Router itself then conf t
and then NO MGCP then MGCP
See if that will work
Thanks,
Hesham
On 2 September 2013 23:58, aman sinha aman.i...@gmail.com wrote:
Hi All.
Prefixing +44 in calling number is not working on MGCP gateways.
Any suggestions
What is difference between commands:
isdn outgoing display-ie
and
isdn outgoing ie display
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
I have this same issue.
Any solutions ? What am I missing ?
http://www.voiceie.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=8;t=002216
Regards,
Aman
___
Free CCIE RS, Collaboration, Data Center, Wireless Security Videos ::
iPexpert on YouTube:
Thanks,
Found problem - sdspfarm transcode sessions 2
was missing in telephony-services.
On Thu, Dec 12, 2013 at 12:53 PM, aman sinha aman.i...@gmail.com wrote:
This is codec negotiation issue. Transcoder is not is not working.
HQ to Site C is g729ulaw, while CUE uses G711ulaw.
I verified
This is codec negotiation issue. Transcoder is not is not working.
HQ to Site C is g729ulaw, while CUE uses G711ulaw.
I verified by using G711ulaw between HQ and SiteC. Everything worked fine.
What did I miss in transcoder?
On Thu, Dec 12, 2013 at 12:28 PM, aman sinha aman.i...@gmail.com wrote
14 matches
Mail list logo
