You forgot service mgcp at the end of your pri-group command in controller
config.
Sent from my Verizon Wireless Phone
- Reply message -
From: Jeff Price (jeffpric) jeffp...@cisco.com
Date: Fri, May 21, 2010 6:55 pm
Subject: [OSL | CCIE_Voice] Unable to Bind L3 to CCM
To: CCIE Voice
Just give the phones the trnsfvm softkey.
Brian
- Reply message -
From: Ashar Siddiqui siddas...@gmail.com
Date: Wed, May 26, 2010 7:03 am
Subject: [OSL | CCIE_Voice] Direct transfer to Original called party
Voicemail
To: r.ochi...@mfient.com
Cc: 'osl osl'
Also if the vlans are disabled. Make sure the vlans are active.
Sent from my Verizon Wireless Phone
- Reply message -
From: Amy Ryan ar...@ipexpert.com
Date: Fri, Jun 4, 2010 7:33 am
Subject: [OSL | CCIE_Voice] VLAN interfaces down
To: Angel Perez gorr...@hotmail.com,
Congrats!
Sent from my Verizon Wireless Phone
- Reply message -
From: wolfsrudel wolfsru...@gmail.com
Date: Sat, Jun 5, 2010 11:32 am
Subject: [OSL | CCIE_Voice] Passed CCIE Voice ( # 26129 )
To: Moataz Mamdouh moataz_m...@yahoo.com
Cc: ccie_voice@onlinestudylist.com
congratulations
On the hwic ports on the router, you should use the trunk method.
On the 3750, you should use the access port method.
Brian
Sent from my Verizon Wireless Phone
- Reply message -
From: Dew Swen dew.s...@gmail.com
Date: Tue, Jun 8, 2010 9:19 am
Subject: [OSL | CCIE_Voice] CCIE voice
Just make 2999 an alternate ext of 2602.
HTH,
Brian
- Reply message -
From: Ashar Siddiqui siddas...@gmail.com
Date: Wed, Jun 9, 2010 8:37 am
Subject: [OSL | CCIE_Voice] CUC Voicmeail diversion
To: 'wolfsrudel' wolfsru...@gmail.com, ccie_voice@onlinestudylist.com
Thanks Wolf,
If I
Do your phones and gateways have the pt-vm partition in their css?
Brian
Sent from my Verizon Wireless Phone
- Reply message -
From: Pavan K pav.c...@gmail.com
Date: Wed, Jun 9, 2010 9:14 pm
Subject: [OSL | CCIE_Voice] CUE integration with CCM problems
To: osl osl
Used pod 12 last night without incident.
Brian
- Reply message -
From: Matthew Berry ciscovoiceg...@gmail.com
Date: Sun, Jun 13, 2010 5:09 pm
Subject: [OSL | CCIE_Voice] VMware Connectivity and VLAN Interface Issues
To: OSL Group ccie_voice@onlinestudylist.com
Has anyone else
Yes. On your remote destination, don't put any leading digits. Don't put the 9
trunk access code. Leave it the same as your mobile ani.
Use application dial rules to prefix the trunk access code. Mobile connect uses
application dial rules to xform the redirecting number.
MVA doesn't like
Open a TAC case with Cisco.
- Reply message -
From: Saeed IDris saee...@gmail.com
Date: Thu, Jul 1, 2010 1:10 pm
Subject: [OSL | CCIE_Voice] Fwd: VOIP issue between CUCM 7 to UC500
To: ccie_voice@onlinestudylist.com
Hi expert,
I have strange issue with VOIP calls between two sites, the
I think its easy to test with a simple acl on hq-rtr.
If br1phn2 is 192.168.5.13, my acl is
ip access-list extended SRST
deny ip 10.10.201.0 0.0.0.255 10.10.210.0 0.0.0.255
deny ip host 10.10.110.2 10.10.210.0 0.0.0.255
deny ip host 192.168.5.13 10.10.210.0 0.0.0.255
permit ip any any
Thanks for clarifying!
Brian
- Reply message -
From: Vik Malhi vma...@ipexpert.com
Date: Wed, Jul 7, 2010 6:08 pm
Subject: VATS in the VOD
To: Brian Valentine bkvalent...@gmail.com, OSL Group
ccie_voice@onlinestudylist.com
Fragmentation values should be based on sending rate when
A router that has ntp server configured also acts as a server. You don't
need ntp master to act as a server.
Brian
- Reply message -
From: cisco voip voip.ccieci...@gmail.com
Date: Thu, Jul 8, 2010 10:42 pm
Subject: [OSL | CCIE_Voice] NTP
To: Mark Holloway m...@markholloway.com
Cc: OSL
Do not use SIP-notify. Use rtp-nte for sip endpoints on cucme.
Sent from my Verizon Wireless Phone
- Reply message -
From: Miron Kobelski findko...@gmail.com
Date: Sat, Jul 10, 2010 3:50 pm
Subject: [OSL | CCIE_Voice] problems getting SIP phone registered to BR2
To: CCIE Voice
Is your ip source address on the phones config as the srst? Is that interface
up/up? Ntp status?
- Reply message -
From: ccieid1ot ccieid...@gmail.com
Date: Wed, Jul 14, 2010 6:20 pm
Subject: [OSL | CCIE_Voice] CME SRST Mode
To: ccie_voice@onlinestudylist.com
Phones are sccp in cucm?
Sent from my Verizon Wireless Phone
- Reply message -
From: ccieid1ot ccieid...@gmail.com
Date: Wed, Jul 14, 2010 7:53 pm
Subject: [OSL | CCIE_Voice] CME SRST Mode
To: CCIE Voice ccievoiced...@gmail.com
Cc: ccie_voice@onlinestudylist.com
I had to bootload it during my session today. It was stuck in and endless
reboot loop. Thought about reporting it. Figured it was worth the effort to
learn the process. I thought I had fixed it. It worked after I reimaged it.
Brian
- Reply message -
From: Erwan Erwan
Bump
- Reply message -
From: Brian Valentine bkvalent...@gmail.com
Date: Sat, Jul 17, 2010 9:04 pm
Subject: CUE CLI UserPrompt
To: OSL Group ccie_voice@onlinestudylist.com
I'm experimenting with the CLI on CUE. I'm trying to figure out how
much I can do from the Command Line. So
Just transfer the caller to the meet me extension.
Select and join are for ad-hoc.
- Reply message -
From: Pavan pav.c...@gmail.com
Date: Thu, Jul 22, 2010 7:16 am
Subject: [OSL | CCIE_Voice] Meetme: cannot use join select softkeys to join 3rd
call to meetme conference
To: jeremy co
Guys be careful. Score reports are subject to NDA.
- Reply message -
From: Daniel Berlinski dberlin...@gmail.com
Date: Thu, Jul 29, 2010 6:14 pm
Subject: [OSL | CCIE_Voice] First attempt
To: CCIE Voice GMAIL givemeccievoice2...@gmail.com
Cc: OSL Group ccie_voice@onlinestudylist.com
I've
I believe the qos srnd is provided on the computer's desktop in off format
when you take the lab exam. No need to find it through the web interface.
- Reply message -
From: CCIE Voice GMAIL givemeccievoice2...@gmail.com
Date: Tue, Aug 3, 2010 6:02 pm
Subject: [OSL | CCIE_Voice]
Yes. On the SIP trunk in cucm, make sure to enable outbound redirect.
Enjoy.
Brian
- Reply message -
From: Ryan Schwab schwab...@shaw.ca
Date: Thu, Aug 5, 2010 7:48 pm
Subject: [OSL | CCIE_Voice] SIP Integration between CUCM and CUC
To: OSL Group ccie_voice@onlinestudylist.com
I've
You built a cupc phone is cucm with device name UPCUSERNAME?
You can collect detailed cupc logs from within the cupc client to see why it is
failing.
Brian
- Reply message -
From: Warren Heaviside (wheavisi) wheav...@cisco.com
Date: Sun, Aug 8, 2010 7:56 pm
Subject: [OSL |
I once forgot to put a default gateway in my dhcp scope. Makes it hard for the
dhcp session to transition to unicast.
Also, if the ip helper-address command is absent or misconfigured.
The voice vlan on the branch router does not exist or has been disabled.
Brian
- Reply message
Congrats! Well done. It's an amazing accomplishment.
- Reply message -
From: Matthew Hall 1.matt.h...@gmail.com
Date: Tue, Aug 17, 2010 6:19 pm
Subject: [OSL | CCIE_Voice] CCIE #26721 - I PASSED!
To: Matthew Berry ciscovoiceg...@gmail.com
Cc: CCIE Voice OSL
CONGRATS!
Sent from my Verizon Wireless Phone
- Reply message -
From: Beck, Ken kb...@vectorusa.com
Date: Wed, Aug 18, 2010 8:45 pm
Subject: [OSL | CCIE_Voice] I have a Question?
To: ccie_voice@onlinestudylist.com
What do I do with my time now that I
Bingo. Endpoint resource-threshold was missing. Thanks.
- Reply message -
From: Miron Kobelski findko...@gmail.com
Date: Thu, Aug 19, 2010 1:29 pm
Subject: [OSL | CCIE_Voice] gatekeeper max calls per endpoint
To: Brian Valentine bkvalent...@gmail.com
Cc: OSL Group ccie_voice
Change the dtmf relay on the voice register pool to rtp-nte.
Brian
- Reply message -
From: DeShon Crayton dcrayto...@comcast.net
Date: Thu, Aug 19, 2010 8:33 pm
Subject: [OSL | CCIE_Voice] SIP Phone Not Cancelling Session Upon Request
To: ccie_voice@onlinestudylist.com
I am running IOS
?
Brian
- Reply message -
From: DeShon Crayton dcrayto...@gmail.com
Date: Thu, Aug 19, 2010 9:18 pm
Subject: [OSL | CCIE_Voice] SIP Phone Not Cancelling Session Upon Request
To: bkvalent...@gmail.com bkvalent...@gmail.com
Cc: DeShon Crayton dcrayto...@comcast.net, ccie_voice
That's the dhcp pool for the remote phones. Are you doing a hardware vpn? If
so, create a similar scope for your local phones. Otherwise, manually assign
ips and tftp.
Brian
- Reply message -
From: Pithog Oil pithog...@yahoo.com
Date: Sat, Aug 21, 2010 7:40 pm
Subject: [OSL |
Tyson,
Sorry, bud. That doesn't cut it. It's completely absurd to think that people
can work on labs that they can't load. Even if I wanted to work a lab
completely from scratch without any base config, I can't configure the PSTN-wan
router. So, its a complete waste of time. You need to
to be. Please say it isn't
so.
Brian
- Reply message -
From: Tyson Scott tsc...@ipexpert.com
Date: Sun, Aug 29, 2010 8:23 pm
Subject: [OSL | CCIE_Voice] [OSL | CCIE_RS] Proctorlabs not resolving
To: 'marc abel' marca...@gmail.com, bkvalent...@gmail.com
Cc: 'Jason Maynard' jason.mayn...@rogers.com
There is no way anyone can answer this question without violating the Non
Disclosure Agreement.
- Reply message -
From: Afzal Bhutta azhar.bhu...@gmail.com
Date: Thu, Sep 2, 2010 9:17 am
Subject: [OSL | CCIE_Voice] ccie voice
To: ccie_voice@onlinestudylist.com
Hi all,
Does any body
...@gmail.com bkvalent...@gmail.com
Cc: cciefo...@hotmail.com, Hough, Earl earl.ho...@pcmall.com,
ccie_voice-boun...@onlinestudylist.com, Randall Saborio
ill2...@gmail.com, ccie_voice@onlinestudylist.com
I have tried all the workaround and suggestions, but none of them appear to
be worked or fulfill
Wondering if replication is down between pub and sub. Ccx could be hitting
sub, which maybe doesn't have the phone associated to the rmcm user... just an
idea.
- Reply message -
From: Tanner Ezell tanner.ez...@gmail.com
Date: Wed, Sep 15, 2010 6:02 pm
Subject: [OSL | CCIE_Voice] One
Exactly... use the music files built into uccx.
- Reply message -
From: Stutz, Bernhard st...@pandacom.de
Date: Fri, Sep 24, 2010 6:39 am
Subject: AW: [OSL | CCIE_Voice] UCCX get digit string
To: Tanner Ezell tanner.ez...@gmail.com, bkvalent...@gmail.com
Cc: ccie_voice@onlinestudylist.com
Remove the display name.
- Reply message -
From: Mark Holloway m...@markholloway.com
Date: Fri, Sep 24, 2010 5:53 pm
Subject: [OSL | CCIE_Voice] Unity Connection Greeting
To: osl osl ccie_voice@onlinestudylist.com
Is there an option so instead of the VM greeting being Sorry, Jon Doe is
Heres a hint. Read the qos srnd. Some WAN qos mechanisms are incompatible
with ip rsvp. If I recall, the point of this lab is to teach you this lesson
at the cost of your time and frustration.
- Reply message -
From: Stern, Larry larry.st...@nuvt.com
Date: Sun, Nov 14, 2010 3:54 pm
Did you build the cipc as the cipc device type? You didn't build in cucm as a
7960/1 phone, as you did with ip blue, did you?
Just a thought...
Brian
Sent from my Verizon Wireless Phone
- Reply message -
From: ccieid1ot ccieid...@gmail.com
Date: Tue, Nov 30, 2010 1:24 pm
Subject:
COBRAS can help. www.ciscounitytools.com.
- Reply message -
From: Mark Padilla clane...@hotmail.com
Date: Fri, Dec 10, 2010 1:20 pm
Subject: [OSL | CCIE_Voice] Deleting and Creating VM Box on Unity 5.0
To: ccie_voice@onlinestudylist.com
I was wondering if anyone knew of a way to delete
B8ZS? ESF? All 24 channels? Top down vs. Bottom up? The PSTN gateway at PL is
set to channels 1-3... how about sending config?
Sent from my Verizon Wireless Phone
- Reply message -
From: Cristobal Priego cristobalpri...@gmail.com
Date: Sat, Dec 11, 2010 12:36 pm
Subject: [OSL |
I knew this guy was lying... John Smith from UK with broken English.
Sent from my Verizon Wireless Phone
- Reply message -
From: John Smith john.smith.cc...@gmail.com
Date: Wed, Dec 22, 2010 10:46 am
Subject: [OSL | CCIE_Voice] Introduction
To: ccie_voice@onlinestudylist.com
HI Team,
Is uccx configured for g711? In the uccx config area.
Sent from my Verizon Wireless Phone
- Reply message -
From: Shrini linuxbos...@gmail.com
Date: Sat, Dec 25, 2010 1:46 pm
Subject: [OSL | CCIE_Voice] IPCC trouble
To: 'Mritunjay Kumar' mjs...@gmail.com, ccie_voice@onlinestudylist.com
Sounds like it could be a replication issue. Try disabling the subscriber to
see if it works.
Sent from my Verizon Wireless Phone
- Reply message -
From: Mritunjay Kumar mjs...@gmail.com
Date: Sun, Dec 26, 2010 2:49 am
Subject: [OSL | CCIE_Voice] IPCC trouble
To: bkvalent...@gmail.com
I would believe at least software MTP would be required. The call has to land
on the cucm somehow.
- Reply message -
From: vcciev vcc...@gmail.com
Date: Thu, Dec 30, 2010 9:31 pm
Subject: [OSL | CCIE_Voice] mobility connect - retrieve call at desk phone
To:
You must also set a call forward no coverage (and the associated CSS) on the
dn that forwarded the call to the hunt pilot.
HTH
Sent from my Verizon Wireless Phone
- Reply message -
From: Naoufal Kerboute naou...@mhdinfotech.com
Date: Sun, Jan 2, 2011 4:06 am
Subject: [OSL |
Could be a replication problem. Make sue the ccm cluster is in sync.
Sent from my Verizon Wireless Phone
- Reply message -
From: Joli-coeur Wouter jwou...@gmail.com
Date: Sun, Jan 9, 2011 5:52 pm
Subject: [OSL | CCIE_Voice] Gatekeeper trunk registration (SUB)
To:
Search the Cisco support forms for code yellow. It usually means the calls
are being throttled due to high cpu/memory utilization.
Time for a reboot?
Sent from my Verizon Wireless Phone
- Reply message -
From: Tatiana Oliveira tati_olivei...@yahoo.com
Date: Mon, Feb 14, 2011 11:08 am
You have these connected with a t1 cross over cable, correct?
I believe pinout should be 1to4, 2to5.
Brian
- Reply message -
From: Mark Reed marklr...@gmail.com
Date: Fri, Feb 18, 2011 5:27 pm
Subject: [OSL | CCIE_Voice] Cross Connecting PRIs issue
To: ccie_voice@onlinestudylist.com
Mark, check your cable. It looks like you are taking physical errors... t1s
are slipping.
- Reply message -
From: Mark Reed marklr...@gmail.com
Date: Sat, Feb 19, 2011 8:56 am
Subject: [OSL | CCIE_Voice] Cross Connecting PRIs issue
To: ccie_voice@onlinestudylist.com
If you have a route pattern pointed directly to a trunk, you are not able to
add it to an RG. Vice Versa is also true.
Brian
- Reply message -
From: Jay Woods cisco...@live.com
Date: Sun, Feb 20, 2011 5:54 pm
Subject: [OSL | CCIE_Voice] Gatekeeper to Route Group
To:
Are you using frts or mqc based shaping? I believe I saw this behaviour when
trying to use mqc based shaping.
- Reply message -
From: Ilya Rubinchik ilya.rubinc...@followmars.com
Date: Thu, Feb 24, 2011 12:16 am
Subject: [OSL | CCIE_Voice] RE : BUG ? QoS with MLP LFI
To: Friderich
Do show network on both and paste output.
- Reply message -
From: Vinay Kumar6 vinayjaisw...@in.ibm.com
Date: Thu, Feb 24, 2011 11:34 am
Subject: [OSL | CCIE_Voice] Slips on E1
To: ccie_voice-boun...@onlinestudylist.com, ccie_voice@onlinestudylist.com
Hi,
I have connected two routers
Try just encapsulation frame-relay... the default is Cisco.
Sent from my Verizon Wireless Phone
- Reply message -
From: Michael Luo hout...@gmail.com
Date: Sat, Mar 26, 2011 1:27 pm
Subject: [OSL | CCIE_Voice] encapsulation frame-relay cisco?
To: ccie_voice@onlinestudylist.com
I'm
Possibly a replication issue?... is ccm3 the Pub?
Sent from my Verizon Wireless Phone
- Reply message -
From: Shrini linuxbos...@gmail.com
Date: Tue, Mar 29, 2011 12:44 pm
Subject: [OSL | CCIE_Voice] Hardware conference is stuck in state
TCP_CONN_ERROR
To: Rahul Kapor
I believe uccx does not understand the + symbol.
- Reply message -
From: Naoufal Kerboute naou...@mhdinfotech.com
Date: Sun, Apr 10, 2011 7:21 am
Subject: [OSL | CCIE_Voice] UCCX Script (Redirect call based on the calling
number)
To: ccie_voice@onlinestudylist.com
Your loopback should have a 32 bit mask. Your static route isn't active
because the connected route has a lower administrative distance.
- Reply message -
From: Rogers Ochieng rogersochi...@gmail.com
Date: Mon, Apr 18, 2011 12:31 pm
Subject: [OSL | CCIE_Voice] CUE to use loopback IP
show run all
- Reply message -
From: Erwan Erwan e_er...@yahoo.com
Date: Tue, Apr 19, 2011 12:46 pm
Subject: [OSL | CCIE_Voice] sh run for router
To: ccie_voice@onlinestudylist.com
hi all,
does anyone know what is the sh run ' command to see any hidden config that
not show up in
This is not an uncommon occurance.
- Reply message -
From: George Goglidze gogli...@gmail.com
Date: Thu, May 5, 2011 6:09 am
Subject: [OSL | CCIE_Voice] Cisco has identified multiple vulnerabilities in
Cisco Unified Communications Manager.
To: mihal caro mihalc...@gmail.com
Cc:
You might need to review logs from the rmcm subsystem. I discovered a bug in
5.0 where a database change of skill wouldn't impact rmcm after a nic failure.
You could be running into the same bug. Not sure if it was docs in 7.0. A
reboot or reset of the node was required to reset the rmcm.
7940/60 phones use the router's time. The newer phones obey the timezone
command under telephony service.
HTH
Brian
- Reply message -
From: George Goglidze gogli...@gmail.com
Date: Mon, May 9, 2011 7:36 pm
Subject: [OSL | CCIE_Voice] Problem with Time on CME
To: Abel ...
Is ny -4 the same as timezone 14?
Can't remember.
Is the ntp in synch on the router?
Show ntp status
Show clock
- Reply message -
From: Bill Lake whl...@gmail.com
Date: Mon, May 9, 2011 7:50 pm
Subject: [OSL | CCIE_Voice] Problem with Time on CME
To: Abel ... midga...@gmail.com
Cc:
Emin,
You will not have to guess at what they want you to do. The instructions will
be pretty clear as to what will earn you points. Doing things that aren't
asked for will not help you, unless they are required for you to accomplish the
task that is asked of you.
For example, if a
Make sure vlan 400 is up/up.
If not, that would do it.
Hth
- Reply message -
From: Randall Crumm rrcr...@yahoo.com
Date: Sun, May 29, 2011 5:07 pm
Subject: [OSL | CCIE_Voice] UCME/CUE
To: Online Study ccie_voice@onlinestudylist.com
HI,
I'm having a weird issue. (see snipits below)
I
Your score reports are protected by the NDA agreement. Obviously so are the
test questions. Stop breaking NDA.
- Reply message -
From: Michael Luo hout...@gmail.com
Date: Wed, Jun 8, 2011 12:11 pm
Subject: [OSL | CCIE_Voice] I just got my Fail result
To: Ki Wi kiwi.vo...@gmail.com
Cc:
www.cisco.com/tac
- Reply message -
From: George Goglidze gogli...@gmail.com
Date: Thu, Jun 9, 2011 12:39 pm
Subject: [OSL | CCIE_Voice] OT: MeetingPlace Express
To: CCIE Voice online groupstudy ccie_voice@onlinestudylist.com
Hi all,
Cisco has announced MeetingPlace Express will be in
Looking for $20 each.
- Reply message -
From: adam compton com...@gmail.com
Date: Mon, Jun 20, 2011 3:06 pm
Subject: [OSL | CCIE_Voice] Need vouchers
To: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com
If you have any extra vouchers you need to get rid of let me know.
Maybe your proctor is on summer vacation.
- Reply message -
From: Adil Shaikh adil.sha...@gmail.com
Date: Thu, Jun 23, 2011 6:44 pm
Subject: [OSL | CCIE_Voice] Lab result status
To: Pablo Meneses pmenese...@gmail.com
Cc: ccie voice ccie_voice@onlinestudylist.com
One week no result. This
Disabling password recovery does NOT mean you cannot recover the router. It
means if you recover the router, you will lose the config. Recover the router.
Then put your config back on it. Then change the password to something you
know.
Sent from my Verizon Wireless Phone
- Reply
You are looking for locales.
- Reply message -
From: Ravindra Lakpriya lakpr...@gmail.com
Date: Tue, Jul 12, 2011 7:11 am
Subject: [OSL | CCIE_Voice] Unicode support in CUCM
To: ccie_voice@onlinestudylist.com
Guy first of all my apologies... even though my CCIE lab date is 20 days
away
Or if the port is physically down... like not plugged in.
- Reply message -
From: Shabeeb Mohammed shabeebc...@gmail.com
Date: Sun, Jul 17, 2011 9:19 am
Subject: [OSL | CCIE_Voice] Fwd: MGCP Gateway reg issue (not l2 TEI or l3 bind)
To: Ashraf Ayyash ash.ayy...@gmail.com
Cc:
CUCM does not support fractional PRIs in MGCP officially.
- Reply message -
From: steven moran smoran...@gmail.com
Date: Sun, Jul 17, 2011 8:45 pm
Subject: [OSL | CCIE_Voice] MGCP Gateway reg issue (not l2 TEI or l3 bind)
To: ccie_voice@onlinestudylist.com
Dear all,
thanks for all of
Build a did and use call routing rule for subscriber sign in, as opposed to
attempt sign in.
Srst voicemail points to the DID.
Sent from my Verizon Wireless Phone
- Reply message -
From: Victor Malyuga victor_maly...@yahoo.com
Date: Sat, Jul 30, 2011 3:21 pm
Subject: [OSL |
Can you wipe the phone? Seems to be holding into an old ip address.
- Reply message -
From: CCIEVoiceKP ccievoic...@gmail.com
Date: Sat, Jul 30, 2011 3:29 pm
Subject: [OSL | CCIE_Voice] [CME-DHCP PROBLEM]
To: michael.se...@compucom.com michael.se...@compucom.com
Cc:
Seriously, forget it. Who cares? Move on. Your config was good.
Sent from my Verizon Wireless Phone
- Reply message -
From: Леонид Архипов leoni...@gmail.com
Date: Sat, Jul 30, 2011 7:39 pm
Subject: [OSL | CCIE_Voice] [CME-DHCP PROBLEM]
To: michael.se...@compucom.com
CME doesn't have css/partitions... instead, use COR.
Now, how exactly is this a ccie lab exam study question? There are no FXO
ports on the lab exam.
- Reply message -
From: Shabeeb Mohammed shabeebc...@gmail.com
Date: Sat, Aug 6, 2011 9:40 am
Subject: [OSL | CCIE_Voice] FXO lines !
Do you have a POE power supply in the router?
- Reply message -
From: Bill Lake whl...@gmail.com
Date: Fri, Aug 19, 2011 8:25 pm
Subject: [OSL | CCIE_Voice] 4-port HWIC-ESW - Phone can't power-on
To: Ramcharan Arya ramcharan.a...@gmail.com
Cc: ccie_voice@onlinestudylist.com
what is the
Did you try setting it in Desktop Administrator?
Sent from my Verizon Wireless Phone
- Reply message -
From: Wael Agina waelag...@gmail.com
Date: Sat, Aug 20, 2011 6:20 am
Subject: [OSL | CCIE_Voice] UCCX Agent in ready state after login
To: ccie_voice@onlinestudylist.com
Dears,
Any
Remember. Don't feed the trolls.___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
Congrats
Sent from my Verizon Wireless Phone
- Reply message -
From: Ahmed Ellboudy ahmed_ellbo...@rayacorp.com
Date: Fri, Sep 9, 2011 11:57 am
Subject: [OSL | CCIE_Voice] I Pass CCIE voice finally
To: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com
HI ALL ,
I Pass MY
On the PSTN router, did you do create cnf-files under telephony service?
- Reply message -
From: Voiper datapack...@gmail.com
Date: Thu, Sep 29, 2011 8:41 am
Subject: [OSL | CCIE_Voice] Home lab PSTN phone woes
To: ccie_voice@onlinestudylist.com
Ahoy one and all:
I am a struggling voice
There must be a million ways to do this. Google is your friend. I like Infra
Recorder, mainly because it is light and open source.
http://infrarecorder.org
- Reply message -
From: michael.se...@compucom.com
Date: Tue, Nov 1, 2011 6:37 pm
Subject: [OSL | CCIE_Voice] [How to make an ISO
See if this helps.
http://www.onlinestudylist.com/archives/ccie_voice/2009-February/057713.html
Brian
- Reply message -
From: Duncan Hamilton-Walker dun...@rosethorn.plus.com
Date: Sat, Nov 5, 2011 7:21 pm
Subject: [OSL | CCIE_Voice] CUCM and UCCX - JTAPI issue
To: 'Bill Lake'
They need to apply QoS, especially on the WAN. There is no other solution --
only several options of bandages. What you need is to stop the bleeding. I
doubt very highly that Cisco would support the configuration without QoS in
place.
2mbps sounds like it could be an Ethernet handoff? If
Trolls. Don't feed them and maybe they will go away.
- Reply message -
From: datucha123 datucha123 datucha...@gmail.com
Date: Tue, Nov 22, 2011 1:38 pm
Subject: [OSL | CCIE_Voice] lab - 6
To: Ashraf Ayyash ash.ayy...@gmail.com
Cc: ccie_voice@onlinestudylist.com
I wonder if you sent it back through the Lo0 interface if it would work.
- Reply message -
From: Mohd Baqari baqari.voic...@gmail.com
Date: Sat, Dec 17, 2011 6:16 pm
Subject: [OSL | CCIE_Voice] RFC2833 with MTP
To: datucha123 datucha123 datucha...@gmail.com
Cc:
You are correct. The route list translations will be used whereever the route
list is used.
You can assign translations to ANI using a Translation profile. Translation
profiles match on called number, but allow manipulations to called or calling
numbers.
So your user's css points to the TP.
Did you enable cube?
Sent from my Verizon Wireless Phone
- Reply message -
From: John McGaughey (jomcgaug) jomcg...@cisco.com
Date: Tue, Dec 27, 2011 7:27 pm
Subject: [OSL | CCIE_Voice] Calls to CUE fail over WAN
To: ccie_voice@onlinestudylist.com
Hello,
I'm in Workbook 2, Lab 8,
88 matches
Mail list logo