[OSL | CCIE_Voice] Voice translation-rule 97
Can some one help explain the rule below. Voice translation-rule 97 Rule 1 /^.*\(3hellip;$\)/ /\1/ exit Voice translation-profile TELCO Translate called 97 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] voice translation-rule 1
HI, i need some to help me explain the rule below on the router. R2(config)#voice translation-rule 1 R2(cfg-translation-rule)#rule 1 /^.*\(3...\)$/ /\1/ R2(config)#voice translation-rule 2 R2(cfg-translation-rule)#rule 1 /^3...$/ /972303/ type any national plan any isdn R2(config)#voice translation-rule 3 R2(cfg-translation-rule)#rule 1 /^3...$/ /303/ type any subscriber plan any isdn R2(cfg-translation-rule)#rule 2 /^2...$/ /408202/ type any national plan any isdn R2(config)#voice translation-rule 4 R2(cfg-translation-rule)#rule 1 /^3...$/ /972303/ type any national plan any isdn R2(cfg-translation-rule)#rule 2 /^2...$/ /408202/ type any national plan any isdn R2(config)#voice translation-rule 5 R2(cfg-translation-rule)#rule 1 /^3...$/ /+1972303/ type any international plan any isdn R2(cfg-translation-rule)#rule 2 /^2...$/ /+1408202/ type any international plan any isdn R2(config)#voice translation-rule 12 R2(cfg-translation-rule)#rule 1 // // type any unknown plan any isdn R2(config)#voice translation-rule 13 R2(cfg-translation-rule)#rule 1 // // type any subscriber plan any isdn R2(config)#voice translation-rule 14 R2(cfg-translation-rule)#rule 1 // // type any national plan any isdn R2(config)#voice translation-rule 15 R2(cfg-translation-rule)#rule 1 // // type any international plan any isdn R2(config)#voice translation-profile in R2(cfg-translation-profile)#translate called 1 R2(config)#voice translation-profile emg R2(cfg-translation-profile)#translate calling 2 R2(cfg-translation-profile)#translate called 12 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] dial-peer
Hi, I need help with explanation of the dial-peer below. R2(config-dial-peer)#destination-pattern 9[2-9].. R2(config-dial-peer)#port 1/0/0:23 R2(config)#dial-peer voice 91 pots R2(config-dial-peer)#translation-profile outgoing nat R2(config-dial-peer)#destination-pattern 91[2-9]..[2-9].. R2(config-dial-peer)#prefix 1 R2(config)#dial-peer voice 9011 pots R2(config-dial-peer)#translation-profile outgoing int R2(config-dial-peer)#destination-pattern 9011T R2(config-dial-peer)#port 1/0/0:23 R2(config-dial-peer)#prefix 011 R2(config)#dial-peer voice 2000 pots R2(config-dial-peer)#translation-profile outgoing nat R2(config-dial-peer)#destination-pattern 2...$ R2(config-dial-peer)#port 1/0/0:23 R2(config-dial-peer)#prefix 14082022 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] dial-peer
Hi, I need help with explanation of the R2(config-dial-peer)#destination-pattern 9[2-9].. R2(config-dial-peer)#port 1/0/0:23 R2(config)#dial-peer voice 91 pots R2(config-dial-peer)#translation-profile outgoing nat R2(config-dial-peer)#destination-pattern 91[2-9]..[2-9].. R2(config-dial-peer)#prefix 1 R2(config)#dial-peer voice 9011 pots R2(config-dial-peer)#translation-profile outgoing int R2(config-dial-peer)#destination-pattern 9011T R2(config-dial-peer)#port 1/0/0:23 R2(config-dial-peer)#prefix 011 R2(config)#dial-peer voice 2000 pots R2(config-dial-peer)#translation-profile outgoing nat R2(config-dial-peer)#destination-pattern 2...$ R2(config-dial-peer)#port 1/0/0:23 R2(config-dial-peer)#prefix 14082022 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Route Patterns
Hi,Can someone explain the Route Patterns below.9.1(2-9)XX[2-9]XX9011.!9011.!#9.1(2-9)XX[2-9]XXCheers ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] voice translation-rule 1
Hi,I need someone to help me explain the translation-rule below.This having issues with thisvoice translation-rule 1rule 1 /0803902\(3\)$/ /\1/rule 2 /^3/ /0803902/rule 3 /4/ /0803902/rule 4 /5/ /0803902/!voice translation-rule 2rule 1 /0803902\(3\)$/ /\1/rule 2 /^3/ /+234803902/rule 3 /4/ /+234803902/rule 4 /5/ /+234803902/!voice translation-rule 5034rule 1 /5034/ /35034/!voice translation-rule 803902rule 1 /0803902\(3\)$/ /\1/rule 2 /\(\)$/ /3\1/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] dial-peer voice 3000 voip
Hi,I need some one to breakdown the commands below. dial-peer voice 3000 voip Destination-pattern 3...$Preference 1session target ipv4: 142.5.64.12voice-class h323 1voice-class codec 1dtmf-relay h245-alphanumericincoming called-number .ip qos dscp cs3 signalingno vaddial-peer voice 3001 voippreference 2Destination-pattern 3...$session target ipv4: 142.5.64.11voice-class h323 1voice-class codec 1dtmf-relay h245-alphanumericincoming called-number .ip qos dscp cs3 signalingno vad ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Voice translation-rule 97
Hi,Can some one break down this for me.Voice translation-rule 97 Rule 1 /^.*\(3…$\)/ /\1/exitVoice translation-profile TELCOTranslate called 97Apply this Translation –profile on voice portvoice-port 0/0/0:23Translation-profile incoming TELCO ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] TEI_ASSIGNED
I need help to reslove the problem with TEI_ASSIGNED on the T1 Link ISDN Serial0/0/0:23 interface dsl 0, interface ISDN Switchtype = primary-ni L2 Protocol = Q.921 0x L3 Protocol(s) = CCM MANAGER 0x0003 Layer 1 Status: ACTIVE Layer 2 Status: TEI = 0, Ces = 1, SAPI = 0, State = TEI_ASSIGNED Layer 3 Status: 0 Active Layer 3 Call(s) Active dsl 0 CCBs = 0 The Free Channel Mask: 0x8007 Number of L2 Discards = 0, L2 Session ID = 0 Total Allocated ISDN CCBs = 0CorpHQ# CorpHQ#show runBuilding configuration...Current configuration : 3755 bytes!! Last configuration change at 23:30:37 PDT Fri Oct 4 2013! NVRAM config last updated at 23:30:39 PDT Fri Oct 4 2013!version 12.4no service padno service timestamps debug uptimeno service timestamps log uptimeno service password-encryption!hostname CorpHQ!boot-start-markerboot-end-marker!logging message-counter syslogenable secret 5 $1$QYKS$Z.r9xOUE1ga6IkB6fi3QU0!no aaa new-modelclock timezone PST -8clock summer-time PDT recurringnetwork-clock-participate wic 0 network-clock-select 1 T1 0/0/0!dot11 syslogip source-route!!ip cef!!no ip domain lookupip multicast-routing no ipv6 cef!multilink bundle-name authenticatedisdn switch-type primary-ni!!!voice service voip sip bind control source-interface Loopback0 bind media source-interface Loopback0voice-card 0!!! !!archivelog config hidekeys! controller T1 0/0/0cablelength short 133pri-group timeslots 1-3,24 service mgcpdescription == Voice Circuit to PSTN!controller T1 0/0/1cablelength short 133channel-group 0 timeslots 1-24description == Data Circuit to WAN!ip tcp synwait-time 5!! !!interface Loopback0ip address 177.1.254.1 255.255.255.255!interface FastEthernet0/0description == To SW1no ip addressduplex autospeed auto!interface FastEthernet0/0.10description == Server VLANencapsulation dot1Q 10ip address 177.1.10.1 255.255.255.0ip pim dense-modeip tcp adjust-mss 1300!interface FastEthernet0/0.11description == Voice VLANencapsulation dot1Q 11ip address 177.1.11.1 255.255.255.0ip pim dense-modeip tcp adjust-mss 1300!interface FastEthernet0/0.12description == Data VLANencapsulation dot1Q 12ip address 177.1.12.1 255.255.255.0ip tcp adjust-mss 1300!interface FastEthernet0/0.13description == PSTN PHONE VLANencapsulation dot1Q 13ip address 177.1.13.1 255.255.255.0ip tcp adjust-mss 1300!interface FastEthernet0/1description === To PSTNip address 177.1.19.254 255.255.255.0duplex autospeed auto!interface Serial0/0/0:23no ip addressencapsulation hdlcisdn switch-type primary-niisdn incoming-voice voiceisdn bind-l3 ccm-managerno cdp enable!interface Serial0/0/1:0description == Frame-Relay Circuit to WANno ip addressencapsulation frame-relaycdp enableno frame-relay inverse-arpframe-relay lmi-type ansi!interface Serial0/0/1:0.1 point-to-pointdescription == FR To BR1ip address 177.0.101.1 255.255.255.0ip pim dense-modesnmp trap link-statusframe-relay interface-dlci 101 !interface Serial0/0/1:0.2 point-to-pointdescription == FR To BR2ip address 177.0.201.1 255.255.255.0ip pim dense-modesnmp trap link-statusframe-relay interface-dlci 201 !router ospf 1log-adjacency-changesnetwork 0.0.0.0 255.255.255.255 area 0!ip forward-protocol ndip http serverno ip http secure-server!!!cdp timer 6!!!control-plane!!!voice-port 0/0/0:23!ccm-manager redundant-host 177.1.10.10ccm-manager mgcp codec-allccm-manager fax protocol ciscoccm-manager music-on-hold!mgcpmgcp call-agent 177.1.10.20 service-type mgcp version 0.1mgcp dtmf-relay voip codec all mode out-of-bandmgcp fax t38 ecmmgcp bind control source-interface Loopback0mgcp bind media source-interface Loopback0!mgcp profile default! !gatekeepershutdown!!line con 0exec-timeout 0 0privilege level 15logging synchronous level 0 limit 20line aux 0line vty 0 4exec-timeout 0 0privilege level 15password ciscologging synchronousno loginline vty 5 15exec-timeout 0 0privilege level 15logging synchronousno login!scheduler allocate 2 1000ntp source Loopback0ntp master 13ntp server 177.1.254.254endCorpHQ#show isdn stGlobal ISDN Switchtype = primary-ni%Q.931 is backhauled to CCM MANAGER 0x0003 on DSL 0. Layer 3 output may not applyISDN Serial0/0/0:23 interface dsl 0, interface ISDN Switchtype = primary-ni L2 Protocol = Q.921 0x L3 Protocol(s) = CCM MANAGER 0x0003 Layer 1 Status: ACTIVE Layer 2 Status: TEI = 0, Ces = 1, SAPI = 0, State = TEI_ASSIGNED Layer 3 Status: 0 Active Layer 3 Call(s) Active dsl 0 CCBs = 0 The Free Channel Mask: 0x8007 Number of L2 Discards = 0, L2 Session ID = 0 Total Allocated ISDN CCBs = 0CorpHQ# ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] TEI_ASSIGNED
CorpHQ#CorpHQ#ISDN Se0/0/0:23 Q921: User RX - SABMEp sapi=0 tei=0ISDN Se0/0/0:23 Q921: S4_SABME: BACKHAULED vsc_wants_L2_up = FALSEISDN Se0/0/0:23 Q921: User RX - SABMEp sapi=0 tei=0ISDN Se0/0/0:23 Q921: S4_SABME: BACKHAULED vsc_wants_L2_up = FALSECorpHQ#CorpHQ#ISDN Se0/0/0:23 Q921: User RX - SABMEp sapi=0 tei=0ISDN Se0/0/0:23 Q921: S4_SABME: BACKHAULED vsc_wants_L2_up = FALSECorpHQ#CorpHQ#ISDN Se0/0/0:23 Q921: User RX - SABMEp sapi=0 tei=0ISDN Se0/0/0:23 Q921: S4_SABME: BACKHAULED vsc_wants_L2_up = FALSECorpHQ#CorpHQ#ISDN Se0/0/0:23 Q921: User RX - SABMEp sapi=0 tei=0ISDN Se0/0/0:23 Q921: S4_SABME: BACKHAULED vsc_wants_L2_up = FALSECorpHQ#CorpHQ#ISDN Se0/0/0:23 Q921: User RX - SABMEp sapi=0 tei=0ISDN Se0/0/0:23 Q921: S4_SABME: BACKHAULED vsc_wants_L2_up = FALSECorpHQ#CorpHQ# I need help to reslove the problem with TEI_ASSIGNED on the T1 Link ISDN Serial0/0/0:23 interface dsl 0, interface ISDN Switchtype = primary-ni L2 Protocol = Q.921 0x L3 Protocol(s) = CCM MANAGER 0x0003 Layer 1 Status: ACTIVE Layer 2 Status: TEI = 0, Ces = 1, SAPI = 0, State = TEI_ASSIGNED Layer 3 Status: 0 Active Layer 3 Call(s) Active dsl 0 CCBs = 0 The Free Channel Mask: 0x8007 Number of L2 Discards = 0, L2 Session ID = 0 Total Allocated ISDN CCBs = 0CorpHQ# CorpHQ#show runBuilding configuration...Current configuration : 3755 bytes!! Last configuration change at 23:30:37 PDT Fri Oct 4 2013! NVRAM config last updated at 23:30:39 PDT Fri Oct 4 2013!version 12.4no service padno service timestamps debug uptimeno service timestamps log uptimeno service password-encryption!hostname CorpHQ!boot-start-markerboot-end-marker!logging message-counter syslogenable secret 5 $1$QYKS$Z.r9xOUE1ga6IkB6fi3QU0!no aaa new-modelclock timezone PST -8clock summer-time PDT recurringnetwork-clock-participate wic 0 network-clock-select 1 T1 0/0/0!dot11 syslogip source-route!!ip cef!!no ip domain lookupip multicast-routing no ipv6 cef!multilink bundle-name authenticatedisdn switch-type primary-ni!!!voice service voip sip bind control source-interface Loopback0 bind media source-interface Loopback0voice-card 0!!! !!archivelog config hidekeys! controller T1 0/0/0cablelength short 133pri-group timeslots 1-3,24 service mgcpdescription == Voice Circuit to PSTN!controller T1 0/0/1cablelength short 133channel-group 0 timeslots 1-24description == Data Circuit to WAN!ip tcp synwait-time 5!! !!interface Loopback0ip address 177.1.254.1 255.255.255.255!interface FastEthernet0/0description == To SW1no ip addressduplex autospeed auto!interface FastEthernet0/0.10description == Server VLANencapsulation dot1Q 10ip address 177.1.10.1 255.255.255.0ip pim dense-modeip tcp adjust-mss 1300!interface FastEthernet0/0.11description == Voice VLANencapsulation dot1Q 11ip address 177.1.11.1 255.255.255.0ip pim dense-modeip tcp adjust-mss 1300!interface FastEthernet0/0.12description == Data VLANencapsulation dot1Q 12ip address 177.1.12.1 255.255.255.0ip tcp adjust-mss 1300!interface FastEthernet0/0.13description == PSTN PHONE VLANencapsulation dot1Q 13ip address 177.1.13.1 255.255.255.0ip tcp adjust-mss 1300!interface FastEthernet0/1description === To PSTNip address 177.1.19.254 255.255.255.0duplex autospeed auto!interface Serial0/0/0:23no ip addressencapsulation hdlcisdn switch-type primary-niisdn incoming-voice voiceisdn bind-l3 ccm-managerno cdp enable!interface Serial0/0/1:0description == Frame-Relay Circuit to WANno ip addressencapsulation frame-relaycdp enableno frame-relay inverse-arpframe-relay lmi-type ansi!interface Serial0/0/1:0.1 point-to-pointdescription == FR To BR1ip address 177.0.101.1 255.255.255.0ip pim dense-modesnmp trap link-statusframe-relay interface-dlci 101 !interface Serial0/0/1:0.2 point-to-pointdescription == FR To BR2ip address 177.0.201.1 255.255.255.0ip pim dense-modesnmp trap link-statusframe-relay interface-dlci 201 !router ospf 1log-adjacency-changesnetwork 0.0.0.0 255.255.255.255 area 0!ip forward-protocol ndip http serverno ip http secure-server!!!cdp timer 6!!!control-plane!!!voice-port 0/0/0:23!ccm-manager redundant-host 177.1.10.10ccm-manager mgcp codec-allccm-manager fax protocol ciscoccm-manager music-on-hold!mgcpmgcp call-agent 177.1.10.20 service-type mgcp version 0.1mgcp dtmf-relay voip codec all mode out-of-bandmgcp fax t38 ecmmgcp bind control source-interface Loopback0mgcp bind media source-interface Loopback0!mgcp profile default! !gatekeepershutdown!!line con 0exec-timeout 0 0privilege level 15logging synchronous level 0 limit 20line aux 0line vty 0 4exec-timeout 0 0privilege level 15password ciscologging synchronousno loginline vty 5 15exec-timeout 0 0privilege level 15logging synchronousno login!scheduler allocate 2 1000ntp source Loopback0ntp master 13ntp server 177.1.254.254endCorpHQ#show isdn stGlobal ISDN Switchtype = primary-ni%Q.931 is backhauled to CCM MANAGER 0x0003 on DSL 0. Layer 3 output may not applyISDN Serial0/0/0:23 interface dsl 0, interface ISDN Switchtype =
[OSL | CCIE_Voice] translation−rule
I need with Translation -rule can someone help me explain the translation rule below.voice translation−rule 1rule 1 /^\(12\)3\(45\)$/ /6\1\2/· Set 1: 12· Set 2: 45· Ignore: 3router#test voice translation−rule 1 12345Matched with rule 1Original number: 12345 Translated number: 61245 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] TEI_ASSIGNED
Hi,I need help I am setting up MGCP on a 2811 router I am getting TE1-ASSIGNED.CorpHQ#debug isdn q921debug isdn q921 is ON.CorpHQ#ISDN Se0/0/0:23 Q921: User RX - SABMEp sapi=0 tei=0ISDN Se0/0/0:23 **ERROR**: L2IF_SendPkt: idb is NULLISDN Se0/0/0:23 **ERROR**: process_rxdata:L2IF_SendPkt FailedCorpHQ#ISDN Se0/0/0:23 Q921: User RX - SABMEp sapi=0 tei=0ISDN Se0/0/0:23 **ERROR**: L2IF_SendPkt: idb is NULLISDN Se0/0/0:23 **ERROR**: process_rxdata:L2IF_SendPkt FailedCorpHQ#ISDN Se0/0/0:23 Q921: User RX - SABMEp sapi=0 tei=0ISDN Se0/0/0:23 **ERROR**: L2IF_SendPkt: idb is NULLISDN Se0/0/0:23 **ERROR**: process_rxdata:L2IF_SendPkt FailedCorpHQ#ISDN Se0/0/0:23 Q921: User RX - SABMEp sapi=0 tei=0ISDN Se0/0/0:23 **ERROR**: L2IF_SendPkt: idb is NULLISDN Se0/0/0:23 **ERROR**: process_rxdata:L2IF_SendPkt FailedCorpHQ#ISDN Se0/0/0:23 Q921: User RX - SABMEp sapi=0 tei=0ISDN Se0/0/0:23 **ERROR**: L2IF_SendPkt: idb is NULLISDN Se0/0/0:23 **ERROR**: process_rxdata:L2IF_SendPkt FailedCorpHQ#ISDN Se0/0/0:23 Q921: User RX - SABMEp sapi=0 tei=0ISDN Se0/0/0:23 **ERROR**: L2IF_SendPkt: idb is NULLISDN Se0/0/0:23 **ERROR**: process_rxdata:L2IF_SendPkt FailedCorpHQ#ISDN Se0/0/0:23 Q921: User RX - SABMEp sapi=0 tei=0ISDN Se0/0/0:23 **ERROR**: L2IF_SendPkt: idb is NULLISDN Se0/0/0:23 **ERROR**: process_rxdata:L2IF_SendPkt FailedCorpHQ#ISDN Se0/0/0:23 Q921: User RX - SABMEp sapi=0 tei=0ISDN Se0/0/0:23 **ERROR**: L2IF_SendPkt: idb is NULLISDN Se0/0/0:23 **ERROR**: process_rxdata:L2IF_SendPkt FailedCorpHQ#ISDN Se0/0/0:23 Q921: User RX - SABMEp sapi=0 tei=0ISDN Se0/0/0:23 **ERROR**: L2IF_SendPkt: idb is NULLISDN Se0/0/0:23 **ERROR**: process_rxdata:L2IF_SendPkt FailedCorpHQ#All possible debugging has been turned offCorpHQ#show isdn staGlobal ISDN Switchtype = primary-niISDN Serial0/0/0:23 interface dsl 0, interface ISDN Switchtype = primary-ni Layer 1 Status: ACTIVE Layer 2 Status: TEI = 0, Ces = 1, SAPI = 0, State = TEI_ASSIGNED Layer 3 Status: 0 Active Layer 3 Call(s) Active dsl 0 CCBs = 0 The Free Channel Mask: 0x8007 Number of L2 Discards = 0, L2 Session ID = 6--More-- ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] TEI_ASSIGNED
Hi,I need help I am setting up MGCP on a 2811 router I am getting TE1-ASSIGNED.CorpHQ#debug isdn q921debug isdn q921 is ON.CorpHQ#ISDN Se0/0/0:23 Q921: User RX - SABMEp sapi=0 tei=0ISDN Se0/0/0:23 **ERROR**: L2IF_SendPkt: idb is NULLISDN Se0/0/0:23 **ERROR**: process_rxdata:L2IF_SendPkt FailedCorpHQ#ISDN Se0/0/0:23 Q921: User RX - SABMEp sapi=0 tei=0ISDN Se0/0/0:23 **ERROR**: L2IF_SendPkt: idb is NULLISDN Se0/0/0:23 **ERROR**: process_rxdata:L2IF_SendPkt FailedCorpHQ#ISDN Se0/0/0:23 Q921: User RX - SABMEp sapi=0 tei=0ISDN Se0/0/0:23 **ERROR**: L2IF_SendPkt: idb is NULLISDN Se0/0/0:23 **ERROR**: process_rxdata:L2IF_SendPkt FailedCorpHQ#ISDN Se0/0/0:23 Q921: User RX - SABMEp sapi=0 tei=0ISDN Se0/0/0:23 **ERROR**: L2IF_SendPkt: idb is NULLISDN Se0/0/0:23 **ERROR**: process_rxdata:L2IF_SendPkt FailedCorpHQ#ISDN Se0/0/0:23 Q921: User RX - SABMEp sapi=0 tei=0ISDN Se0/0/0:23 **ERROR**: L2IF_SendPkt: idb is NULLISDN Se0/0/0:23 **ERROR**: process_rxdata:L2IF_SendPkt FailedCorpHQ#ISDN Se0/0/0:23 Q921: User RX - SABMEp sapi=0 tei=0ISDN Se0/0/0:23 **ERROR**: L2IF_SendPkt: idb is NULLISDN Se0/0/0:23 **ERROR**: process_rxdata:L2IF_SendPkt FailedCorpHQ#ISDN Se0/0/0:23 Q921: User RX - SABMEp sapi=0 tei=0ISDN Se0/0/0:23 **ERROR**: L2IF_SendPkt: idb is NULLISDN Se0/0/0:23 **ERROR**: process_rxdata:L2IF_SendPkt FailedCorpHQ#ISDN Se0/0/0:23 Q921: User RX - SABMEp sapi=0 tei=0ISDN Se0/0/0:23 **ERROR**: L2IF_SendPkt: idb is NULLISDN Se0/0/0:23 **ERROR**: process_rxdata:L2IF_SendPkt FailedCorpHQ#ISDN Se0/0/0:23 Q921: User RX - SABMEp sapi=0 tei=0ISDN Se0/0/0:23 **ERROR**: L2IF_SendPkt: idb is NULLISDN Se0/0/0:23 **ERROR**: process_rxdata:L2IF_SendPkt FailedCorpHQ#All possible debugging has been turned offCorpHQ#show isdn staGlobal ISDN Switchtype = primary-niISDN Serial0/0/0:23 interface dsl 0, interface ISDN Switchtype = primary-ni Layer 1 Status: ACTIVE Layer 2 Status: TEI = 0, Ces = 1, SAPI = 0, State = TEI_ASSIGNED Layer 3 Status: 0 Active Layer 3 Call(s) Active dsl 0 CCBs = 0 The Free Channel Mask: 0x8007 Number of L2 Discards = 0, L2 Session ID = 6--More-- ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] TEI_ASSIGNED
Thanks Original Message Subject: Re: [OSL | CCIE_Voice] TEI_ASSIGNED From: Justin Carney justin.s.car...@gmail.com Date: Tue, October 01, 2013 5:37 pm To: Anthony Nwachukwu anwachu...@apafrica.com Cc: "ccie_voice@onlinestudylist.com (ccie_voice@onlinestudylist.com)" ccie_voice@onlinestudylist.com I'll start by assuming your config is correct. Then, the first thing I try is as follows:no mgcpmgcp bind media source lo0or whatever interface you are using mgcp bind control source lo0 mgcp bind media source lo0mgcp bind control source lo0mgcpThis *usually* clears it up, assuming the configuration is correct. If that doesn't work, take it one step further to reapply the L3 bind commandno mgcpint s0/0/0:23no isdn bind-l3 ccmmgcp bind media source lo0or whatever interface you are using mgcp bind control source lo0 mgcp bind media source lo0mgcp bind control source lo0int s0/0/0:23isdn bind-l3 ccmmgcp This should take care of it. (Note, I haven't had to use this more elaborate method in a while - if there's an error when trying to remove L3 bind from serial interface, you will need to shut the voice-port then the serial interface, run the commands above, then no shut the serial and then finally voice-port, lastly turning on mgcp). A few other notes - I typically use the ccm config method to build mgcp, then issue "no ccm config" after it is built from the CUCM download. I noticed recently in my home lab is that I was applying the command "ccm-manager switchback immediate" BEFORE letting CUCM build the full mgcp config - the issue here is that CUCM does not properly set the switchback method to immediate (even when set in the GUI, on these versions of sw/ios) and it reverts back to graceful switchback (as indicated using "show ccm"). To correct this I now apply this command (and all others extra ccm/mgcp command, such as "ccm music") AFTER config download and "no ccm config." For giggles I reapply the bind commands as well using the first set of commands at the top of this email. The last couple times I did this in practice I have not had any TEI_Assigned and now that this is my routine it takes very little extra time versus doing a minimal config and then troubleshooting mgcp later if needed. When in doubt, reset MGCP from the gui and from cli using no mgcp, mgcp. (The latter is required if you are NOT using ccm config or have removed it. Even when ccm config is left in for a full 23 channel PRI its a good idea to reset mgcp from cli.) Hope this helps...-JustinOn Tue, Oct 1, 2013 at 11:04 AM, Anthony Nwachukwu anwachu...@apafrica.com wrote: Hi,I need help I am setting up MGCP on a 2811 router I am getting TE1-ASSIGNED.CorpHQ#debug isdn q921debug isdn q921 is ON. CorpHQ#ISDN Se0/0/0:23 Q921: User RX - SABMEp sapi=0 tei=0ISDN Se0/0/0:23 **ERROR**: L2IF_SendPkt: idb is NULLISDN Se0/0/0:23 **ERROR**: process_rxdata:L2IF_SendPkt FailedCorpHQ#ISDN Se0/0/0:23 Q921: User RX - SABMEp sapi=0 tei=0 ISDN Se0/0/0:23 **ERROR**: L2IF_SendPkt: idb is NULLISDN Se0/0/0:23 **ERROR**: process_rxdata:L2IF_SendPkt FailedCorpHQ#ISDN Se0/0/0:23 Q921: User RX - SABMEp sapi=0 tei=0ISDN Se0/0/0:23 **ERROR**: L2IF_SendPkt: idb is NULL ISDN Se0/0/0:23 **ERROR**: process_rxdata:L2IF_SendPkt FailedCorpHQ#ISDN Se0/0/0:23 Q921: User RX - SABMEp sapi=0 tei=0ISDN Se0/0/0:23 **ERROR**: L2IF_SendPkt: idb is NULLISDN Se0/0/0:23 **ERROR**: process_rxdata:L2IF_SendPkt Failed CorpHQ#ISDN Se0/0/0:23 Q921: User RX - SABMEp sapi=0 tei=0ISDN Se0/0/0:23 **ERROR**: L2IF_SendPkt: idb is NULLISDN Se0/0/0:23 **ERROR**: process_rxdata:L2IF_SendPkt FailedCorpHQ#ISDN Se0/0/0:23 Q921: User RX - SABMEp sapi=0 tei=0 ISDN Se0/0/0:23 **ERROR**: L2IF_SendPkt: idb is NULLISDN Se0/0/0:23 **ERROR**: process_rxdata:L2IF_SendPkt FailedCorpHQ#ISDN Se0/0/0:23 Q921: User RX - SABMEp sapi=0 tei=0ISDN Se0/0/0:23 **ERROR**: L2IF_SendPkt: idb is NULL ISDN Se0/0/0:23 **ERROR**: process_rxdata:L2IF_SendPkt FailedCorpHQ#ISDN Se0/0/0:23 Q921: User RX - SABMEp sapi=0 tei=0ISDN Se0/0/0:23 **ERROR**: L2IF_SendPkt: idb is NULLISDN Se0/0/0:23 **ERROR**: process_rxdata:L2IF_SendPkt Failed CorpHQ#ISDN Se0/0/0:23 Q921: User RX - SABMEp sapi=0 tei=0ISDN Se0/0/0:23 **ERROR**: L2IF_SendPkt: idb is NULLISDN Se0/0/0:23 **ERROR**: process_rxdata:L2IF_SendPkt FailedCorpHQ# All possible debugging has been turned offCorpHQ#show isdn staGlobal ISDN Switchtype = primary-niISDN Serial0/0/0:23 interface dsl 0, interface ISDN Switchtype = primary-ni Layer 1 Status: ACTIVE Layer 2 Status: TEI = 0, Ces = 1, SAPI = 0, State = TEI_ASSIGNED Layer 3 Status: 0 Active Layer 3 Call(s) Active dsl 0 CCBs = 0 The Free Channel Mask: 0x8007 Number of L2 Discards = 0, L2 Session ID = 6--More--___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] ine racks
I want to you another vendor workbook on ine rack is it possible. Do I have to configure routers from Scratch. Including the frame-relay config.Anthony ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] [FWD: ine racks]
I want to use another vendor workbook on ine rack is it possible. Do I have to configure routers from Scratch. Including the frame-relay config.Anthony ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] I Passed
Hi,I am interested also Original Message Subject: Re: [OSL | CCIE_Voice] I Passed From: Bill Lake whl...@gmail.com Date: Fri, May 27, 2011 9:58 pm To: Fatai Adekunle fatai_adeku...@yahoo.com Cc: ccie_voice@onlinestudylist.com Congratulations, No NDA Stuff but any chance you will share your training routine, strategy or anything else you did to prepare? On Fri, May 27, 2011 at 2:57 PM, Fatai Adekunle fatai_adeku...@yahoo.com wrote: Hot and fresh. I passed my lab yesterday in brussels. Now i will take out time to rest and relax. It was a sressful but worthy journey. Fatai Adekunle CCIE #29052(VOICE)___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com