[OSL | CCIE_Voice] [GATEKEEPER DIAL FROM BR23001 TO BR11002 GET YOU'RE CALL CANNOT BE COMPLETED AS DIALED]
I cannot complete calls from BR2 CME to BR1 or HQ using gatekeeper on HQ-RTR. I've verified the Gateway in CUCM and the Gatekeeper in CUCM and the Trunk and still calls will not complete from CME to either BR1 or HQ Phones. I've double checked everything. I've reset the gateway, trunk and CUCM service on Sub and Pub. When I dial from CME 3001 to BR1 or HQ - I get the message your call cannot be completed as dialed. Any assistance or suggestions would be appreciated. I match the tech prefix and the zone prefix but still nothing happens. I must be missing something. Gatekeeper is giving me brain damage! GATEKEEPER CONFIGURATION gatekeeper; zone local PL ipexpert.com; zone prefix PL 1... gw-priority 10 gk-trunk_2; zone prefix PL 1... gw-priority 9 gk-trunk_1; zone prefix PL 1... gw-priority 0 BR2-RTR; zone prefix PL 5... gw-priority 10 gk-trunk_2; zone prefix PL 5... gw-priority 9 gk-trunk_1; zone prefix PL 5... gw-priority 0 BR2-RTR; gw-type-prefix 1#*; no shutdown; !; BR2 BR2-RTR#show gateway H.323 ITU-T Version: 4.0 H323 Stack Version: 0.1 H.323 service is up Gateway BR2-RTR is registered to Gatekeeper PL Alias list (CLI configured) E164-ID 3001 H323-ID BR2-RTR Alias list (last RCF) E164-ID 3001 H323-ID BR2-RTR H323 resource thresholding is Disabled ! _ BR2 Dialpeer dial-peer voice 15 voip destination-pattern [15]... voice-class codec 1 session target ras tech-prefix 1# no vad ! __ HQ-RTR#show gatek gw GATEWAY TYPE PREFIX TABLE = Prefix: 1#* Zone PL master gateway list: 10.10.210.10:1720 gk-trunk_1 10.10.210.11:1720 gk-trunk_2 Zone PL prefix 5... priority gateway list(s): Priority 10: 10.10.210.11:1720 gk-trunk_2 Priority 9: 10.10.210.10:1720 gk-trunk_1 Zone PL prefix 1... priority gateway list(s): Priority 10: 10.10.210.11:1720 gk-trunk_2 Priority 9: 10.10.210.10:1720 gk-trunk_1 Prefix: 3* Zone PL master gateway list: 10.10.110.3:1820 BR2-RTR Zone PL prefix 5... priority gateway list(s): Zone PL prefix 1... priority gateway list(s): ___ HQ-RTR#show gatek end GATEKEEPER ENDPOINT REGISTRATION CallSignalAddr Port RASSignalAddr Port Zone Name TypeFlags --- - --- - - - 10.10.110.3 1820 10.10.110.3 61503 PLH323-GW E164-ID: 3001 H323-ID: BR2-RTR Voice Capacity Max.= Avail.= Current.= 0 10.10.210.101720 10.10.210.1032816 PLVOIP-GW H323-ID: gk-trunk_1 Voice Capacity Max.= Avail.= Current.= 0 10.10.210.111720 10.10.210.1133215 PLVOIP-GW H323-ID: gk-trunk_2 Voice Capacity Max.= Avail.= Current.= 0 Total number of active registrations = 3 ON BR2-RTR-DEBUG VOIP DIALPEER; 02:08:41: //-1//DPM/dpMatchPeers:; Result=SUCCESS(0) ; List of Matched Outgoing Dial-peer(s):; 1: Dial-peer Tag=15; __ ON HQ-RTR-DEBUG GATEK MAIN 10; ////GK/gk_rassrv_sep_arq: ARQ Didn't use GK_AAA_PROC; //701F5FE8804E/701F5FE88050/GK/gk_dns_query: No Name servers; //701F5FE8804E/701F5FE88050/GK/rassrv_get_addrinfo: (1#1002) Matched tech-prefix 1#; //701F5FE8804E/701F5FE88050/GK/rassrv_get_addrinfo: (1#1002) Matched zone prefix 1 and remainder 002; ////GK/gk_rassrv_get_ingress_network: ARQ non-std ingress network = 1; //701F5FE8804E/701F5FE88050/GK/rassrv_arq_select_viazone: about to check the source side, src_zonep=0x49D60364; //701F5FE8804E/701F5FE88050/GK/rassrv_arq_select_viazone: matched zone is PL, and z_invianamelen=0; \//701F5FE8804E/701F5FE88050/GK/rassrv_arq_select_viazone: about to check the destination side, dst_zonep=0x49D60364; //701F5FE8804E/701F5FE88050/GK/rassrv_arq_select_viazone: matched zone is PL, and z_outvianamelen=0; ////GK/gk_rassrv_get_ingress_network: ARQ non-std ingress network = 1; ////GK/gk_process: QUEUE_EVENT (minor 0) wakeup; ////GK/gk_rassrv_brq: state = 0xF; ////GK/gk_rassrv_brq: brqp=0x49F7CF84, crv=0xF, bandWidth=160gk)#; __ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] [GATEKEEPER DIAL FROM BR23001 TO BR11002 GET YOU'RE CALL CANNOT BE COMPLETED AS DIALED]
Hi Mike, Have you stripped off the tech prefix on CUCM? If not, add a Translation Pattern in the none partition: 1#.[23]XXX with a DDI of Pre-dot (assuming your extensions at HQ and BR1 are 2XXX and 3XXX respectively - modify as set up in your lab). On Sun, Aug 21, 2011 at 11:59 PM, ccie_voice-requ...@onlinestudylist.comwrote: Send CCIE_Voice mailing list submissions to ccie_voice@onlinestudylist.com To subscribe or unsubscribe via the World Wide Web, visit http://onlinestudylist.com/mailman/listinfo/ccie_voice or, via email, send a message with subject or body 'help' to ccie_voice-requ...@onlinestudylist.com You can reach the person managing the list at ccie_voice-ow...@onlinestudylist.com When replying, please edit your Subject line so it is more specific than Re: Contents of CCIE_Voice digest... Today's Topics: 1. Re: Unable to access Proctorlabs.com (Rrcrumm) 2. Re: Unable to access Proctorlabs.com (Marko Milivojevic) 3. [GATEKEEPER DIAL FROM BR23001 TO BR11002 GET YOU'RE CALL CANNOT BE COMPLETED AS DIALED] (michael.se...@compucom.com) -- Message: 1 Date: Sun, 21 Aug 2011 09:41:00 -0700 From: Rrcrumm rrcr...@yahoo.com To: Nish Tarpara nishi...@hotmail.com Cc: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com, supp...@ipexpert.com supp...@ipexpert.com Subject: Re: [OSL | CCIE_Voice] Unable to access Proctorlabs.com Message-ID: fc56a4bc-a260-4bb7-b244-14b74965c...@yahoo.com Content-Type: text/plain; charset=us-ascii Did you open a support ticket Rc Sent from my iPhone On Aug 20, 2011, at 9:24 PM, Nish Tarpara nishi...@hotmail.com wrote: Hi, I am unable to access or open proctorlabs.com site. getting below error. Server Error The server encountered an internal error and was unable to complete your request.JRun closed connection. Regards, Nish ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- next part -- An HTML attachment was scrubbed... URL: /archives/ccie_voice/attachments/20110821/f9ca4717/attachment-0001.html -- Message: 2 Date: Sun, 21 Aug 2011 10:11:46 -0700 From: Marko Milivojevic mar...@ipexpert.com To: Nish Tarpara nishi...@hotmail.com Cc: ccie_voice@onlinestudylist.com, supp...@ipexpert.com Subject: Re: [OSL | CCIE_Voice] Unable to access Proctorlabs.com Message-ID: CAGDYm0xp5VUqwBWKOmH=zw7bt1d_bogrvq1cgmgwy3iwyty...@mail.gmail.com Content-Type: text/plain; charset=UTF-8 Hi, there was a downtime this morning. Whenever this happens, please get in touch with support at supp...@ipexpert.com and supp...@proctorlabs.com. That way, our support guys can work on the problem immediately, unless they're working on it already. Is everything OK now? -- Marko Milivojevic - CCIE #18427 Senior Technical Instructor - IPexpert FREE CCIE training: http://bit.ly/vLecture Mailto: mar...@ipexpert.com Telephone: +1.810.326.1444 Web: http://www.ipexpert.com/ On Sat, Aug 20, 2011 at 21:24, Nish Tarpara nishi...@hotmail.com wrote: Hi, I am unable to access or open proctorlabs.com site. getting below error. Server Error The server encountered an internal error and was unable to complete your request.JRun closed connection. Regards, Nish ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- Message: 3 Date: Sun, 21 Aug 2011 14:29:29 -0400 From: michael.se...@compucom.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] [GATEKEEPER DIAL FROM BR23001 TO BR11002 GET YOU'RE CALL CANNOT BE COMPLETED AS DIALED] Message-ID: 426D14439C8C604B90E332DD4696917301AD2D2BD9@SP049EXC32.compucom.local Content-Type: text/plain; charset=us-ascii I cannot complete calls from BR2 CME to BR1 or HQ using gatekeeper on HQ-RTR. I've verified the Gateway in CUCM and the Gatekeeper in CUCM and the Trunk and still calls will not complete from CME to either BR1 or HQ Phones. I've double checked everything. I've reset the gateway, trunk and CUCM service on Sub and Pub. When I dial from CME 3001 to BR1 or HQ - I get the message your call cannot be completed as dialed. Any assistance or suggestions would be appreciated. I match the tech prefix and the zone prefix but still nothing happens. I must be missing something. Gatekeeper is giving me brain damage! GATEKEEPER CONFIGURATION gatekeeper; zone local PL ipexpert.com; zone prefix PL 1...
Re: [OSL | CCIE_Voice] [GATEKEEPER DIAL FROM BR23001 TO BR11002 GET YOU'RE CALL CANNOT BE COMPLETED AS DIALED]
Hi Michael - is your gkp trunk set to 4 digits in cucm? b On Sun, Aug 21, 2011 at 7:29 PM, michael.se...@compucom.com wrote: I cannot complete calls from BR2 CME to BR1 or HQ using gatekeeper on HQ-RTR. I’ve verified the Gateway in CUCM and the Gatekeeper in CUCM and the Trunk and still calls will not complete from CME to either BR1 or HQ Phones. I’ve double checked everything. I’ve reset the gateway, trunk and CUCM service on Sub and Pub. When I dial from CME 3001 to BR1 or HQ – I get the message your call cannot be completed as dialed. Any assistance or suggestions would be appreciated. I match the tech prefix and the zone prefix but still nothing happens. I must be missing something. Gatekeeper is giving me brain damage! ** ** GATEKEEPER CONFIGURATION gatekeeper; zone local PL ipexpert.com; zone prefix PL 1... gw-priority 10 gk-trunk_2; zone prefix PL 1... gw-priority 9 gk-trunk_1; zone prefix PL 1... gw-priority 0 BR2-RTR; zone prefix PL 5... gw-priority 10 gk-trunk_2; zone prefix PL 5... gw-priority 9 gk-trunk_1; zone prefix PL 5... gw-priority 0 BR2-RTR; gw-type-prefix 1#*; no shutdown; !; BR2 BR2-RTR#show gateway H.323 ITU-T Version: 4.0 H323 Stack Version: 0.1 ** ** H.323 service is up Gateway BR2-RTR is registered to Gatekeeper PL ** ** Alias list (CLI configured) E164-ID 3001 H323-ID BR2-RTR Alias list (last RCF) E164-ID 3001 H323-ID BR2-RTR ** ** H323 resource thresholding is Disabled ! _ BR2 Dialpeer dial-peer voice 15 voip destination-pattern [15]... voice-class codec 1 session target ras tech-prefix 1# no vad ! ** ** __ HQ-RTR#show gatek gw GATEWAY TYPE PREFIX TABLE = Prefix: 1#* Zone PL master gateway list: 10.10.210.10:1720 gk-trunk_1 10.10.210.11:1720 gk-trunk_2 Zone PL prefix 5... priority gateway list(s): Priority 10: 10.10.210.11:1720 gk-trunk_2 Priority 9: 10.10.210.10:1720 gk-trunk_1 Zone PL prefix 1... priority gateway list(s): Priority 10: 10.10.210.11:1720 gk-trunk_2 Priority 9: 10.10.210.10:1720 gk-trunk_1 ** ** Prefix: 3* Zone PL master gateway list: 10.10.110.3:1820 BR2-RTR Zone PL prefix 5... priority gateway list(s): Zone PL prefix 1... priority gateway list(s): ___ HQ-RTR#show gatek end GATEKEEPER ENDPOINT REGISTRATION CallSignalAddr Port RASSignalAddr Port Zone Name TypeFlags --- - --- - - - 10.10.110.3 1820 10.10.110.3 61503 PLH323-GW E164-ID: 3001 H323-ID: BR2-RTR Voice Capacity Max.= Avail.= Current.= 0 10.10.210.101720 10.10.210.1032816 PLVOIP-GW H323-ID: gk-trunk_1 Voice Capacity Max.= Avail.= Current.= 0 10.10.210.111720 10.10.210.1133215 PLVOIP-GW H323-ID: gk-trunk_2 Voice Capacity Max.= Avail.= Current.= 0 Total number of active registrations = 3 ON BR2-RTR-DEBUG VOIP DIALPEER; 02:08:41: //-1//DPM/dpMatchPeers:; Result=SUCCESS(0) ; List of Matched Outgoing Dial-peer(s):; 1: Dial-peer Tag=15; __ ON HQ-RTR-DEBUG GATEK MAIN 10; ////GK/gk_rassrv_sep_arq: ARQ Didn't use GK_AAA_PROC; //701F5FE8804E/701F5FE88050/GK/gk_dns_query: No Name servers; //701F5FE8804E/701F5FE88050/GK/rassrv_get_addrinfo: (1#1002) Matched tech-prefix 1#; //701F5FE8804E/701F5FE88050/GK/rassrv_get_addrinfo: (1#1002) Matched zone prefix 1 and remainder 002; ////GK/gk_rassrv_get_ingress_network: ARQ non-std ingress network = 1; //701F5FE8804E/701F5FE88050/GK/rassrv_arq_select_viazone: about to check the source side, src_zonep=0x49D60364; //701F5FE8804E/701F5FE88050/GK/rassrv_arq_select_viazone: matched zone is PL, and z_invianamelen=0; \//701F5FE8804E/701F5FE88050/GK/rassrv_arq_select_viazone: about to check the destination side, dst_zonep=0x49D60364; //701F5FE8804E/701F5FE88050/GK/rassrv_arq_select_viazone:
Re: [OSL | CCIE_Voice] [GATEKEEPER DIAL FROM BR23001 TO BR11002 GET YOU'RE CALL CANNOT BE COMPLETED AS DIALED]
Hi Mike, A few suggestions. CUCM Trunk have a CSS assigned to it that can see the partition that the phones are in? Add dtmf-relay h245-alphanumeric h245-signal to your dial-peer 15. Since the destination phone isn't ringing, turn up 'debug ras' on BR2 and the gatekeeper. Check that for any errors. Hope that helps, Jeff - Original Message - From: michael.se...@compucom.com To: ccie_voice@onlinestudylist.com Sent: Sunday, August 21, 2011 11:29 AM Subject: [OSL | CCIE_Voice] [GATEKEEPER DIAL FROM BR23001 TO BR11002 GET YOU'RE CALL CANNOT BE COMPLETED AS DIALED] I cannot complete calls from BR2 CME to BR1 or HQ using gatekeeper on HQ-RTR. I've verified the Gateway in CUCM and the Gatekeeper in CUCM and the Trunk and still calls will not complete from CME to either BR1 or HQ Phones. I've double checked everything. I've reset the gateway, trunk and CUCM service on Sub and Pub. When I dial from CME 3001 to BR1 or HQ - I get the message your call cannot be completed as dialed. Any assistance or suggestions would be appreciated. I match the tech prefix and the zone prefix but still nothing happens. I must be missing something. Gatekeeper is giving me brain damage! GATEKEEPER CONFIGURATION gatekeeper; zone local PL ipexpert.com; zone prefix PL 1... gw-priority 10 gk-trunk_2; zone prefix PL 1... gw-priority 9 gk-trunk_1; zone prefix PL 1... gw-priority 0 BR2-RTR; zone prefix PL 5... gw-priority 10 gk-trunk_2; zone prefix PL 5... gw-priority 9 gk-trunk_1; zone prefix PL 5... gw-priority 0 BR2-RTR; gw-type-prefix 1#*; no shutdown; !; BR2 BR2-RTR#show gateway H.323 ITU-T Version: 4.0 H323 Stack Version: 0.1 H.323 service is up Gateway BR2-RTR is registered to Gatekeeper PL Alias list (CLI configured) E164-ID 3001 H323-ID BR2-RTR Alias list (last RCF) E164-ID 3001 H323-ID BR2-RTR H323 resource thresholding is Disabled ! _ BR2 Dialpeer dial-peer voice 15 voip destination-pattern [15]... voice-class codec 1 session target ras tech-prefix 1# no vad ! __ HQ-RTR#show gatek gw GATEWAY TYPE PREFIX TABLE = Prefix: 1#* Zone PL master gateway list: 10.10.210.10:1720 gk-trunk_1 10.10.210.11:1720 gk-trunk_2 Zone PL prefix 5... priority gateway list(s): Priority 10: 10.10.210.11:1720 gk-trunk_2 Priority 9: 10.10.210.10:1720 gk-trunk_1 Zone PL prefix 1... priority gateway list(s): Priority 10: 10.10.210.11:1720 gk-trunk_2 Priority 9: 10.10.210.10:1720 gk-trunk_1 Prefix: 3* Zone PL master gateway list: 10.10.110.3:1820 BR2-RTR Zone PL prefix 5... priority gateway list(s): Zone PL prefix 1... priority gateway list(s): ___ HQ-RTR#show gatek end GATEKEEPER ENDPOINT REGISTRATION CallSignalAddr Port RASSignalAddr Port Zone Name TypeFlags --- - --- - - - 10.10.110.3 1820 10.10.110.3 61503 PLH323-GW E164-ID: 3001 H323-ID: BR2-RTR Voice Capacity Max.= Avail.= Current.= 0 10.10.210.101720 10.10.210.1032816 PLVOIP-GW H323-ID: gk-trunk_1 Voice Capacity Max.= Avail.= Current.= 0 10.10.210.111720 10.10.210.1133215 PLVOIP-GW H323-ID: gk-trunk_2 Voice Capacity Max.= Avail.= Current.= 0 Total number of active registrations = 3 ON BR2-RTR-DEBUG VOIP DIALPEER; 02:08:41: //-1//DPM/dpMatchPeers:; Result=SUCCESS(0) ; List of Matched Outgoing Dial-peer(s):; 1: Dial-peer Tag=15; __ ON HQ-RTR-DEBUG GATEK MAIN 10; ////GK/gk_rassrv_sep_arq: ARQ Didn't use GK_AAA_PROC; //701F5FE8804E/701F5FE88050/GK/gk_dns_query: No Name servers; //701F5FE8804E/701F5FE88050/GK/rassrv_get_addrinfo: (1#1002) Matched tech-prefix 1#; //701F5FE8804E/701F5FE88050/GK/rassrv_get_addrinfo: (1#1002) Matched zone prefix 1 and remainder 002; ////GK/gk_rassrv_get_ingress_network: ARQ non-std ingress network = 1; //701F5FE8804E/701F5FE88050/GK/rassrv_arq_select_viazone: about to check the source side, src_zonep=0x49D60364; //701F5FE8804E/701F5FE88050/GK/rassrv_arq_select_viazone: matched zone is PL, and z_invianamelen=0;
Re: [OSL | CCIE_Voice] [GATEKEEPER DIAL FROM BR23001 TO BR11002 GET YOU'RE CALL CANNOT BE COMPLETED AS DIALED]
I guess it's codec and region mismatch between CM trunk and CME dialpeer. Regards. Khaled From: michael.se...@compucom.com To: ccie_voice@onlinestudylist.com Date: Sun, 21 Aug 2011 14:29:29 -0400 Subject: [OSL | CCIE_Voice] [GATEKEEPER DIAL FROM BR23001 TO BR11002 GET YOU'RE CALL CANNOT BE COMPLETED AS DIALED] I cannot complete calls from BR2 CME to BR1 or HQ using gatekeeper on HQ-RTR. I’ve verified the Gateway in CUCM and the Gatekeeper in CUCM and the Trunk and still calls will not complete from CME to either BR1 or HQ Phones. I’ve double checked everything. I’ve reset the gateway, trunk and CUCM service on Sub and Pub. When I dial from CME 3001 to BR1 or HQ – I get the message your call cannot be completed as dialed. Any assistance or suggestions would be appreciated. I match the tech prefix and the zone prefix but still nothing happens. I must be missing something. Gatekeeper is giving me brain damage! GATEKEEPER CONFIGURATION gatekeeper; zone local PL ipexpert.com; zone prefix PL 1... gw-priority 10 gk-trunk_2; zone prefix PL 1... gw-priority 9 gk-trunk_1; zone prefix PL 1... gw-priority 0 BR2-RTR; zone prefix PL 5... gw-priority 10 gk-trunk_2; zone prefix PL 5... gw-priority 9 gk-trunk_1; zone prefix PL 5... gw-priority 0 BR2-RTR; gw-type-prefix 1#*; no shutdown; !; BR2 BR2-RTR#show gateway H.323 ITU-T Version: 4.0 H323 Stack Version: 0.1 H.323 service is up Gateway BR2-RTR is registered to Gatekeeper PL Alias list (CLI configured) E164-ID 3001 H323-ID BR2-RTR Alias list (last RCF) E164-ID 3001 H323-ID BR2-RTR H323 resource thresholding is Disabled ! _ BR2 Dialpeer dial-peer voice 15 voip destination-pattern [15]... voice-class codec 1 session target ras tech-prefix 1# no vad ! __ HQ-RTR#show gatek gw GATEWAY TYPE PREFIX TABLE = Prefix: 1#* Zone PL master gateway list: 10.10.210.10:1720 gk-trunk_1 10.10.210.11:1720 gk-trunk_2 Zone PL prefix 5... priority gateway list(s): Priority 10: 10.10.210.11:1720 gk-trunk_2 Priority 9: 10.10.210.10:1720 gk-trunk_1 Zone PL prefix 1... priority gateway list(s): Priority 10: 10.10.210.11:1720 gk-trunk_2 Priority 9: 10.10.210.10:1720 gk-trunk_1 Prefix: 3* Zone PL master gateway list: 10.10.110.3:1820 BR2-RTR Zone PL prefix 5... priority gateway list(s): Zone PL prefix 1... priority gateway list(s): ___ HQ-RTR#show gatek end GATEKEEPER ENDPOINT REGISTRATION CallSignalAddr Port RASSignalAddr Port Zone Name TypeFlags --- - --- - - - 10.10.110.3 1820 10.10.110.3 61503 PLH323-GW E164-ID: 3001 H323-ID: BR2-RTR Voice Capacity Max.= Avail.= Current.= 0 10.10.210.101720 10.10.210.1032816 PLVOIP-GW H323-ID: gk-trunk_1 Voice Capacity Max.= Avail.= Current.= 0 10.10.210.111720 10.10.210.1133215 PLVOIP-GW H323-ID: gk-trunk_2 Voice Capacity Max.= Avail.= Current.= 0 Total number of active registrations = 3 ON BR2-RTR-DEBUG VOIP DIALPEER; 02:08:41: //-1//DPM/dpMatchPeers:; Result=SUCCESS(0) ; List of Matched Outgoing Dial-peer(s):; 1: Dial-peer Tag=15; __ ON HQ-RTR-DEBUG GATEK MAIN 10; ////GK/gk_rassrv_sep_arq: ARQ Didn't use GK_AAA_PROC; //701F5FE8804E/701F5FE88050/GK/gk_dns_query: No Name servers; //701F5FE8804E/701F5FE88050/GK/rassrv_get_addrinfo: (1#1002) Matched tech-prefix 1#; //701F5FE8804E/701F5FE88050/GK/rassrv_get_addrinfo: (1#1002) Matched zone prefix 1 and remainder 002; ////GK/gk_rassrv_get_ingress_network: ARQ non-std ingress network = 1; //701F5FE8804E/701F5FE88050/GK/rassrv_arq_select_viazone: about to check the source side, src_zonep=0x49D60364; //701F5FE8804E/701F5FE88050/GK/rassrv_arq_select_viazone: matched zone is PL, and z_invianamelen=0; \//701F5FE8804E/701F5FE88050/GK/rassrv_arq_select_viazone: about to check the destination side, dst_zonep=0x49D60364; //701F5FE8804E/701F5FE88050/GK/rassrv_arq_select_viazone: matched zone is PL, and z_outvianamelen=0; ////GK/gk_rassrv_get_ingress_network: ARQ non-std ingress network = 1; ////GK/gk_process: QUEUE_EVENT (minor 0) wakeup; ////GK/gk_rassrv_brq: state = 0xF; ////GK/gk_rassrv_brq: brqp=0x49F7CF84, crv=0xF, bandWidth=160gk)#;
