To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] Outgoing Calls via T1 failed
Hi all,
After configuring my HQ GW as MGCP, then configure my T1 to register with
cucm , I was govern by the lack of the DSP resources, which force me to
define only 16 channel out of the 23 on my pri-group
Dears,
Thanks for your input , I'll try the suggested and let you know..
but do you think changing the value of the Service Parameters -- CCM--
change B-channale status to = s0/su0/...@ VGname
=. affect my configuration ?
Regards
On Sat, Mar 23, 2013 at 3:59 AM,
Well, I configured the pri-timeslots 1-16, because I have no dsp to
configure all the 23 b-channels .
On Sun, Mar 24, 2013 at 12:44 AM, Edgar Feliz ejzi...@gmail.com wrote:
Are you sure the PSTN router has 1-16 configured for that GW. I had a
similar issue because I had forgotten what I had
Hi all,
After configuring my HQ GW as MGCP, then configure my T1 to register with
cucm , I was govern by the lack of the DSP resources, which force me to
define only 16 channel out of the 23 on my pri-group under the T1
controller configuration !!
here is the config :
controller T1 0/0/0
Is your gateway registered in CUCM?
Are you getting the proper output of your show commands? Show isdn status,
show ccm
Do you have
int seri x/x/x
Isdn bind-l3 ccm
Did you try no MGCP MGCP?
Can you post more of your config?
Sent from my iPad
On Mar 22, 2013, at 4:52 PM, CCIEing
Your debug output has a few clues...but I can't recall offhand if channel
16 in that debug starts at 1 (meaning this is the 16th channel) or 0
(meaning this is the 17th channel). Do inbound calls from pstn work? If
yes, its more likely the second option.
In the first case, it would appear your