[OSL | CCIE_Voice] CCIE Collaboration Written -- Single or double CCIE
Hi, Let's say you are a CCIE voice and you passed the CCIE collaboration exam next year, what will happen? - You will become a dual/double CCIE - You will still be a single CCIE but Cisco will rename your CCIE from Voice to Collaboration Are there any official words form Cisco about this? What do you think? Regards, Mohamed Gazzaz ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Unity Connection Restriction Tables setting for External Transfer
Hi Ramcharan, If this pattern is blocked in Unity, then you have to unblock it (from the restriction table). Usually what I do is i always put 9 before the Pstn number and it becomes like this 93942123. This pattern usually is not blocked in unity and by putting 9, it will hit the already configured route pattern in CUCM. Don't forget to assign the correct CSS to the unity ports and configure an external mask for the ports. We need to adhere to the PSTN requirements. Regards, Mohamed Gazzaz Date: Mon, 20 May 2013 11:57:48 -0500 From: ramcharan.a...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Unity Connection Restriction Tables setting for External Transfer Hello, I need clarification regarding when call goes into HQ Phone and press key 1 to transfer call to PSTN Line 1. Since this is external number 2123942123. Since this is external call and Unity connection is using Default system transfer. Do I need to remove block pattern from restriction table. Please let me know your feedback/suggestions. Thanks Regards, Ramcharan Arya ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] How to configure ringlist for a specific phone in CUCM?
Hi Hesham, 1- Configure the subscriber as the first TFTP server in the DHCP pool and then the publisher Configure DHCP option 150 10.10.210.11 10.10.210.10 2- Once the phones obtain the IP addresses and register to the subscriber, go to the specific phone (Let's say phone 1) and click on settings 3- Go to network configuration, and select IPv4 4- Unlock the security, and go to the option 16 Alternate TFTP and change it to YES 5- Go to options 17 and 18 TFTP server 1 and TFTP server 2 and make the publisher TFTP 1 and the sub TFTP 2 Before doing this, you have to upload the modified ringlist.xml to the publisher. Both phones will still register to the subscriber but phone 1 will get the customized ringlist while phone will get the default one. Regards, Mohamed Gazzaz Date: Tue, 7 May 2013 08:58:41 -0700 From: heshamcentr...@gmail.com To: b...@ucguerrilla.com CC: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] How to configure ringlist for a specific phone in CUCM? Hi William, Thanks a lot for your great input. Yes I am aware of the universal ringlist.xml which is located at http://cucmip:6970/ringlist.xml. I know how to change and edit that very well for all the phones. Ok , now for that thing you mentioned below to point to a different TFTP server and then have a different Ringlist.xml do you mean by that for example I make the universal on Publisher and let all phones register to Publisher? and make the other ringlist on the subscriber and let that specific phone register with the subscriber likewise I should configure the first option 150 ip for the phone to subscriber and publisher is the second. I think I can let the UCCX publish the ringlist.xml as it has an IIS as webserver but I don't know how to apply this file on that specific phone on which tab or parameter I am able to do that. In Directories menu , I can create a custom Directories.xml and publish it via UCCX server then I apply the link on the service provisioning enterprise parameters. Then I make service provisioning both inernal and external. Now , the question where is the parameter where can I apply an external link for the ringlist.xml? I am sure that it has something to do with the original phone file configuration which can be tweaked for that. Thanks, Hesham On 7 May 2013 05:18, William Bell b...@ucguerrilla.com wrote: There is a specific config file for each phone, this is true. However, that config file does not contain the ring list. That is a separate config file, as I am sure you are aware. As far as I know the ringlist file is universal. The only way you could specify a custom ringlist for one phone would be to point that phone to a different TFTP server and then have a different Ringlist.xml on that TFTP server (along with all of the other files you would need). -BIll -- William Bell, CCIE #38914 blog: http://ucguerrilla.com twitter: @ucguerrilla On May 7, 2013, at 2:28 AM, Hesham Abdelkereem wrote: Dear Experts, I would like to know how can i edit the ringlist for a specific phone only and not for all? I believe there is a specific configuration file sepxx.cnf is available somewhere in the CUCM but I don't know how to get hold of it. Please share your ideas. Thanks, Hesham___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] MGCP Auto vs Manual configuration
Pick up whatever method you are comfortable with and practice, practice. practice .. Try both methods and see which one is faster for you. Date: Sun, 28 Apr 2013 09:10:30 +0300 From: ccievoic...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] MGCP Auto vs Manual configuration Hi Experts Which method to be use in CCIE Voice lab exam in order to configure MGCP Auto or Manually. Thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Back to back session IPexperts racks
Hello, I am copying the support team. They will clarify this issue for us. Regards,Mohamed Gazzaz From: ahmad_tam...@hotmail.com Date: Wed, 17 Apr 2013 08:45:21 +0300 To: ejzi...@gmail.com CC: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Back to back session IPexperts racks Is there any specific email for the support ? Sent from my iPhone On Apr 16, 2013, at 2:49 PM, Edgar Feliz ejzi...@gmail.com wrote: I've done it many times just ask them to join your sessions, the support team has always been great about doing it when you give them enough time and if racks are available Edgar On Tue, Apr 16, 2013 at 6:58 AM, Bill whl...@gmail.com wrote: You need to verify as in the past this did not always work. Not sure how the new scheduling works Sent from my iPad On Apr 15, 2013, at 10:27 PM, Mohamed Gazzaz mgaz...@hotmail.com wrote: The two sessions are linked automatically when you book B2B sessions and your configuration stays. You can ask support for more clarification. Date: Tue, 16 Apr 2013 04:43:16 +0300 From: aboaz...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Back to back session IPexperts racks Dears,, When I reserve a back to back racks sessions , does the pod number changed? does my configuration removed one I go from one time session to the next one Appreciated ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Back to back session IPexperts racks
Hi Bill, You are correct but that was in the past. Before the new scheduling system, I used to ask support to link my B2B sessions. Now the sessions are automatically linked. I scheduled a B2B session last week and I didn't have to ask support. CC: aboaz...@gmail.com; ccie_voice@onlinestudylist.com From: whl...@gmail.com Subject: Re: [OSL | CCIE_Voice] Back to back session IPexperts racks Date: Tue, 16 Apr 2013 05:58:29 -0500 To: mgaz...@hotmail.com You need to verify as in the past this did not always work. Not sure how the new scheduling works Sent from my iPad On Apr 15, 2013, at 10:27 PM, Mohamed Gazzaz mgaz...@hotmail.com wrote: The two sessions are linked automatically when you book B2B sessions and your configuration stays. You can ask support for more clarification. Date: Tue, 16 Apr 2013 04:43:16 +0300 From: aboaz...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Back to back session IPexperts racks Dears,, When I reserve a back to back racks sessions , does the pod number changed? does my configuration removed one I go from one time session to the next one Appreciated ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] 5-Lab Challenge, Lab 1 PSTN Router Question
Hi Todd, In the lab, we don't have access to the PSTN router so we are not supposed to do anything on the PSTN router (even though we have access on proctorlabs). I faced this issue and I think it is a configuration mismatch between the PSTN router and the DSG. I usually change my configuration on CUCM or the H323 gateway to match what is configured on the PSTN router. Regards, Mohamed Gazzaz From: tcar0...@gmail.com Date: Mon, 15 Apr 2013 17:10:03 -0400 To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] 5-Lab Challenge, Lab 1 PSTN Router Question I'm working on Lab 1 of the 5-lab Self Study Challenge. In Section 4.1, the lab says to use 7-digit DNIS and 10-digit ANI for calls from Site A Site B to the PSTN phone. My lab is configured exactly like the DSG, yet calls are failing from both site A B. I logged onto the PSTN router and I see that calls are successfully reaching the core. That lets me know that CUCM and the Site A B gateways are sending calls properly. Looking at the PSTN router, I see that there are translation-rules that are actually preventing inbound calls from reaching my PSTN phone. Question for the Group: Is it permissible to change the voice translation-rules on the PSTN gateway to solve this problem or is there another solution I should be using? The DSG doesn't say one way or the other. Thanks in advance! --Todd ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Back to back session IPexperts racks
The two sessions are linked automatically when you book B2B sessions and your configuration stays. You can ask support for more clarification. Date: Tue, 16 Apr 2013 04:43:16 +0300 From: aboaz...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Back to back session IPexperts racks Dears,, When I reserve a back to back racks sessions , does the pod number changed? does my configuration removed one I go from one time session to the next one Appreciated ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] MGCP IOS vs GUI settings
Vik told us this in the troubleshooting class. If you are using CCM-manager config, then it won't configure the following - network clock participate and network clock select - no switchback and no dtmf - no bind control and no bind media You have to enter them manually after the MGCP configuration are pushed from CUCM to the gateway and you enter no ccm-manager config Network-clock (participate and select) ccm switchback immediate mgcp dtmf-relay voip codec all mode out mgcp bind control source-interface loop0 mgcp bind media source-interface lopp0 There are other commands like the pri-group timeslot and the backhaul link to CUCM under the signaling interface - if partial pri is required. Date: Tue, 9 Apr 2013 20:19:52 +0545 From: bring...@gmail.com To: midga...@gmail.com CC: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] MGCP IOS vs GUI settings Well, I don't use/haven't used ccm-manager config. I rather configure it manually. So, from this, at least what I will follow is to configure it manually in IOS, and then change them in GUI appropriately to match configured values. Thanks for the views, and other views are most welcome. On Tue, Apr 9, 2013 at 8:17 PM, Abel ... midga...@gmail.com wrote: It fail sometimes, what I do is set it manually after select it in the GUI. Abel Mateo On Tue, Apr 9, 2013 at 9:40 AM, William Bell b...@ucguerrilla.com wrote: Not sure about item i. I always set the switch type in the GUI. For dtmf relay, I always set in IOS because I believe the versions in the lab fail to set the dtmf correctly. It also fails to set ccm-manager switchback correctly. So, I do that in IOS as well. That said, I do set the appropriate values in the GUI because I am not sure how they grade and, well, I am already in the screen dorking around. It would be interesting to here what others do for the ISDN switchtype. I do know that the CCM-Manager Config process will correctly set that information for you. -Bill --William Bellblog: http://ucguerrilla.comtwitter: @ucguerrilla On Apr 9, 2013, at 8:51 AM, Suresh Bhandari wrote: I know that MGCP is a client/server protocol, and even that said I have a very basic (?) question: i. When I have to select the isdn switch-type to primary-ni (NI2) in the IOS before configuring the controller, and ii. if I can select the dtmf relay method to out-of-band for MGCP in IOS itself is it necessary/mandatory, in lab exam point of view, to select the said configs (ISDN Switch Type to NI2 and DTMF Relay Method to OOB) while configuring MGCP in the CUCM? Just a curiosity. Thanks, -- Suresh Bhandari ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- Suresh Bhandari ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] No MWI Light SC calls SA or B thru GK
Hi Hugo, If I remember correctly, This is an issue with IPexpert setup. Since Both SA and SB users are imported to CUC, MWI will work but SC user is not imported to CUC and hence MWI will not work. It sounds weird but to confirm this, delete SA user from CUC and try to leave a VM for SB user. I might be wrong but I read some old emails about this issue from the OSL's archive. Regards,Mohamed Gazzaz From: hugo.barr...@nexusis.com To: ccie_voice@onlinestudylist.com Date: Mon, 8 Apr 2013 05:03:14 + Subject: [OSL | CCIE_Voice] No MWI Light SC calls SA or B thru GK Hi Guy’s, I have been experiencing a weird issue on my last couple of remote lab sessions…When SA and SB call each other and forward to CUC to leave a msg the MWI lights up just fine. However when SC calls site A or B, thru gatekeeper, and forwards to VM to leave a msg NO MWI light. My session ended and I didn’t really get a chance to troubleshoot it, wondering if anyone has seen this before? Hugo ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CME - GK - UCM bandwidth
Hi Suresh, I think you are hitting a known bug . Please go to service parameters -- call manager and change the following to G729 Intraregion Audio Codec Default: G729 Regards,Mohamed Gazzaz Date: Mon, 8 Apr 2013 19:02:14 +0545 From: bring...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] CME - GK - UCM bandwidth Hello Experts! I have HQ as the GK and CME, CUCM publisher and subscriber are registered to GK in single zone. Further, GK Trunk is in separate region/DP with hard-coded G.729 codec with other regions/itself as well. When I call from HQ to CME side, and check sh gatek call it shows that the call is consuming 16K bandwidth, which is expected. The dial-peer to CME has g729r8 as codec (the default one). Even then, the same command displays that the bandwidth consumed is 128K. Any thoughts on what probably I missed? -- Suresh Bhandari ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CME - GK - UCM bandwidth
I don't have a the link to it but I read about it in this OSL. Date: Mon, 8 Apr 2013 19:47:35 +0545 Subject: Re: [OSL | CCIE_Voice] CME - GK - UCM bandwidth From: bring...@gmail.com To: mgaz...@hotmail.com CC: ccie_voice@onlinestudylist.com Will check and let you know. BTW you mentioned a known bug can you please post a link of it? Thanks. On Mon, Apr 8, 2013 at 7:41 PM, Mohamed Gazzaz mgaz...@hotmail.com wrote: Hi Suresh, I think you are hitting a known bug . Please go to service parameters -- call manager and change the following to G729 Intraregion Audio Codec Default: G729 Regards,Mohamed Gazzaz Date: Mon, 8 Apr 2013 19:02:14 +0545 From: bring...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] CME - GK - UCM bandwidth Hello Experts! I have HQ as the GK and CME, CUCM publisher and subscriber are registered to GK in single zone. Further, GK Trunk is in separate region/DP with hard-coded G.729 codec with other regions/itself as well. When I call from HQ to CME side, and check sh gatek call it shows that the call is consuming 16K bandwidth, which is expected. The dial-peer to CME has g729r8 as codec (the default one). Even then, the same command displays that the bandwidth consumed is 128K. Any thoughts on what probably I missed? -- Suresh Bhandari ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- Suresh Bhandari ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] HQ as ntp master Required
Hi Vikky, Ntp server is enough and will do the job for you. Regards,Mohamed Gazzaz Date: Tue, 2 Apr 2013 13:47:32 +0300 From: vikkyne...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] HQ as ntp master Required hi, If hq-router is ntp reference for branches AND hq router has some external ntp reference. should you configure ntp master on HQ router Thanks, Vikky ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CUCM tftp server
Both. If the Sub is down, then the phones will register to the Pub (since it is the second server in the CUCM group) and, for example, will get a list of background images and ringing tones from the publisher. Regards, Mohamed Gazzaz Date: Tue, 2 Apr 2013 21:53:38 +0300 From: vikkyne...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] CUCM tftp server Hi, Like if any file is to be updated on CUCM - TFTP (server) do i need update publisher only,or subscriber only , or both, or does not matter Regards, Vikky ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Codec_calculations_10ms
Hello, I just want to confirm whether my calculations are right or wrong. Scenario: calculate the bandwidth for 4 calls and we are using g.729a with 10 ms and Frame Relay with FRF.12 (8 bytes as per QoS SRND). We have 100 pps and the voice payload size is 10bytes (40+10+8) * 8 * 100 = 46,400 46400 * 4 calls = 185,600 -- 186 kbps Am I right? Regards,Mohamed Gazzaz___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] IP phone 7960
Hi Alex, Just do a search for 7960 and you will see what Presence features are supported. http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/7x/presence.html Also, go through the other parts of the SRND and do the same search to see if other features like Mobility, Call Globalization and localization, and plus dialing are supported or not. Regards, Mohamed Gazzaz From: aa.mend...@icloud.com Date: Mon, 1 Apr 2013 10:20:35 -0600 To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] IP phone 7960 Hello partners Can I do the training lab with this model 7960 ? I have doubts about the presence tasks Thanks in advanced AA ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] IP phone 7960
Here is another link http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/7_0_1/ccmfeat/fscallpn.html I think you should get a better phone model since 7960s do not support some major features of the current blueprint. From: mgaz...@hotmail.com To: aa.mend...@icloud.com; ccie_voice@onlinestudylist.com Date: Mon, 1 Apr 2013 21:24:13 +0300 Subject: Re: [OSL | CCIE_Voice] IP phone 7960 Hi Alex, Just do a search for 7960 and you will see what Presence features are supported. http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/7x/presence.html Also, go through the other parts of the SRND and do the same search to see if other features like Mobility, Call Globalization and localization, and plus dialing are supported or not. Regards, Mohamed Gazzaz From: aa.mend...@icloud.com Date: Mon, 1 Apr 2013 10:20:35 -0600 To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] IP phone 7960 Hello partners Can I do the training lab with this model 7960 ? I have doubts about the presence tasks Thanks in advanced AA ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] RSVP MTP Codec passthru
Passthru is not needed but it will override whatever codec configured in the MTP profile. Let's say for example, you have 2 regions for branch1 and HQ and g729 is used between the 2 regions. If you type codec g711ulaw and codec passthru in the MTP profile, then g711 will not be used. Here are some test results (codec configured between 2 regions + codec passthru in the mtp profile + manual codec configured in the mtp profile) -- Region g729 + passthru + codec g711 = worked (signaling 40K , actual connection 24K) Region g729 + codec g711 = failed (not enough bandwidth) Region g729 + codec g729 = worked (signaling 40K actual connection 24K) Region g729 + passthru = worked (signaling 40K actual connection 24K) Region g711 + codec g729 = worked (signaling 96K actual connection 24K) Region g711 + passthru + codec g729 = worked (signaling 96K actual connection 80K) Region g711 + codec g711 = worked (signaling 96K actual connection 80K) Region g711 + passthru = worked (signaling 96K actual connection 80K) Does it make sense to you ? From: pixarperf...@live.com To: ccie_voice@onlinestudylist.com Date: Sat, 23 Feb 2013 22:42:15 -0600 Subject: [OSL | CCIE_Voice] RSVP MTP Codec passthru hello experts, reading thru sample RSVP configs on the OSL forum i see the wide of use codec passthru under software mtp configuration for rsvp , any reason why codec passthru needed on the mtp. i have it working always without this command. or is this again one of those configuration pieces that needs to be there but no real reason :) many thanks. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CME phones - Privacy button
I have not tried it with a soft phone but with a hardware phone, The behavior is idential to the behavior of enabling the privacy button on CUCM. The other phone won't see the number called using the shared line of the first phone if the privacy button is selected. From: hugo.barr...@nexusis.com To: ccie_voice@onlinestudylist.com Date: Sun, 24 Feb 2013 18:30:42 + Subject: [OSL | CCIE_Voice] CME phones - Privacy button Hi, When I enable the privacy button on a CME registered phone and it has a shard line with another CME phone what should the expected behavior be regarding the button? Not sure if using the soft phones is preventing anything from not working as expected. - Hugo ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] RSVP MTP Codec passthru
No, I never mentioned any workbooks in my email. These are the results of my RSVP tests on proctorlabs racks. I am only using IPexpert materials. Date: Mon, 25 Feb 2013 01:44:36 +0530 Subject: Re: [OSL | CCIE_Voice] RSVP MTP Codec passthru From: paulsch...@gmail.com To: mgaz...@hotmail.com CC: pixarperf...@live.com; ccie_voice@onlinestudylist.com Are you referring at below workbooks http://www.certknowledge.com/ipb/topic/24-ccievoicelabscom-real-labs/ tkx On Mon, Feb 25, 2013 at 12:42 AM, Mohamed Gazzaz mgaz...@hotmail.com wrote: Passthru is not needed but it will override whatever codec configured in the MTP profile. Let's say for example, you have 2 regions for branch1 and HQ and g729 is used between the 2 regions. If you type codec g711ulaw and codec passthru in the MTP profile, then g711 will not be used. Here are some test results (codec configured between 2 regions + codec passthru in the mtp profile + manual codec configured in the mtp profile) -- Region g729 + passthru + codec g711 = worked (signaling 40K , actual connection 24K) Region g729 + codec g711 = failed (not enough bandwidth) Region g729 + codec g729 = worked (signaling 40K actual connection 24K) Region g729 + passthru = worked (signaling 40K actual connection 24K) Region g711 + codec g729 = worked (signaling 96K actual connection 24K) Region g711 + passthru + codec g729 = worked (signaling 96K actual connection 80K) Region g711 + codec g711 = worked (signaling 96K actual connection 80K) Region g711 + passthru = worked (signaling 96K actual connection 80K) Does it make sense to you ? From: pixarperf...@live.com To: ccie_voice@onlinestudylist.com Date: Sat, 23 Feb 2013 22:42:15 -0600 Subject: [OSL | CCIE_Voice] RSVP MTP Codec passthru hello experts, reading thru sample RSVP configs on the OSL forum i see the wide of use codec passthru under software mtp configuration for rsvp , any reason why codec passthru needed on the mtp. i have it working always without this command. or is this again one of those configuration pieces that needs to be there but no real reason :) many thanks. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Cdp adve and cdp run
I never faced any problems on proctor labs wen I enabled CDP Advertise and CDP run. From: ch.christ...@logicom.net To: ccie_voice@onlinestudylist.com Date: Tue, 15 Jan 2013 11:02:04 + Subject: Re: [OSL | CCIE_Voice] Cdp adve and cdp run I mean in the proctor labs devices From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Chrysostomos Christofi Sent: Τρίτη, 15 Ιανουαρίου 2013 12:49 μμ To: Online Study (ccie_voice@onlinestudylist.com) Subject: [OSL | CCIE_Voice] Cdp adve and cdp run Hi I am wondering if we enable cdp adve and cdp run in all the devices if we affect anything about communication and frame relay interfaces is that possible? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Cdp adve and cdp run
I never practiced any labs from volume 2. I am only using the labs from the OWLE workbook and the new self-challenging 5 labs. From: ch.christ...@logicom.net To: mgaz...@hotmail.com; ccie_voice@onlinestudylist.com Subject: RE: [OSL | CCIE_Voice] Cdp adve and cdp run Date: Tue, 15 Jan 2013 11:14:08 + because I faced many times in volume two lab3/4 the communication between the devices through frame relay went down without to configure any qos on it or anything else From: Mohamed Gazzaz [mailto:mgaz...@hotmail.com] Sent: Τρίτη, 15 Ιανουαρίου 2013 1:12 μμ To: Chrysostomos Christofi; ccie_voice@onlinestudylist.com Subject: RE: [OSL | CCIE_Voice] Cdp adve and cdp run I never faced any problems on proctor labs wen I enabled CDP Advertise and CDP run. From: ch.christ...@logicom.net To: ccie_voice@onlinestudylist.com Date: Tue, 15 Jan 2013 11:02:04 + Subject: Re: [OSL | CCIE_Voice] Cdp adve and cdp run I mean in the proctor labs devices From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Chrysostomos Christofi Sent: Τρίτη, 15 Ιανουαρίου 2013 12:49 μμ To: Online Study (ccie_voice@onlinestudylist.com) Subject: [OSL | CCIE_Voice] Cdp adve and cdp run Hi I am wondering if we enable cdp adve and cdp run in all the devices if we affect anything about communication and frame relay interfaces is that possible? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Two Important Questions
Hi Hugo, 1- They are many similarities between them but I believe lab 4 of the OWLE equals the real lab in terms of length. I didn't pass my first attempt 3 weeks ago because I didn't have enough time to finish the lab. During my studies, I was able to finish most of the IPexpert labs from both workbooks in less than 8 hours but I never manged to finish lab 4 of the OWLE workbook in 8 hours. 2- If you skip Qos, I believe you will still pass. Let say you got 2 Qos questions and they worth 8 points, then you will have 92 points left and you only need 80 points to pass the exam. From: hugo.barr...@nexusis.com To: ccie_voice@onlinestudylist.com Date: Mon, 31 Dec 2012 18:30:57 + Subject: [OSL | CCIE_Voice] Two Important Questions Hi, Two questions: 1. Is there a difference between the OWL Labs and the 5-lab Workbook? 2. If a candidate during the exam doesn’t go for the QoS section do you think he/she will still pass? Or is Cisco specifically looking for certain sections of the test to be executed? Your thoughts would be appreciated. - Hugo ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] MGCP gateway : DDI for International Route Pattern options
The second option will work with both route patterns. I tested it several times and it always worked for me. Regards, Mohamed Gazzaz Date: Sat, 22 Dec 2012 11:52:28 -0600 From: ramcharan.a...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] MGCP gateway : DDI for International Route Pattern options Hello, I have a requirement to use SLRG for International destination: First gateway : Site B ( H.323) Second gateway : Site A (MGCP) My route patterns are below: RP : 9011.! pt: pt-sa-int RP : 9011.i# pt: pt-sa-int Option : 1 RL: SLRG DDI: NANP: Predot Option : 2 RL: SLRG DDI: NANP: Predot trailing # Can you suggest which DDI is correct correct for the above route pattern. Thanks Regards, Ramcharan Arya CCIE # 28926 (RS) ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] ProctorLab Phones 7960/7962
Sometimes the phones are connected to different ports. Try to un-shut the other ports and see if they show up. Regards, Mohamed Gazzaz Date: Fri, 21 Dec 2012 14:18:34 + From: sp1...@yahoo.co.uk To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] ProctorLab Phones 7960/7962 Q. Do all the PL voice racks actually have 7962 phones connected to the sw ports ?. I have been using the racks for some and know about the various 'mis-configs' inserted for troubleshooting - but when you apply the same phone config for 7960 phones ports and these phones appear in sh cdp and the 7962 don't - it makes you wonder if the 7962 phone is actually connected. Normally I have my hardware phones on via a remote vpn link , but on this session i don't and and trying to use pview. How do you do the OWLE Labs using + dialling when you only see 7960 phones on the PL racks ? Unfortunately this is not the first time I have come across missing 7962 and have also heard this mentioned by some attendees on a recent IP expert bootcamp. So what do you do to verify whether the rack has 7962's ? I guess IPEx/PL don't guarentee every rack has 7962 phones as when on a bootcamp they had to tweak the configs [using ILMED ?] to ensure the the candidates actually had the 7962 phones on their PODS they could do the labs. I have emailed the support team to verify but they have not/do not reply. Seems i'm screwed on this session. Any opinions ? .Sanjay ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] srst configurations
1- It depends on the question but usually as a rule of thumb, I always configure the plan/type in SRST 2- I don't have one right now, but there are many examples in Cisco website and IPexpert workbooks Here is one from Cisco http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00807f8b31.shtml Regards, Mohamed Gazzaz Date: Sat, 22 Dec 2012 05:11:41 + To: ccie_voice@onlinestudylist.com From: vir...@rediffmail.com Subject: [OSL | CCIE_Voice] srst configurations hi All, Had a few questions ... 1) is switch type and plan required to be configured in the srst mode for Mgcp and h323 gateways? 2) Does any have have working configurations for callmanger fallback and cme-srst for the branch sites ? if yes can u email me the configs. Thanks Guys, Vir Catch India as it happens with the Rediff News App. To download it for FREE, click here ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] srst configurations
Yes, In MGCP, everything is done on CUCM (route patterns, digits manipulation and stripping) In SRST the gateway switches to H323, so it will use the local dial-peers and translation rules. Regards, Mohamed Gazzaz Date: Sat, 22 Dec 2012 06:14:00 + To: mgaz...@hotmail.com Subject: Re: [OSL | CCIE_Voice] srst configurations From: vir...@rediffmail.com CC: ccie_voice@onlinestudylist.com hi Gazzaz, Thanks for the links. 1) If the digit strip is done on the callmanger then if the topology is... ip phonecucm--h323 gateway--pstn Then are you using seperate set of dial peers for the calls made in normal mode and the ones made in srst mode? Thanks, Vir From: Mohamed Gazzaz mgaz...@hotmail.com Sent: Sat, 22 Dec 2012 11:17:40 To: vir...@rediffmail.com, ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] srst configurations 1- It depends on the question but usually as a rule of thumb, I always configure the plan/type in SRST 2- I don't have one right now, but there are many examples in Cisco website and IPexpert workbooks Here is one from Cisco http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00807f8b31.shtml Regards, Mohamed Gazzaz Date: Sat, 22 Dec 2012 05:11:41 + To: ccie_voice@onlinestudylist.com From: vir...@rediffmail.com Subject: [OSL | CCIE_Voice] srst configurations hi All, Had a few questions ... 1) is switch type and plan required to be configured in the srst mode for Mgcp and h323 gateways? 2) Does any have have working configurations for callmanger fallback and cme-srst for the branch sites ? if yes can u email me the configs. Thanks Guys, Vir Catch India as it happens with the Rediff News App. To download it for FREE, click here ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com Catch India as it happens with the Rediff News App. To download it for FREE, click here ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CUPS- Presence - deskphone mode not active
What are you using to login to the CUPS server ? IP address or name ? If you are using the name, Try to add a host record to the host file in the CUCCX server and then try again. Date: Wed, 19 Dec 2012 05:56:57 + To: ccie_voice@onlinestudylist.com From: vir...@rediffmail.com Subject: [OSL | CCIE_Voice] CUPS- Presence - deskphone mode not active hi Guys, In the client I get the option of deskphone mode in CUPC but when I select it the mode does not get applied. In show server health I see the Desk phone mode says Partially Connected(Primary) - Cannot Connect to Phone. I have checked the cti server / gateway profile and it is fine. What else to check? -Vir Catch India as it happens with the Rediff News App. To download it for FREE, click here ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Lab in Dubai. Response time and slowness?
Thanks guys for the feedback. Actually my friend told me that he spent half an hour answering a question because VNC was very slow. Regards, Mohamed Gazzaz Date: Tue, 27 Nov 2012 11:46:32 +0300 Subject: Re: [OSL | CCIE_Voice] Lab in Dubai. Response time and slowness? From: mrmha...@gmail.com To: nsam...@staff.iinet.net.au CC: mgaz...@hotmail.com; ccie_voice@onlinestudylist.com Good luck Mohamed, I went Dubai two times and i didn't suffer from the slowness you will not feel that delay. for the internet explorer and secureCRT are not the latest version so in both there is no tab feature, for remote desktop you have VNC software to access the other servers. Don't hesitate to ask the proctor about anything you think it's not working properly and try to check the phones are not in upgrading state before start the exam. Good luck and hope to listen good news when you come back On Tue, Nov 27, 2012 at 9:22 AM, Nicholas Samios nsam...@staff.iinet.net.au wrote: I thought all hardware was in SJC? The most noticeable delay (sat lab in SYD) I found was in CUCMA webpages but if you know where and what to configure it doesn’t add much time. Actually gives you a second or two to think about the config From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Mohamed Gazzaz Sent: Tuesday, 27 November 2012 4:23 PM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Lab in Dubai. Response time and slowness? Hello, I am going to Dubai for my first attempt soon but since Dubai is connected to Belgium (We don't have the actual hardware in Dubai), Some people are complaining about slowness and response time. For example, it will take a long time to open a new page or refresh the current one. I have been using proctorlabs and the speed is fast and the response time is good. I am afraid that slowness might affect my time and strategy. Has anyone tried the lab in Dubai? What about the other remote locations? My tips so far to counter this issue: - Use command line as much as you can when configuring CUE - Open multiple tabs in IE (Are they still using the non-tabbed version of IE? what about SecureCRT) Thanks you. Regards, Mohamed Gazzaz ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- Engineer / Mohamed Rabea Unified communication engineer ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Lab in Dubai. Response time and slowness?
Hello, I am going to Dubai for my first attempt soon but since Dubai is connected to Belgium (We don't have the actual hardware in Dubai), Some people are complaining about slowness and response time. For example, it will take a long time to open a new page or refresh the current one. I have been using proctorlabs and the speed is fast and the response time is good. I am afraid that slowness might affect my time and strategy. Has anyone tried the lab in Dubai? What about the other remote locations? My tips so far to counter this issue: - Use command line as much as you can when configuring CUE - Open multiple tabs in IE (Are they still using the non-tabbed version of IE? what about SecureCRT) Thanks you. Regards, Mohamed Gazzaz ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] No Services Configured
Where is this solution ? which lab and question ? I searched for it but could not find it in the 5 labs self study workbook. Date: Sat, 17 Nov 2012 00:28:52 + From: ke...@kevinspicer.co.uk To: pixarperf...@live.com CC: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] No Services Configured The enterprise url parameters apply only to phones using external provisioning. So the IP expert solution is fine. Be aware that some older phone models (e.g.7960) only support external provisioning so you might see different results depending on what hardware you have - but the Cisco lab itself is 7965 phones (this is public published info) On 17 Nov 2012 00:01, Pixar Perfect pixarperf...@live.com wrote: I am working on the question from the lab experience handbook where SA phone 1 needs to see No Services Configured when it hits directory button. IPEXPERT suggests that we delete the Service URL from EP and then setup the SA Phone 1 device configuration page Service parameter to External ? I dont think it is acceptable solution as this could cause other phones to not see any services if they reboot and download new config file which has no directories on any phone !!! My approach as follows1) make a directory.xml file using the IP Phone Services document from cisco.com2) delete the Missed, Placed, Corporate, Placed and Received from the Phones IP Phone Services page 3) Setup the EP for Services to Both Update the URL to http://x.x.x.x/directory.xml where x.x.x.x is UCCX IP4) Upload the directory.xml to the IIS server on the UCCX, restart IIS 5) on SA Phone 1 page, setup the Services to Internal, Reset all phones Comments? Feedback? Experiences? TIA. directory.xml CiscoIPPhoneMenu MenuItemNameMissed Calls/Name URLApplication:Cisco/MissedCalls/URL /MenuItem MenuItemNameCorporateDirectory/Name URLApplication:Cisco/CorporateDirectory/URL /MenuItem MenuItem NameReceived Calls/NameURLApplication:Cisco/ReceivedCalls/URL /MenuItem MenuItemNamePlaced Calls/Name URLApplication:Cisco/PlacedCalls/URL /MenuItem MenuItem NamePersonal Directory/Name URLApplication:Cisco/PersonalDirectory/URL /MenuItem/CiscoIPPhoneMenu ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] No Services Configured
Thanks for the clarification. Can't we achieve the same result by using these steps - Delete the Missed, Placed, Corporate, Placed and Received from the Phones IP Phone Services page - From the below link, restore the 5 services with enterprise subscription -- f (false) http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/7_0_1/cucm-rel_notes-701.html#wp631159 - Use BAT to subscribe the 5 services to the desired phones I tried this and it worked for me. Regards, Mohamed Gazzaz Subject: Re: [OSL | CCIE_Voice] No Services Configured From: w...@netcraftsmen.net Date: Sat, 17 Nov 2012 11:01:46 -0500 CC: ke...@kevinspicer.co.uk; pixarperf...@live.com; ccie_voice@onlinestudylist.com To: mgaz...@hotmail.com The OP was referencing one of the four labs in the One Week Lab Experience (OWLE) workbook. It is a different set of labs than the 5-Day Lab workbook. -Bill --William Bellblog: http://ucguerrilla.comtwitter: @ucguerrilla On Nov 17, 2012, at 5:29 AM, Mohamed Gazzaz wrote:Where is this solution ? which lab and question ? I searched for it but could not find it in the 5 labs self study workbook. Date: Sat, 17 Nov 2012 00:28:52 + From: ke...@kevinspicer.co.uk To: pixarperf...@live.com CC: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] No Services Configured The enterprise url parameters apply only to phones using external provisioning. So the IP expert solution is fine. Be aware that some older phone models (e.g.7960) only support external provisioning so you might see different results depending on what hardware you have - but the Cisco lab itself is 7965 phones (this is public published info) On 17 Nov 2012 00:01, Pixar Perfect pixarperf...@live.com wrote: I am working on the question from the lab experience handbook where SA phone 1 needs to see No Services Configured when it hits directory button. IPEXPERT suggests that we delete the Service URL from EP and then setup the SA Phone 1 device configuration page Service parameter to External ? I dont think it is acceptable solution as this could cause other phones to not see any services if they reboot and download new config file which has no directories on any phone !!! My approach as follows1) make a directory.xml file using the IP Phone Services document from cisco.com2) delete the Missed, Placed, Corporate, Placed and Received from the Phones IP Phone Services page3) Setup the EP for Services to Both Update the URL to http://x.x.x.x/directory.xml where x.x.x.x is UCCX IP4) Upload the directory.xml to the IIS server on the UCCX, restart IIS5) on SA Phone 1 page, setup the Services to Internal, Reset all phones Comments? Feedback? Experiences? TIA. directory.xml CiscoIPPhoneMenu MenuItemNameMissed Calls/Name URLApplication:Cisco/MissedCalls/URL /MenuItem MenuItem NameCorporateDirectory/Name URLApplication:Cisco/CorporateDirectory/URL /MenuItem MenuItem NameReceived Calls/NameURLApplication:Cisco/ReceivedCalls/URL /MenuItem MenuItemNamePlaced Calls/Name URLApplication:Cisco/PlacedCalls/URL /MenuItem MenuItem NamePersonal Directory/Name URLApplication:Cisco/PersonalDirectory/URL /MenuItem/CiscoIPPhoneMenu ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] No Services Configured
The last time I tried this, it didn't put them in the correct order but I know how to fix it Right now, I don't remember the correct order of the services but let's assume the correct order is 1- received 2- missed 3- placed 4- Personal 5- Corporate When you create the phone template and use bat to subscribe the services, start from the bottom to the top (from 5 to 1) The lat time I tried this, I started from 1 to 5 and when I presses the services button, they appeared in the reverse order. I need to try that again to confirm. Date: Sat, 17 Nov 2012 11:46:41 -0600 Subject: Re: [OSL | CCIE_Voice] No Services Configured From: whl...@gmail.com To: mgaz...@hotmail.com CC: w...@netcraftsmen.net; ccie_voice@onlinestudylist.com Did it place them in the correct order on your phone when you press services? I did this manually and they are not in the same order without being enterprise services. On Sat, Nov 17, 2012 at 10:13 AM, Mohamed Gazzaz mgaz...@hotmail.com wrote: Thanks for the clarification. Can't we achieve the same result by using these steps - Delete the Missed, Placed, Corporate, Placed and Received from the Phones IP Phone Services page - From the below link, restore the 5 services with enterprise subscription -- f (false) http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/7_0_1/cucm-rel_notes-701.html#wp631159 - Use BAT to subscribe the 5 services to the desired phones I tried this and it worked for me. Regards, Mohamed Gazzaz Subject: Re: [OSL | CCIE_Voice] No Services Configured From: w...@netcraftsmen.net Date: Sat, 17 Nov 2012 11:01:46 -0500 CC: ke...@kevinspicer.co.uk; pixarperf...@live.com; ccie_voice@onlinestudylist.com To: mgaz...@hotmail.com The OP was referencing one of the four labs in the One Week Lab Experience (OWLE) workbook. It is a different set of labs than the 5-Day Lab workbook. -Bill --William Bellblog: http://ucguerrilla.comtwitter: @ucguerrilla On Nov 17, 2012, at 5:29 AM, Mohamed Gazzaz wrote: Where is this solution ? which lab and question ? I searched for it but could not find it in the 5 labs self study workbook. Date: Sat, 17 Nov 2012 00:28:52 + From: ke...@kevinspicer.co.uk To: pixarperf...@live.com CC: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] No Services Configured The enterprise url parameters apply only to phones using external provisioning. So the IP expert solution is fine. Be aware that some older phone models (e.g.7960) only support external provisioning so you might see different results depending on what hardware you have - but the Cisco lab itself is 7965 phones (this is public published info) On 17 Nov 2012 00:01, Pixar Perfect pixarperf...@live.com wrote: I am working on the question from the lab experience handbook where SA phone 1 needs to see No Services Configured when it hits directory button. IPEXPERT suggests that we delete the Service URL from EP and then setup the SA Phone 1 device configuration page Service parameter to External ? I dont think it is acceptable solution as this could cause other phones to not see any services if they reboot and download new config file which has no directories on any phone !!! My approach as follows1) make a directory.xml file using the IP Phone Services document from cisco.com2) delete the Missed, Placed, Corporate, Placed and Received from the Phones IP Phone Services page 3) Setup the EP for Services to Both Update the URL to http://x.x.x.x/directory.xml where x.x.x.x is UCCX IP4) Upload the directory.xml to the IIS server on the UCCX, restart IIS 5) on SA Phone 1 page, setup the Services to Internal, Reset all phones Comments? Feedback? Experiences? TIA. directory.xml CiscoIPPhoneMenu MenuItemNameMissed Calls/Name URLApplication:Cisco/MissedCalls/URL /MenuItem MenuItemNameCorporateDirectory/Name URLApplication:Cisco/CorporateDirectory/URL /MenuItem MenuItem NameReceived Calls/NameURLApplication:Cisco/ReceivedCalls/URL /MenuItem MenuItemNamePlaced Calls/Name URLApplication:Cisco/PlacedCalls/URL /MenuItem MenuItem NamePersonal Directory/Name URLApplication:Cisco/PersonalDirectory/URL /MenuItem/CiscoIPPhoneMenu ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] No Services Configured
I tried it again but the services are not in the correct order. Sorry for the confusion. From: mgaz...@hotmail.com To: whl...@gmail.com CC: w...@netcraftsmen.net; ccie_voice@onlinestudylist.com Subject: RE: [OSL | CCIE_Voice] No Services Configured Date: Sat, 17 Nov 2012 21:04:54 +0300 The last time I tried this, it didn't put them in the correct order but I know how to fix it Right now, I don't remember the correct order of the services but let's assume the correct order is 1- received 2- missed 3- placed 4- Personal 5- Corporate When you create the phone template and use bat to subscribe the services, start from the bottom to the top (from 5 to 1) The lat time I tried this, I started from 1 to 5 and when I presses the services button, they appeared in the reverse order. I need to try that again to confirm. Date: Sat, 17 Nov 2012 11:46:41 -0600 Subject: Re: [OSL | CCIE_Voice] No Services Configured From: whl...@gmail.com To: mgaz...@hotmail.com CC: w...@netcraftsmen.net; ccie_voice@onlinestudylist.com Did it place them in the correct order on your phone when you press services? I did this manually and they are not in the same order without being enterprise services. On Sat, Nov 17, 2012 at 10:13 AM, Mohamed Gazzaz mgaz...@hotmail.com wrote: Thanks for the clarification. Can't we achieve the same result by using these steps - Delete the Missed, Placed, Corporate, Placed and Received from the Phones IP Phone Services page - From the below link, restore the 5 services with enterprise subscription -- f (false) http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/7_0_1/cucm-rel_notes-701.html#wp631159 - Use BAT to subscribe the 5 services to the desired phones I tried this and it worked for me. Regards, Mohamed Gazzaz Subject: Re: [OSL | CCIE_Voice] No Services Configured From: w...@netcraftsmen.net Date: Sat, 17 Nov 2012 11:01:46 -0500 CC: ke...@kevinspicer.co.uk; pixarperf...@live.com; ccie_voice@onlinestudylist.com To: mgaz...@hotmail.com The OP was referencing one of the four labs in the One Week Lab Experience (OWLE) workbook. It is a different set of labs than the 5-Day Lab workbook. -Bill --William Bellblog: http://ucguerrilla.comtwitter: @ucguerrilla On Nov 17, 2012, at 5:29 AM, Mohamed Gazzaz wrote: Where is this solution ? which lab and question ? I searched for it but could not find it in the 5 labs self study workbook. Date: Sat, 17 Nov 2012 00:28:52 + From: ke...@kevinspicer.co.uk To: pixarperf...@live.com CC: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] No Services Configured The enterprise url parameters apply only to phones using external provisioning. So the IP expert solution is fine. Be aware that some older phone models (e.g.7960) only support external provisioning so you might see different results depending on what hardware you have - but the Cisco lab itself is 7965 phones (this is public published info) On 17 Nov 2012 00:01, Pixar Perfect pixarperf...@live.com wrote: I am working on the question from the lab experience handbook where SA phone 1 needs to see No Services Configured when it hits directory button. IPEXPERT suggests that we delete the Service URL from EP and then setup the SA Phone 1 device configuration page Service parameter to External ? I dont think it is acceptable solution as this could cause other phones to not see any services if they reboot and download new config file which has no directories on any phone !!! My approach as follows1) make a directory.xml file using the IP Phone Services document from cisco.com2) delete the Missed, Placed, Corporate, Placed and Received from the Phones IP Phone Services page 3) Setup the EP for Services to Both Update the URL to http://x.x.x.x/directory.xml where x.x.x.x is UCCX IP4) Upload the directory.xml to the IIS server on the UCCX, restart IIS 5) on SA Phone 1 page, setup the Services to Internal, Reset all phones Comments? Feedback? Experiences? TIA. directory.xml CiscoIPPhoneMenu MenuItemNameMissed Calls/Name URLApplication:Cisco/MissedCalls/URL /MenuItem MenuItemNameCorporateDirectory/Name URLApplication:Cisco/CorporateDirectory/URL /MenuItem MenuItem NameReceived Calls/NameURLApplication:Cisco/ReceivedCalls/URL /MenuItem MenuItemNamePlaced Calls/Name URLApplication:Cisco/PlacedCalls/URL /MenuItem MenuItem NamePersonal Directory/Name URLApplication:Cisco/PersonalDirectory/URL /MenuItem/CiscoIPPhoneMenu ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out
Re: [OSL | CCIE_Voice] UCCX
Bill, I followed the steps in this link to install UCCX on a windows XP Desktop running Vmware. http://uccert.wikidot.com/uccx7 Apply the following to your registry: - KEY - Hkey_local_machine/software/Cisco Systems/Model - String Value - Hardware 7835H04 - String Value - Memory 2048 - String Value - Speed 3400 Regards, Mohamed Gazzaz Date: Mon, 3 Sep 2012 19:41:48 -0500 From: whl...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] UCCX Trying to install UCCX on laptop to practice scripting but while I installed Server 2003 and did the registry update, it says Installation of Cisco Unified Contact Center Express cannot be performed on the current version of MCS OS Service Release. Please upgrade the OS image version to 2003.1.5a or higher and try again Does anyone know how to overcome this issue. I tried the following Bill ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com attachment: image.png___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Written CCIE Study Guide
Hello Rafael, Vik wrote an article on how to prepare for the written exam: http://blog.ipexpert.com/2010/10/25/ccie-voice-written-good-bed-time-reading/ Here is a list of what I used to prepare for the written exam + CCVP books from Cisco + other books from Cisco press Documentation Guide for Cisco Unity Connection Release 7.x http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/roadmap/7xcucdg.html System Administration Guide for Cisco Unity Connection http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/administration/guide/7xcucsagpdf.pdf Enterprise QoS Solution Reference Network Design Guide http://www.cisco.com/en/US/docs/solutions/Enterprise/WAN_and_MAN/QoS_SRND/QoS-SRND-Book.html QoS 3750 switches http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_44_se/configuration/guide/swqos.html Cisco Unified Contact Center Express SRND http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_7_0/design/guide/uccx70srnd.pdf Cisco IOS Fax, Modem, and Text Support over IP Configuration Guide, Release 15.0 http://www.cisco.com/en/US/docs/ios/voice/fax/configuration/guide/15_0/vf_15_0_book.html Quality of Service for Voice http://www.cisco.com/en/US/docs/ios/12_3/vvf_c/cisco_ios_voice_configuration_library_glossary/vclqos.html Cisco IOS Voice, Video, and Fax Configuration Guide, Release 12.2 http://www.cisco.com/en/US/docs/ios/12_2/voice/configuration/guide/fvvfax_c.html Cisco Unified SCCP and SIP SRST System Administrator Guide (All Versions) http://www.cisco.com/en/US/docs/voice_ip_comm/cusrst/admin/sccp_sip_srst/configuration/guide/SCCP_and_SIP_SRST_Admin_Guide.html Cisco Unified Communications SRND Based on Cisco Unified Communications Manager 7.x http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/7x/uc7_0.html Cisco Catalyst 3750 QoS Configuration Examples http://www.cisco.com/en/US/products/hw/switches/ps5023/products_tech_note09186a0080883f9e.shtml Cisco Unified CallManager Express Solution Reference Network Design Guide http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/srnd/design/guide/cmesrnd.html Cisco Unified Communications Manager System Guide, Release 7.0(1) http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/7_0_1/ccmsys/cucm-accm-701.html Cisco Unified Communications Manager Features and Services Guide, Release 7.0(1) http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/7_0_1/ccmfeat/cmfsgd701.html Cisco Unified Communications Manager Administration Guide, Release 7.0(1) http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/7_0_1/ccmcfg/701-cmcfg.html Cisco Unified Communications Manager Express System Administrator Guide http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm.html MGCP http://www.cisco.com/en/US/tech/tk652/tk701/tk419/tsd_technology_support_sub-protocol_home.html H.323 http://www.cisco.com/en/US/tech/tk652/tk701/tk309/tsd_technology_support_sub-protocol_home.html Voice Over IP - Per Call Bandwidth Consumption http://www.cisco.com/en/US/tech/tk652/tk698/technologies_tech_note09186a0080094ae2.shtml Voice Codecs http://www.cisco.com/en/US/docs/ios/solutions_docs/voip_solutions/TA_ISD.html#wp1032829 Regards, Mohamed Gazzaz Date: Fri, 1 Jun 2012 02:22:02 -0300 From: raf...@chavantes.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Written CCIE Study Guide All,Im preparing for the Written CCIE and for now Im watching IPE written vod, beside the videos and SRND what you recommend?Im going to read the Cisco QoS book, anything else?ThanksRafael -- Rafael Chavantes ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] new 5 labs from ipexpert??
Hello, I found 2 products (ebook version) on IPexpert website, What's the difference between them? since both products have 5 labs, which one contains the new released voice labs? CCIE Voice Five-Lab, Self-Study Challenge, Evaluation, and Assessment Handbook for v3.0 Lab Exam ($699) http://www.ipexpert.com/Cisco/CCIE/Voice/Handbook CCIE Voice Lab Preparation eBook ($249) http://www.ipexpert.com/Cisco/CCIE/Voice/Workbook/eBook Regards, Mohamed Gazzaz ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CCIE_Voice Digest, Vol 65, Issue 114
Hello Michael, From this url, http://www.cisco.com/cisco/web/psa/default.html?mode=home Select Products -- Voice and unified communications -- Customer Collaboration -- Cisco Unified Contact Center Products -- Cisco Unified Contact Center Express -- Configuration Examples and TechNotes -- Configure a One Button Login for IP Phone Agents Regards, Mohamed Gazzaz From: michael.se...@compucom.com To: ccie_voice@onlinestudylist.com Date: Fri, 27 Apr 2012 20:10:19 -0400 Subject: Re: [OSL | CCIE_Voice] CCIE_Voice Digest, Vol 65, Issue 114 Greetings all, I'm trying the find the IPPA URL in CUCM help or the ICON that will be on the candidate desktop without any luck. Can anyone provide assistance on how to find this URL when sitting in the lab. Thank you, Michael Sears ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Vouchers Expiration date???
Hello, When I purchased the voice BLS, I got some vouchers. Will they expire if I don't use them? I joined a new company and they want me to study Junos and be a JNCIS-SEC so I have to pause my CCIE Voice studies. Thank you. Regards, Mohamed Gazzaz CCIE Security# 25719 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] passed CCIE 29606
Congratulations and thanks for sharing your experience with us. Nice number by the way. Regards, Mohamed Gazzaz Date: Tue, 19 Jul 2011 08:49:00 -0700 From: cristobalpri...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] passed CCIE 29606 hello guys, My 2 year journey just came to an end. I took my 3rd attempt yesterday in San Jose and i just got my score 5 mins ago with good news I'm CCIE # 29606 It was long hours of study time and lab time I couldn't afford a home lab so all i did is rent equipment from Proctorlabs i was able to get physical phones to test. which was pretty good my strategy was a bit different from what people usually recommend I started with Infrastructure of course switch config all that needed to be done in the switch including QoS, so i could forget about that device then i moved to HQ, SiteB and SiteC NTP, vlans, and then QoS right away after that i started working on CUE (because i know it takes long time) then i moved to PRI configs then i started working on configuring my phones, basic config then i moved over to VM, then UCCX, then all the features requested and at the end i did call routing something that actually helped me out a lot to improve my speed was i created my configs in notepad and i called those my templates, so during the week i didn't have access to any rack rental sessions so i was practicing in notepad i did the workbooks 1 and 2 only once then i was using the rack rental sessions to practice pretty heavily on a tech basis everthing from inside out and every once in a while start adding more technologies that was my experience i didn't know how to approach this beast at the beginning I was reading all the documentation all the pdf's and books and i was getting bored so i dediced to read all the documentation, pdf's and books on a technology basis i printed a calendar and with the blue print on the other hand i marked which days i was going to spend studying X item on the blue print so by the time it was the weekend i could practice that in my lab sessions during the weekend and get as much as i could from the rack rental sessions thank you very much for all your support and also for my study partners from all over the world I'll try to help you to get your number as well, you guys helped me, i'm going to try to do the same have a great day ! ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Passed
Congrats, Where did you go in your 3 attempts? I wanna go there too :) LOL Regards, Mohamed Gazzaz From: gogli...@gmail.com Date: Wed, 29 Jun 2011 14:44:21 +0100 To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Passed Hi all, As the subject suggests, it's official, I'm dual CCIE #19926 RS and Voice starting yesterday. Finally, it's a relief, no more studying late, spending weekends on a computer, making calls, my neighbours think I escaped a psychiatric, after hearing voices at night TEST VOICEMAIL FOR HQ PHONE 1 and my personal favourite YOUR POSITION IN QUEUE IS :) I would like to transmit a very special thank you to IPExpert, and especially Vik Malhi. He's definitely made difference for me as a trainer. Just when you think you know it all about something, he would come up with something to prove me wrong, to show me the gaps in my knowledge I didn't know existed. Thank you Vik! Thanks to everyone on this forum too, there are many good people on the forum, with big knowledge, and more importantly willing to share it. It was big fun, I enjoyed the process a lot. By the way, I made it technically on my first attempt. Well, I payed once only, although I went to exam 3 times. 1st time, technical problems, Cisco gave me free retake voucher, 2nd time, again technical problems, again free voucher. To be honest after so many free retakes, I'm not even sure if I really passed, or I was costing them too much so they decided to give it to me :-), good samaritans these cisco guys. Wish you all good luck, and don't get frustrated, and most importantly have fun. Regards, ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Challenges with Hardware VPN
Hi pithog, I faced the same problems in my first session and to overcome these problems, I stopped using DHCP and configured the IP address, subnet Mask, Gateway, and TFTP manually on all the IP phones. To stop the phones from changing their firmware, go to CUCM Admin page, then select Device -- Phone -- select a phone -- in the phone configuration page, type the firmware name in the Phone Load Name field. For example, my phone uses this firmware SCCP70.9-1-1SR1S In CME, Don't write the load command under telephony-service Regards, Mohamed Gazzaz Date: Sun, 26 Jun 2011 11:33:38 -0700 From: pithog...@yahoo.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Challenges with Hardware VPN Hi Experts, i use the Software VPN in the past but now i use the hardware VPN and am having lots of challenges i have never seen with software VPN , can someone help me out, how do i get my phones to register with the Firmware on them without a firmware upgrade, my PSTN phone keeps registering and unregistering, and some of my phones upgrade firm ware for more tha 3 hours and never get completed. Pls assist i must be missing something, i am on a live IPX rack now. Thanks in anticipation. Regards pithog oil ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] 7965 SIP Phones Keep Resetting
Hi Inder, I have a bunch of 7970 phones and I noticed that some phones will reset when I use DHCP (My 871 router will allocate IPs to the phones). After configuring the Ip address, Subnet Msk, Gateway, and TFTP manually on all the phones, I didn't face this issue (till now). My Sip phones use SIP70.9-0-3S and SIP70.9-1-1SR1S, while my SCCP phones use SCCP70.9-0-3S and SCCP70.9-1-1SR1S. Regards, Mohamed Gazzaz From: ising...@gmail.com To: ccie_voice@onlinestudylist.com Date: Fri, 24 Jun 2011 08:24:22 -0600 Subject: [OSL | CCIE_Voice] 7965 SIP Phones Keep Resetting Hello, I am using the proctor labs gear via an ezvpn connection and my own set of 7965 phones. When registering 7965 phones as SIP devices both the CUCM attached phone and the CUCME attached phone keep resetting. The CUCM attached phone registers and then resets immediately. The CUCME phone registers for about 60 seconds and then resets. Both phones have the following firmware load: SIP45.8-4-1S. Has anyone seen this before? Any suggestions on what it might be that is causing both phones to behave this way? Thanks.Inder. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] interesting post
I have the BLS from Ipexpert but I am seriously considering the Cisco 360 (Voice) since they provide graded assessment labs. Students need some sort of feedback to identify their weak points and work on improving them. At least we will have an idea on how the grading works. Your thoughts? Regards, Mohamed Gazzaz Date: Sun, 19 Jun 2011 11:22:31 -0700 From: cristobalpri...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] interesting post https://supportforums.cisco.com/message/3380695#3380695 what do you think ? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] mixture of own and remote hardware for vRack session
Hi Steffen, Yes, you can do that. Regards, Mohamed Gazzaz Date: Tue, 26 Apr 2011 05:40:25 +0100 From: steffen.bruen...@intact-is.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] mixture of own and remote hardware for vRack session Hi all, I have made two vRack sessions so far based on Remote Phones and Softphones. For my next session I want to use the hardware vpn session. I have a 2811 with 4-Port Hwic and 3 7962 phones, but as written on proctorlabs it seems that this is not enough (requirements are 5 phones and a 8-port switch) . Isn`t it possible/allowed to use a mixture of my own phones and some of the remote phones? RegardsSteffen __ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email __ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] (no subject)
Hello, Ap per Ipexpert's voice topology, I purchased 5 IP Phones which I use to practice. Do I need to get 2 additional IP Phones to practice all the scenarios? For example, Calls from SIP to SIP , from SCCP to SIP, SIP to SCCP, and SCCP to SCCP. I want each location to have 2 IP Phones (SIP and SCCP) and one phone for PSTN. . One last question, Can I skip Volume 1 5A labs and start with 5C labs? or do I have to finish 5A before moving to 5C? Thank you. Regards, Mohamed Gazzaz___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Some questions
Sorry I forgot to add a subject in my last email. From: mgaz...@hotmail.com To: ccie_voice@onlinestudylist.com Subject: Date: Sat, 2 Apr 2011 11:36:49 +0300 Hello, Ap per Ipexpert's voice topology, I purchased 5 IP Phones which I use to practice. Do I need to get 2 additional IP Phones to practice all the scenarios? For example, Calls from SIP to SIP , from SCCP to SIP, SIP to SCCP, and SCCP to SCCP. I want each location to have 2 IP Phones (SIP and SCCP) and one phone for PSTN. . One last question, Can I skip Volume 1 5A labs and start with 5C labs? or do I have to finish 5A before moving to 5C? Thank you. Regards, Mohamed Gazzaz___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Some questions
Thanks in no particular order to Rogers, Bill, CCIE Voice, and Julien for their replies. I will add 2 more phones to my study collection because the auto-answer feature and the soft clients are not enough in my opinion. Regards, Mohamed Gazzaz CCIE Security #25719 Date: Sat, 2 Apr 2011 15:05:41 +0300 Subject: Re: [OSL | CCIE_Voice] Some questions From: rogersochi...@gmail.com To: mgaz...@hotmail.com You can use the phones at proctorlabs at each site, you can have then use SCCP and enable auto answer then use you local phones to do the SIP requirements. If you can afford two more phones the better. When starting off i think doing each volume 1 lab is essential as it builds on previous questions, you can thereafter pick random sections to test and when comfortable move to volume two. That's the approach i've taken. Rogers 2011/4/2 Mohamed Gazzaz mgaz...@hotmail.com Sorry I forgot to add a subject in my last email. From: mgaz...@hotmail.com To: ccie_voice@onlinestudylist.com Subject: Date: Sat, 2 Apr 2011 11:36:49 +0300 Hello, Ap per Ipexpert's voice topology, I purchased 5 IP Phones which I use to practice. Do I need to get 2 additional IP Phones to practice all the scenarios? For example, Calls from SIP to SIP , from SCCP to SIP, SIP to SCCP, and SCCP to SCCP. I want each location to have 2 IP Phones (SIP and SCCP) and one phone for PSTN. . One last question, Can I skip Volume 1 5A labs and start with 5C labs? or do I have to finish 5A before moving to 5C? Thank you. Regards, Mohamed Gazzaz ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Does anybody read my messages?
Yes Date: Thu, 24 Feb 2011 23:52:32 -0600 From: danie...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Does anybody read my messages? Hello all, I'm very sorry if I'm disturbing you but for some reason I feel nobody receives my posts. Does anyone read this? Thanks a lot! Daniel G. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] 7970 IP Phones
Hello, Can We use 7970s instead of 7965,2,1 to prepare for the lab ? I have some at work. Regards, Mohamed Gazzaz ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] RES: 7970 IP Phones
Really !! But they are higher ends than the 7965s. Do you have a link or a document that states this. From: malexand...@uol.com.br To: mgaz...@hotmail.com; ccie_voice@onlinestudylist.com Subject: RES: [OSL | CCIE_Voice] 7970 IP Phones Date: Fri, 18 Feb 2011 22:32:17 -0200 Yes , but in 7970 phones you dont have the globalization... De: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] Em nome de Mohamed Gazzaz Enviada em: sexta-feira, 18 de fevereiro de 2011 20:26 Para: ccie_voice@onlinestudylist.com Assunto: [OSL | CCIE_Voice] 7970 IP Phones Hello, Can We use 7970s instead of 7965,2,1 to prepare for the lab ? I have some at work. Regards, Mohamed GazzazNenhum v?rus encontrado nessa mensagem recebida. Verificado por AVG - www.avgbrasil.com.br Vers?o: 9.0.872 / Banco de dados de v?rus: 271.1.1/3452 - Data de Lançamento: 02/18/11 17:34:00 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] How Do I tie a dial-peer with a specific FXO Port
Thank you for your suggestion but I got it to work with a different way.https://supportforums.cisco.com/message/3215140#3215140 CC: mgaz...@hotmail.com; ccie_voice@onlinestudylist.com From: kiwi.vo...@gmail.com Subject: Re: [OSL | CCIE_Voice] How Do I tie a dial-peer with a specific FXO Port Date: Mon, 1 Nov 2010 14:30:18 +0800 To: linuxbos...@gmail.com I think they need to send a special string in front to select the correct dial peer. I would say mgcp is easier. Sent from my iPhonePls pardon my fat fingers. On Nov 1, 2010, at 12:00 AM, Shrini linuxbos...@gmail.com wrote: Here is the option for it. Fax machine 1-- ATA 1 - assign to a Device Pool (xyz) CUCM -- H323 Gateway -- FXO port 1 create a route group (rg-xyz) Assign this route group to device pool xyz Hope this helps. On 10/31/2010 3:25 AM, Mohamed Gazzaz wrote: Thanks, but this is not what I want. I want for example Fax machine connected to a ATA and has a Directory Number of 4410290. DN= 4410290 analog line connected to the PSTN and has the number of 4410290 Fax machine 1-- ATA 1 --- CUCM -- H323 Gateway -- FXO port 1 -- PSTN DN= 4410277 analog line connected to the PSTN and has the number of 4410277 Fax machine 2 -- ATA 2 --- CUCM -- H323 Gateway -- FXO port 2 -- PSTN Sometimes when Fax1 sends an outgoing fax, it goes out from FXO Port 2 which has the wrong number. How do I make outgoing faxes from Fax 1 always go out from FXO port 1 ? I hope it is clear now. Date: Sun, 31 Oct 2010 01:15:47 -0700 From: linuxbos...@gmail.com To: mgaz...@hotmail.com CC: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] How Do I tie a dial-peer with a specific FXO Port Hi Mohamed, You might have already tried but, POTS dialpeer discard explicitily defined digits. Try using prefix 411 and prefix 441 in respective dial-peers. Thanks Shrini On 10/31/2010 12:55 AM, Mohamed Gazzaz wrote: Hello Voice Experts, Here is the scenario : we have multiple analog lines and each one is connected to a FXO port and we want to tie some fax machines (Connected Via ATAs) to these analog lines. The ATAs are registered with the CUCM and I have configured the gateway as a H323 gateway. Route-patterns are configured on the CUCM and dial-peers are configured also on the gateway. My problem is when a fax machines ( 411xx90) sends an outgoing fax , it goes out from the wrong FXO port as 441xx77. I know this happens because we have multiple outgoing dial-peers with the same destination-pattern but to different FXO ports. How do I fix this ? I tried MGCP and it worked great but I faced this problem where the call counter started to count even when the other phone was on-Hook and ringing. I googled this problem and found this document from Cisco FXO Disconnect Problem. I tried the solutions from Cisco but nothing worked http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00800ae2d1.shtml http://www.cisco.com/en/US/docs/ios/12_2t/12_2t2/feature/guide/ft_ansds.html That's why I am trying with H323. Any suggestions would be appreciated. Regards, Mohamed Gazzaz CCIE Security #25719 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] How Do I tie a dial-peer with a specific FXO Port
Hello Voice Experts, Here is the scenario : we have multiple analog lines and each one is connected to a FXO port and we want to tie some fax machines (Connected Via ATAs) to these analog lines. The ATAs are registered with the CUCM and I have configured the gateway as a H323 gateway. Route-patterns are configured on the CUCM and dial-peers are configured also on the gateway. My problem is when a fax machines ( 411xx90) sends an outgoing fax , it goes out from the wrong FXO port as 441xx77. I know this happens because we have multiple outgoing dial-peers with the same destination-pattern but to different FXO ports. How do I fix this ? I tried MGCP and it worked great but I faced this problem where the call counter started to count even when the other phone was on-Hook and ringing. I googled this problem and found this document from Cisco FXO Disconnect Problem. I tried the solutions from Cisco but nothing worked http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00800ae2d1.shtml http://www.cisco.com/en/US/docs/ios/12_2t/12_2t2/feature/guide/ft_ansds.html That's why I am trying with H323. Any suggestions would be appreciated. Regards,Mohamed Gazzaz CCIE Security #25719 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] How Do I tie a dial-peer with a specific FXO Port
Thanks, but this is not what I want. I want for example Fax machine connected to a ATA and has a Directory Number of 4410290. DN= 4410290 analog line connected to the PSTN and has the number of 4410290Fax machine 1-- ATA 1 --- CUCM -- H323 Gateway -- FXO port 1 -- PSTN DN= 4410277 analog line connected to the PSTN and has the number of 4410277Fax machine 2 -- ATA 2 --- CUCM -- H323 Gateway -- FXO port 2 -- PSTN Sometimes when Fax1 sends an outgoing fax, it goes out from FXO Port 2 which has the wrong number. How do I make outgoing faxes from Fax 1 always go out from FXO port 1 ? I hope it is clear now. Date: Sun, 31 Oct 2010 01:15:47 -0700 From: linuxbos...@gmail.com To: mgaz...@hotmail.com CC: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] How Do I tie a dial-peer with a specific FXO Port Hi Mohamed, You might have already tried but, POTS dialpeer discard explicitily defined digits. Try using prefix 411 and prefix 441 in respective dial-peers. Thanks Shrini On 10/31/2010 12:55 AM, Mohamed Gazzaz wrote: Hello Voice Experts, Here is the scenario : we have multiple analog lines and each one is connected to a FXO port and we want to tie some fax machines (Connected Via ATAs) to these analog lines. The ATAs are registered with the CUCM and I have configured the gateway as a H323 gateway. Route-patterns are configured on the CUCM and dial-peers are configured also on the gateway. My problem is when a fax machines ( 411xx90) sends an outgoing fax , it goes out from the wrong FXO port as 441xx77. I know this happens because we have multiple outgoing dial-peers with the same destination-pattern but to different FXO ports. How do I fix this ? I tried MGCP and it worked great but I faced this problem where the call counter started to count even when the other phone was on-Hook and ringing. I googled this problem and found this document from Cisco FXO Disconnect Problem. I tried the solutions from Cisco but nothing worked http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00800ae2d1.shtml http://www.cisco.com/en/US/docs/ios/12_2t/12_2t2/feature/guide/ft_ansds.html That's why I am trying with H323. Any suggestions would be appreciated. Regards, Mohamed Gazzaz CCIE Security #25719 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] Options to access the voice racks
Hi , What kind of phones do you guys/gals use to access the voice racks? and why would you choose a soft phone over physical phone or vice versa? Will I miss any benefits or features if I used soft phones? Thanks. Regards, Mohamed Gazzaz _ Hotmail: Trusted email with Microsoft’s powerful SPAM protection. https://signup.live.com/signup.aspx?id=60969___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Options to access the voice racks
Thanks Rogers and Vik for your clarifications. Does each online rack has 7965 phones? and can I use Phone Remote to control the actual phone on the rack ? More info on Phone Remote http://www.voipintegration.com/Software-Phone-Remote.aspx Regards, Mohamed Gazzaz CCIE Security #25719 From: vma...@ipexpert.com To: mgaz...@hotmail.com Subject: Re: [OSL | CCIE_Voice] Options to access the voice racks Date: Sat, 8 May 2010 12:31:41 -0700 CC: ccie_voice@onlinestudylist.com The best option is to use 7965 phones since this is what is used in the lab. This wlll require you to use a lower end cisco router for hw vpn and local phones. If you can't afford 7965 phones then 7962 phones are your next best thing. If you can't afford 7962 then use 7961 phones are ok although they do not support iLBC. If you want to use softphones then you can use ip blue and set the device type to 7965/2 and obviously CUPC. The only limitation is checking the directory when searching for a number in the missed/received calls directory. This is easily overcome by looking at the CDR. Vik Malhi - CCIE#13890 Senior Technical Instructor - IPexpert Inc Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Mailto: vma...@ipexpert.com Join IPexpert's Free CCIE Peer Groups Study Communities at www.IPexpert.com/communities On May 8, 2010, at 11:39 AM, Mohamed Gazzaz mgaz...@hotmail.com wrote: Hi , What kind of phones do you guys/gals use to access the voice racks? and why would you choose a soft phone over physical phone or vice versa? Will I miss any benefits or features if I used soft phones? Thanks. Regards, Mohamed Gazzaz Hotmail: Trusted email with Microsoft’s powerful SPAM protection. Sign up now. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com _ Hotmail: Trusted email with Microsoft’s powerful SPAM protection. https://signup.live.com/signup.aspx?id=60969___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Options to access the voice racks
Thank you so much. Date: Sat, 8 May 2010 16:15:42 -0700 Subject: Re: [OSL | CCIE_Voice] Options to access the voice racks From: vma...@ipexpert.com To: mgaz...@hotmail.com CC: ccie_voice@onlinestudylist.com This is a great tool to control phones remotely for your UCM sites - however you still need local phones (or IP Blue) for CME and SRST which constitute a major part of the CCIE Voice lab . So this software (which also has a cost) will not replace the need for local clients. Our philosophy is that if you are investing in local clients (61/2/5) you don’t need the newer model phones back in the rack of equipment and subsequently we have not invested in the 61/62/65 back in the rack (we use 7960 for Vlan/dhcp). I personally use the IP Blue multi-lab tool that supports every major feature required for you to help pass the CCIE Voice Lab. The only flaw is that it does not show the globalized Calling number in the Missed / Received calls log. This is very easily overcome by just checking the CDR using the CAR tool. See example below: I called my HQ Phone from the PSTN- the Calling number whilst the phone was ringing shows 011442077354765. If I had a hardware 7961/62/65 phone I could check the Missed / Received calls directory for the globalized #. In my case I use IP Blue and have to check the CDR via the CAR tool (virtually no setup time) to check for the globalized number. -- Vik Malhi – CCIE #13890 Instructor - IPexpert, Inc. Mailto: vma...@ipexpert.com Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Live Assistance, Please visit: www.ipexpert.com/chat http://www.ipexpert.com/chat IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, Audio Tools, Online Hardware Rental and Classroom Training for the Cisco CCIE (RS, Voice, Security Service Provider) certification(s) with training locations throughout the United States, Europe, South Asia and Australia. Be sure to visit our online communities at www.ipexpert.com/communities http://www.ipexpert.com/communities and our public website at www.ipexpert.com http://www.ipexpert.com/ From: Mohamed Gazzaz mgaz...@hotmail.com Date: Sat, 8 May 2010 23:02:30 +0300 To: vma...@ipexpert.com Cc: OSL Group ccie_voice@onlinestudylist.com Subject: RE: [OSL | CCIE_Voice] Options to access the voice racks Thanks Rogers and Vik for your clarifications. Does each online rack has 7965 phones? and can I use Phone Remote to control the actual phone on the rack ? More info on Phone Remote http://www.voipintegration.com/Software-Phone-Remote.aspx Regards, Mohamed Gazzaz CCIE Security #25719 From: vma...@ipexpert.com To: mgaz...@hotmail.com Subject: Re: [OSL | CCIE_Voice] Options to access the voice racks Date: Sat, 8 May 2010 12:31:41 -0700 CC: ccie_voice@onlinestudylist.com The best option is to use 7965 phones since this is what is used in the lab. This wlll require you to use a lower end cisco router for hw vpn and local phones. If you can't afford 7965 phones then 7962 phones are your next best thing. If you can't afford 7962 then use 7961 phones are ok although they do not support iLBC. If you want to use softphones then you can use ip blue and set the device type to 7965/2 and obviously CUPC. The only limitation is checking the directory when searching for a number in the missed/received calls directory. This is easily overcome by looking at the CDR. Vik Malhi - CCIE#13890 Senior Technical Instructor - IPexpert Inc Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Mailto: vma...@ipexpert.com mailto:vma...@ipexpert.com Join IPexpert's Free CCIE Peer Groups Study Communities at www.IPexpert.com/communities http://www.ipexpert.com/communities http://www.ipexpert.com/communities On May 8, 2010, at 11:39 AM, Mohamed Gazzaz mgaz...@hotmail.com wrote: Hi , What kind of phones do you guys/gals use to access the voice racks? and why would you choose a soft phone over physical phone or vice versa? Will I miss any benefits or features if I used soft phones? Thanks. Regards, Mohamed Gazzaz Hotmail: Trusted email with Microsoft’s powerful SPAM protection. Sign up now. https://signup.live.com/signup.aspx?id=60969 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com http://www.ipexpert.com/ http://www.ipexpert.com/ Hotmail: Trusted email with Microsoft’s powerful SPAM protection. Sign up now. https://signup.live.com/signup.aspx?id=60969 _ Hotmail: Trusted email with Microsoft’s powerful SPAM protection. https://signup.live.com/signup.aspx?id=60969___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com