Hi
Please check
This is MGCP router
this router is configured as MGCP fallback SRST
voice-port 0/1/0
description Cheadle FAX
station-id name Cheadle FAX
station-id number 5867
caller-id enable
!
voice-port 0/1/1
station-id name Cheadle FAX
station-id number 5869
caller-id enable
ccm-manager switchback immediate
ccm-manager fallback-mgcp
ccm-manager redundant-host 172.16.5.11
ccm-manager mgcp
no ccm-manager fax protocol cisco
ccm-manager music-on-hold
ccm-manager config server 172.16.5.12
ccm-manager config
dial-peer voice 102 pots
corlist incoming International
corlist outgoing International
service mgcpapp
destination-pattern 9.T
incoming called-number .
direct-inward-dial
port 0/1/1
dial-peer voice 100 pots
corlist incoming International
corlist outgoing International
service mgcpapp
destination-pattern 9.T
incoming called-number .
direct-inward-dial
port 0/1/0
!
On 8/21/13, Justin Carney justin.s.car...@gmail.com wrote:
Are there any other voice ports on this mgcp gw (pri) and is the gateway
registered to cucm (show ccm-manager). If not, you need to fix that first,
start with the commands below and allow cucm to build the rest of the cli:
Ccm config server (ip address)
Ccm config
(If you have ip domain-name... set on router cli make sure cucm is
configured with fqdn such as routerhostname.domainname.com or it won't
register)
Beyond gw registration, there is more config on the cli not shown on your
email - do you have dial peers? (Show dial-peer voice summary). If not,
you'll need something similar to this:
Dial-peer voice 1 pots
Application MGCPAPP
Port 0/1/0
Dial-peer voice 2 pots
Application MGCPAPP
Port 0/1/1
The link below shows a sample config of setting up an fxs/fxo port on an
ios gw. Have you already read this (or similar) and completed all steps?
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a008017787b.shtml
The study list would be able to help more if you post your full config and
provide more detail about what is working and what is not.
More things to check and provide info to the group so we can help: Gw
registered? Any other pri on gw working? Cucm conf good - gw, route
pattern, etc and DNA says it will route the call outbound? Are both
inbound and outbound fax calls failing or just one way? Can you call the
fax on net (from an ip phone or other analog device) and it rings? What
codecs and are you using modem passthru/relay? Lan only or lan and wan
between 2 fax or fax and pstn?)
On Aug 20, 2013 6:18 AM, Dharambir kumar varma dharambi...@gmail.com
wrote:
Hi
My faxes are not working...
where should i checkMy router is MGCP gateway...
Below are config on Mgcp router..
voice-port 0/1/0
description Cheadle FAX
station-id name Cheadle FAX
station-id number 5867
caller-id enable
!
voice-port 0/1/1
station-id name Cheadle FAX
station-id number 5869
caller-id enable
--
Regards,
Dharambir Kumar
___
For more information regarding industry leading CCIE Lab training, please
visit www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
--
Regards,
Dharambir Kumar
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com